Anyone here seen these new motor mounts for the 3.0?

http://ruggedrocksoffroad.com/rugged-rocks-hd-motor-mount-nissan-pathfinder-30-v6-1987-1995-p-35921.html?osCsid=cttjv3tobckhoq1l132goasvq7

Here's a quick pic.
http://ruggedrocksoffroad.com/images/RR-D21-V6MM%20_sm.jpg

Looks beefy, but for $84 you could pretty easily make one of those.

All I did on my truck was weld a piece of chain from one side of the stock mount to the other with a bit of slack, so if the motor torques over too far the chain keeps it from twisting anymore.

The chain is the $1 fix, better than nothing but making some mounts like the ones you posted would be a pretty good idea.