I have an uncut '69 Bronco and I need some cut-out flares for it. I was looking at the Guerilla Warlfares. I would like to get the largest opening I can because I intend to run 35x12.50 with 3.5" lift if possible. What flares give the most tire clearance and are the most durable?

go with the warflares. my dad has a pair on his bronc and he's crunched them on everything and there the tuffest damn things i've seen for broncos. just my .02

I have a set of warflares on my EB. They have the largest opening and they are tough as hell.

I'll third the Gorilla Warflares.

I'll fourth the Gorilla Warflares.

Wow now I am having a really hard time deciding. :D

Thanks guys.

5th the warflares.. Thats what I got.

i have a set of them on mine. i put them up to the body line and streched the flares in the back from the very corner to the door post and the front from the grill to the other door post. i have no lift and was able to fit 35s under it with a little rubbing...i dont have an aux tank and i had to move the cap and filler neck. i put in inside on the back of the drivers side wheel well.

When i laid it on its side, the Gorrila flars were the only part of the truck that did not get messed up

Are those gorilla warflares pretty flexable? Like as in, would I be able to mold them around something else besides an EB?

they twist up pretty good but the mounting surface on them is not to flexible. since mine were up at the line the lower fender line bend in the flare is about 4 inches higher on the truck. i tried to heat it up and srew it down pretty tight but it still sticks up and kinks out a bit. looks like i bent it and creased it. but you dont notice it too bad. so if you mount it to any other rig hopefully it is a flat surface.