It would seem we can not leave great alone - and have improved our Dana 60 Arms again!

http://www.northwestfab.com/images/steering/NEWd60arm1.jpg

We can safetly say that they are the most feature packed D60 Steering Arms available. Our Key features include:


- Ackerman Steering Geometry. These are the first foreward facing arms that correct steering geometry. Current standard D60 arms on the market today cause an inconsistent change in each tires turning radii. The direct result is the outside tire 'scrubbing' along the ground when a corner is navigated. The corrected geometry built into our arms results in tires tracking smoothly and greater traction.

Here is a picture illustrating Ackerman steering geometry. Note how the outer and inner wheel are consistently perpindicular to the line drawn from the center of the turning radius.

http://www.northwestfab.com/images/steering/ackerman.png
** These arms do not place the tie-rod behind axle as illustrated in picture **

While having this geometry, we are still able to clear a H1 / HMMWV Rim Mounted On Single Rear Wheel Hubs.

- Kingpin Spring is eliminated as a preload system is integrated into the billet steering arm body.

http://www.northwestfab.com/images/steering/NEWd60arm2.jpg

- Geometry adjusted for steering and kingpin Axis Inclination Angle - Resulting in a perfectly paralell surface between arms.

- They are the only Dana 60 arms that are raised for leafpack clearance!

http://www.northwestfab.com/images/steering/d60side.JPG

http://www.northwestfab.com/images/steering/d60side2.JPG

- Grease Zerk Fitting for easy Kingpin lubrication.

- Tapered For Tie Rod Ends or Drilled For 3/4" Heims at no extra cost.

http://www.northwestfab.com/images/steering/NEWd60arm3.jpg

- 5th and 6th Hole compatablility for Aftermarket Dedenbear/Reid Racing Knuckles.

- Strong! - 1.5" Thick at the knuckle mounting surface.

- 100% CNC'd from Billet Steel.

Even with the upgrades, we have shaved $20 off per arm . These new D60 arms are...
$149 ea.

We offer these in a complete CROSSOVER and HIGH-STEER kit. (http://www.northwestfab.com/complete60kit.html)

To order - drop us a line at the shop - always happy to take orders or help.

-NWF

What is the distance from the KP centerline to the drag link hole? on the PS arms?

does running the steering behind the axle affect the geometry?

What is the distance from the KP centerline to the drag link hole? on the PS arms?

8" From KP center to DL hole.

does running the steering behind the axle affect the geometry?

You would want to use our double passenger arm system, keeps the ackerman in check. We will be releasing them in the next few weeks once we get the standards all loaded up on the web.

-Kyle.

another great product -----good work guys

8" From KP center to DL hole.

Are you offering a pitman with a similar (length) radius?

I had some issues getting full angles out of my D60, and ended up matching the pitman (WJ) with the highsteer arm (PSC)

At 8" I would hard pressed to find an OE pitman that would work... unless I go with a "Swingset" style linkage system.

Or am I missing something?:confused:

Are you offering a pitman with a similar (length) radius?

I had some issues getting full angles out of my D60, and ended up matching the pitman (WJ) with the highsteer arm (PSC)

At 8" I would hard pressed to find an OE pitman that would work... unless I go with a "Swingset" style linkage system.

Or am I missing something?:confused:

We designed the length to accomodate the throw of fullsize saginaw boxes, but if you need a hole at a different dimension just let us know.

-Kyle.

do you gonna make a kit for ''full hydro'' high steer with your new bearing option ? for dana-60...


Thank you .

do you gonna make a kit for ''full hydro'' high steer with your new bearing option ? for dana-60...


Thank you .

Yes, I will try to get it uploaded today for you. They are in stock.

do you have these high steer arms with two holes on each arm? for cross-over and for hydro assist?

Thank you for your reply to my inqury. Could you tell us if these arms will help get a tie rod well above the leaf springs? Maybe post up a side shot so we can see how much rise they provide over the kingpin mounting surface. :-)

do you gonna make a kit for ''full hydro'' high steer with your new bearing option ? for dana-60...

Thank you .

yes! and the arms are available as of now.

do you have these high steer arms with two holes on each arm? for cross-over and for hydro assist?


Here's a few pics of our hydro arms. Were putting an ad for them now. We can ship these blank, drill for heims, or rod ends where you want them.

http://www.northwestfab.com/images/steering/d60hydro3.JPG

http://www.northwestfab.com/images/steering/d60hydro2.JPG

http://www.northwestfab.com/images/steering/d60hydro1.JPG

Thank you for your reply to my inqury. Could you tell us if these arms will help get a tie rod well above the leaf springs? Maybe post up a side shot so we can see how much rise they provide over the kingpin mounting surface. :-)

http://www.northwestfab.com/images/steering/d60side.JPG

http://www.northwestfab.com/images/steering/d60side2.JPG

Just finishing up another batch of these arms, will ship by the end of the week.

