Sorry,I'm not an F-Toy guy,but I have a question for all you guys running propane.Does anybody have any problems with cold starts?It takes 15-20 seconds for the gas to get to the cylinders and fire.After that it will fire up no problem.Is this normal?My buddy has a toyota foklift with a similar setup and it fires right up.Of course it is a smaller motor,and smaller regulator,and mixer.But the gas takes the same path from the solenoid to the mixer as mine.Thanks for any input.It is much appreciated!:smokin:

in the middle of your regulator their is a button with a spring just push it down and let it back up it send a blast of raw fuel threw your mixer see if it will start now if it does you can get a cable or electric solenoid for it

yes, long cold starts are nomral. it helps if you just barely crack the throttle.

Mine does the same on cold startup

Impco makes a cool little gadget that pushes down on that little button and has a "choke" cable to run into the rig so you can pull on cold start. I don't have the part # but Cary at www.gotpropane.com may be able to help.