84' 302 into EB [Archive]

Stallion

10-27-2002, 01:05 PM

Need some help here. I got a 84 302 from a bronco, and am planning on putting it into my 66 EB with stock 3 speed. Having problems with the clutch, flywheel area. The flywheel is from the 84' bronco, the 66-77 clutch does not fit that flywheel. Checked out the idea of putting a 66-77 flywheel on the block, and it had the wrong bolt pattern to attach to the block. Some my question is, will an 84 clutch work with the 66 bellhousing and 3 speed tranny. The 84' throw-out bearing looks different, not sure if it would work with the 66 clutch-fork. Can I use the 66 throw-out bearing with the 84 clutch. Has anyone had an experience similar to this, any advice? What is the solution?
Thanks


Pirate4x4.Com > Brand Specific Tech > Ford > 84' 302 into EB PDA : 84' 302 into EB Stallion 10-27-2002, 01:05 PM Need some help here. I got a 84 302 from a bronco, and am planning on putting it into my 66 EB with stock 3 speed. Having problems with the clutch, flywheel area. The flywheel is from the 84' bronco, the 66-77 clutch does not fit that flywheel. Checked out the idea of putting a 66-77 flywheel on the block, and it had the wrong bolt pattern to attach to the block. Some my question is, will an 84 clutch work with the 66 bellhousing and 3 speed tranny. The 84' throw-out bearing looks different, not sure if it would work with the 66 clutch-fork. Can I use the 66 throw-out bearing with the 84 clutch. Has anyone had an experience similar to this, any advice? What is the solution? Thanks synds9 10-27-2002, 05:13 PM hey ask at http://www.classicbroncos.com more answers there for the more bronco specific stuff :D Stallion 10-28-2002, 09:02 AM Thanks, good idea, I will do that. But I usually get some pretty good advise from this site.