Steerings arms are finished and ready to ship!!

In stock and ready to ship.

We have everything in stock, and ready to be made into a hi-steer or crossover kit call us today to get yours!!

NWF Crossover and HI-Steer kits make the perfect gift for your Rig :)

Lots in stock call us today to order yours!!

When i click on your link it takes me to some fawking page that says u need to update yur domain.....WTF?:shaking:

When i click on your link it takes me to some fawking page that says u need to update yur domain.....WTF?:shaking:

Working on it!

Steering arms in stock!!!

in stock and ready to ship.

Bump!!

Double Arms are in stock as well.

Bump

All D60 arms are in stock and ready to ship.

Lots is stock and ready to ship!

Till the end of the week we are offering these dana 60 arms for $135ea or a pair for $269.

Last Day to order these at the sale price!!

Sale extened to the end of this week!

Sale is still on till the end of this week.

Bump for Savings $$$

Sales over but we have lots in stock and are ready to ship!

Bump!! Ships same day!

half way through a new batch will be ready to ship monday or tuesday!!

Arms are ready to ship call to place your order.

250-248-6024

Question on Full hydro arms sent..

Lots in stock!

In stock and ready to ship!

have any pics of crossover installed on Ford HP 60?

have any pics of crossover installed on Ford HP 60?

http://www.northwestfab.com/dana60arminstall.html

Lots in stock and ready to ship!

New Batch is complete we have in stock 17 Passenger and 10 Driver.

Lots in stock and ready to ship.

Thanks for the orders only have 2 driver side arms and 7 passenger arms left is stock.

Kris

We also sell the King Pin Spring eliminator caps for $49

Sold a bunch of steering arms today, Thanks for the orders. only 2 passenger, 1 driver and 5 spring eliminator caps left in stock. Next batch will be done in about 2 weeks.

Kris

Just started machining a double batch of Arms today should be done in around a week and a half.

NWF

Passenger side Steering Arms in stock again, Driver side Arms are in the mill as we speak.

really like the Ackerman steering geometry design. def going onto my next build.

since these arms are set up to eliminate the Kingpin Spring is there an bushing of some kind you guys make to go with these arms? i didnt see one on your web site.

looks like i have an 89' kingpin ford d-60 thats going to get an set of these soon.

thanks

When will you have a set of highsteer arms for a '86+ Ford Kingpin 60 in stock?
And can I get one of the holes in the passenger side arm tapered for the following TRE's?


TRE, High Angle Drag Link, ES2027

This is a GM 1 Ton Tie Rod End made specifically for use as a Draglink. The Draglink TRE will travel farther than a Standard TRE.

The Draglink TRE has a slightly larger taper than a Standard TRE, .795" vs .749" so the taper must be deeper for the Draglink.

If so how much for a set of arms with arp studs and hardware?
Thanks.

When will you have a set of highsteer arms for a '86+ Ford Kingpin 60 in stock?
And can I get one of the holes in the passenger side arm tapered for the following TRE's?


TRE, High Angle Drag Link, ES2027

This is a GM 1 Ton Tie Rod End made specifically for use as a Draglink. The Draglink TRE will travel farther than a Standard TRE.

The Draglink TRE has a slightly larger taper than a Standard TRE, .795" vs .749" so the taper must be deeper for the Draglink.

If so how much for a set of arms with arp studs and hardware?
Thanks.

Hi Steer arms are in stock, studs will be back in stock on friday and yes i can ream the hole/holes deeper to accept that TRE.

Kris

Great, I will be placing an order tomorrow.:smokin:

Great, I will be placing an order tomorrow.:smokin:

Sounds Good we look forward to hearing from you.

10% off all steering arms until the end of July!!!

Lots of stock ready to ship order today to save 10%.

Kris

Sale will be extended for today only.

Lots of Dana 60 Arms and studs in stock and ready to ship.

50% off Stud Kits when purchased at the same time as a Steering Arm, until Friday Aug 5

I missed the sale but my arms came in today and they are :smokin:
Thanks Kyle!

Thanks for the Orders!!! we still have lots in stock and are ready to be shipped.

ttt

25% off stud kits when purchased with D60 steering arms until the end of september, to get the deal you must mention this ad.

Bump for savings!

Only 1 Pair Left In Stock!

Still have the 1 pair left, ready to ship.

Dana 60 Steering arms are heading to the mill this after noon we should start seeing finished arms by the end of the weekend. Give us a call to place a order!

Kris

Steering arms are back in stock give us a call to place an order!!

Kris

So when is the next sale??

So when is the next sale??

How about today only 10% off steering arms.

Kris

How about today only 10% off steering arms.

Kris

Order placed for arm, studs and springless cap. 10% off all of it. Thanks for the kick ass deal!

Order placed for arm, studs and springless cap. 10% off all of it. Thanks for the kick ass deal!

Thanks for the order!

PM Sent with your tracking number.

