|
BRB 11-03-2002, 05:53 PM can anyone give me the dimensions for the RE superflex joint. The ID, OD, & Width measurements would be extememly helpful. Any idea on the misalignment angle, or radial load would also be cool. thanx in advance reddwarf 11-03-2002, 07:32 PM Ummm, I think the radial load is 5 :flipoff2: Old Scout 11-03-2002, 07:38 PM Width is 2 1/2, OD is 2 5/8. why ID? 17-18 degrees of movement. 9/16 bolt. Buy them from RE , It's much cheaper going direct than buying them from some of the guys that resell them. Here is the mount I made for mine: http://pics.montypics.com/Old_Scout/2002-11-02/insert3.jpg BRB 11-03-2002, 08:09 PM thanx alot, ..and your right, I dont need the ID. Yotaonly 11-03-2002, 08:34 PM Originally posted by Old Scout Width is 2 1/2, OD is 2 5/8. why ID? 17-18 degrees of movement. 9/16 bolt. Buy them from RE , It's much cheaper going direct than buying them from some of the guys that resell them. Only like 18 degrees of movement. The ones AOR sells allow 38 degrees of movement. That seems like quite a difference. Unless you just talking about movement to one side. Do ya have a pic of a RE JJ at full pivot. I'd be very interested in a comparison the the AOR ones, thanks. Old Scout 11-03-2002, 08:43 PM Originally posted by jesselt about movement to one side. . Bing bing we have a winner:p Bigburlynakedguy 11-03-2002, 09:01 PM AOR? Old Scout 11-03-2002, 09:52 PM Originally posted by Daniel I just bought 8 of those.. do they adjust with a threaded end? OLd Scout help me out here... Are those the BEST on the market in the picture? DO they go 17/18 degrees? Where are the 38* ones and how much? The Threaded end only adjusts the preload. The RE ones are just a flexy as anybody else's. I measured the angle on one side not both. 18+18 = 36, perhaps with the weight of the truck it will flex the extra 1 degree for me and then it will be 38! Imo REs are the best . toyzilla 11-03-2002, 10:34 PM RE has just reduced the price to $35. Here is the thread on it: http://www.pirate4x4.com/forum/showthread.php?s=&threadid=92565 PIG 11-03-2002, 10:43 PM Originally posted by BRBx4 can anyone give me the dimensions for the RE superflex joint. The ID, OD, & Width measurements would be extememly helpful. Any idea on the misalignment angle, or radial load would also be cool. thanx in advance The width of the ball is 2.5 inches. The width of the outer race is 1 7/8" and the outer diameter is 2 5/8". Old scout is on the money with the deflection of 36 degrees. I have some instock ready to rock. CLICK HERE (http://www.polyperformance.com/re_bearings.htm) PIG 11-03-2002, 10:44 PM One more Old Scout 11-03-2002, 10:45 PM Originally posted by PIG . I have some instock ready to rock.] But your still at the old price???? PIG 11-03-2002, 10:50 PM Originally posted by Old Scout But your still at the old price???? OK I just saw that post. I am changing it right now. Daniel give me a call when you get a chance. PIG 11-04-2002, 12:19 AM Originally posted by Old Scout But your still at the old price???? FIXED, just updated the coil spring page as well. PIG 11-04-2002, 01:07 AM Originally posted by Daniel Hey David... Call Me :D Ill Be in the office all day:) Got it. Must sleep now. | |