Kris

Until the end of the Year we are offering 10% off all of our steering compontents!! This includes, Full Hydro Arms, High-Steer Arms, Installation Studs, Crossover & HI-Steer Kits.

Call us to place an order!
250-248-6024
Kris

I need to call this week .... :D

http://www.northwestfab.com/gfx_layout/layout01.jpg

Bump for Saving $$$$

We have lots in stock! They make the Perfect Christmas Gift to yourself :D

I need to call this week .... :D

http://www.northwestfab.com/gfx_layout/layout01.jpg

Thanks for the Order Richard!

Kris

Pm quote on a pair of arms drilled for 3/4 heims and stud kits shipped to 77521 please

Pm quote on a pair of arms drilled for 3/4 heims and stud kits shipped to 77521 please

PM Sent!

Tomorrow is the last day to save 10% on steering arms and kits.

Do you still offer a driver side d60 hi steer arm that uses the OE spring & bushing set up? I'm considering hi steer and would want my arms to match (currently have early NWF crossover kit for Chevy).

Do you still offer a driver side d60 hi steer arm that uses the OE spring & bushing set up? I'm considering hi steer and would want my arms to match (currently have early NWF crossover kit for Chevy).

No we do not, we only make the new style now.

Kris

Well then, that sucks... :(

I need a price to 45840

2 Dana 60 steer arms 2 hole on passenger side 1 hole on driver
Stud kits for steer arms
2 left 2 right heim joints 3/4 bolt 1.25 1/4 wall tubing adapters 2 sets misalignment spacers

I have single rear wheel hubs, will your arm work with nonrecentered h1's


Also need a price for

4 spring perches 2.5" springs
4 spring hangers
4 shackle hangers
All 8 u bolts with nuts. 1978 dodge Dana 60's

Bolt on rear disc adapters

Let me know. Thanks

I need a price to 45840

2 Dana 60 steer arms 2 hole on passenger side 1 hole on driver
Stud kits for steer arms
2 left 2 right heim joints 3/4 bolt 1.25 1/4 wall tubing adapters 2 sets misalignment spacers

I have single rear wheel hubs, will your arm work with nonrecentered h1's


Also need a price for

4 spring perches 2.5" springs
4 spring hangers
4 shackle hangers
All 8 u bolts with nuts. 1978 dodge Dana 60's

Bolt on rear disc adapters

Let me know. Thanks

PM Sent

We have tons of stock on Dana 60 Steering Arms so we are offering 15% off Crossover and HI-Steer Arms until the end of this week!

Studs came in today! all Steering Arm Orders ship same day!

Bump For Saving $$$

will north west fab be at KOH this year?

will north west fab be at KOH this year?

We were planning on going but Unfortunatly plans did not work out so we will not be attending :( Hopefully Next Year!!

Kris

The deal will only be on until end of day tomorrow, call us at 250-248-6024 to place an order make sure you ask for the deal.

Kris

Been a few weeks since the last bump, we have a few steering arms left in stock before the next batch!

Currently running the next batch of Dana 60 Steering Arms, should be ready to ship for Friday!

Got the steering arm installed... really nice piece...

http://i70.photobucket.com/albums/i98/mcmlxix/72K5CST/2012-03-16_05-58-23_770.jpg

Got the steering arm installed... really nice piece...

http://i70.photobucket.com/albums/i98/mcmlxix/72K5CST/2012-03-16_05-58-23_770.jpg

:smokin:

Looking for a price for a pass side steering arm with 3/4" holes and stud kit to 48433. Also, if I go springless on the passenger side, do I need to get the cap for the drivers side? Seems like I should.

Any sales going on that I could get in on?

Looking for a price for a pass side steering arm with 3/4" holes and stud kit to 48433. Also, if I go springless on the passenger side, do I need to get the cap for the drivers side? Seems like I should.

Any sales going on that I could get in on?

PM Sent your way!

What calipers are those brackets for?

Just finishing the latest batch of steering arms, will be ready to ship by the end of the day!

You can place an order over the phone by calling 250-248-6024 or online at www.northwestfab.com

Kris

Pm quote on a pair of arms drilled for 3/4 heims and stud kits shipped to 35661

Pm quote on a pair of arms drilled for 3/4 heims and stud kits shipped to 35661

PM Sent!

Until the end of May we are offering 10% off all Steering Arms and Steering Kits.

You can now order online at www.northwestfab.com

Kris

Bump for saving money!

Thanks for the orders! Still got good stock on all steering arms and don't forget you save 10% until May 31

Can I get a price on the pair of arms, tie rods, and 5 studs and nuts, thanks. Shipped to 02474

Can I get a price on the pair of arms, tie rods, and 5 studs and nuts, thanks. Shipped to 02474

Do you need tie rod ends or the actual tierod?

Kris

Do you need tie rod ends or the actual tierod?

Kris

I meant drilled for tie rods, and it should read 10 studs and nuts