IN STOCK!! :smokin:

We have our first run of TJ and YJ back half kits available and ready to ship. Our kit comes ready to weld and is keyed for easy installation. Our back half kits allows the most room available between the frame rail and your axle tube making for an easier application in low stance setups.

Moving the frame rails under the tub allows the space needed to clear your shocks, coil overs, air shocks or struts. We've included a rear bumper with beefy clevis ends for tow points.

We are offering this first run at an introductory price of $389 plus shipping. If you would like to place an order you can contact me at 316.337.5311. If you have questions you can also email me at andy@trailworthyfab.com.

You can order direct from the site here:

http://www.trailworthyfab.com/TJ-YJ-Back-Half-Kit.html

We look forward to earning your business. :grinpimp:

Here are some install pics from my jeep.

TTT for the day crew!

Thanks for all the calls!!

Still have a few left. Get in on this first run before the price goes up. We are offering free shipping on this rear frame kit through Monday 11/29. :smokin:

Free shipping ends tomorrow. PM me for the coupon code to get your free shipping.

Thanks Andy, can't wait to get it!

damn I want this so bad. !

damn I want this so bad. !

Today you can save ~$65 bucks in shipping charges with our free shipping offer. Call me for details. 316.337.5311 :smokin:

I would be calling you right now. But i just order roghtly ~500 bux in gears and lockers for another project and bought a new 42" tv on black friday lol ol lady said "Hell No" to this one..... for now



hmmmmmmmm. wonder if i could take the tv back???

I would be calling you right now. But i just order roghtly ~500 bux in gears and lockers for another project and bought a new 42" tv on black friday lol ol lady said "Hell No" to this one..... for now



hmmmmmmmm. wonder if i could take the tv back???

You are doing me a favor. I had no clue he was going to be doing free shipping on these huge fawkers. It has me in the red:flipoff2:

Thanks for thinking about us!

Todd

any chance of extending this deal???

PM sent!

Dumb questions: what about rear body mounts? Looks like you have to cut the body under the tailgate, what if I have a one inch body lift? Any type of guide where to cut the stock frame? What's your favorite ice cream flavor?

Dumb questions: what about rear body mounts? Looks like you have to cut the body under the tailgate, what if I have a one inch body lift? Any type of guide where to cut the stock frame? What's your favorite ice cream flavor?

You cut the bottom of the tub to locate the frame as high as possible. If you are running a body lift you will still need to trim the bottom channel but you can retain the body mounts however you prefer.

The stock frame needs to be cut back where the bend starts. It has been my experience that most bends are just a little bit different but our setup works well for all of them.

I like rocky road ice cream. Something about chocolate and marshmallow together really tickles my pink.

Any other questions please let me know. :smokin:

Top:)

Andy,
PM sent again,
Haz-Mat

Does all this come as flat stock in terms of shipping?

I think this would work well for my 116" full body rear steer TJ.
HM1

They aren't flat as they are precision bent :D

This setup requires weldage! :cool:

I like Weldage.:smokin:

HM

Nice talking to you this evening. Looking forward to the kit. :smokin:

Andy, Sent you a email a few days back. Awaiting your response. :)

Bump for ya

I didn't know how well these would go over on here? They have been a big hit. Thanks for the orders guys :)

We originally intended these back half kits to allow room for coilovers, shocks, and suspension stuff. I believe we have found out that YJ guys are using these to replace rotten frames which is a great idea!!

Don't forget these are great for a TJ or YJ!!

http://i178.photobucket.com/albums/w271/hallgeirgustavsen/bump.jpg

All PM's returned...

PM's returned!

TTT. We have plenty of these on the shelf. I have received nothing but great responses from those that have used these! :smokin:

Topsauce!!

To the top!

btt

Back up top. These are sitting on the shelf and ready to go.

Only 2 left :eek:

We will have to get some more of these out in front of you guys. Thanks for the orders. Very :smokin: product.

For those who have bought them. Post up pics please.

All of the reviews of these back half kits have been awesome. Thank you guys for the return feedback.

Ttt

bumpsauce!

PM's returned!

Get your back half's here!

Bump

Can you PM me a price shipped to 02777 for a YJ kit. :smokin:

Can you PM me a price shipped to 02777 for a YJ kit. :smokin:

PM on the way.

Can you pm me a price shipped to 01440

Can you pm me a price shipped to 01440

PM on the way.

how much shipped to 73701?

how much shipped to 73701?

PM inc!

Need a price for a YJ kit shipped to 36453

Need a price for a YJ kit shipped to 36453

PM inc!

How much for a TJ kit shipped to 95776?

How much for a TJ kit shipped to 95776?

PM inc!

Can't wait to get mine Andy! The TJ is going to be sick with the low stance and 42s!

Can't wait to get mine Andy! The TJ is going to be sick with the low stance and 42s!

Be sure to send pictures!

TJ kit shipped to 66071

TJ kit shipped to 66071

PM on the way.

Thanksgiving bump!

What is the clear width between the rear frame rails once this kit is installed? It looks a little narrower than just the width of the tub and I'm curious if I can get my fancy aluminum tank to fit.

What is the clear width between the rear frame rails once this kit is installed? It looks a little narrower than just the width of the tub and I'm curious if I can get my fancy aluminum tank to fit.

31.5".

I plan to sink the RCI 2161a tank in between them. It will fit just right.

What tank do you plan to run?? Let me know if you need any more measurements. :)

Best kit out there, love mine!!!!!!!!!!!!!!!!!!
thanks guys kick ass product

best kit out there, love mine!!!!!!!!!!!!!!!!!!
Thanks guys kick ass product

x2



Just need a front frame kit and some kick ass armor to match now :stirthepot:

31.5".

I plan to sink the RCI 2161a tank in between them. It will fit just right.

What tank do you plan to run?? Let me know if you need any more measurements. :)

I love that's what she said setups...

I have a Gen-wrong crawler tank. I'm not a huge fan of the company (loved Robert but no so much the attitude from the rest) so I wouldn't have bought it from them but I got it NIB for $350 from a local so...

I love that's what she said setups...

I have a Gen-wrong crawler tank. I'm not a huge fan of the company (loved Robert but no so much the attitude from the rest) so I wouldn't have bought it from them but I got it NIB for $350 from a local so...


I don't think there are any backhalf kits that don't relocate the frame rails under the tub. Therefore I don't think a gen right tank will fit with any of them. I would advise you just sell it off and have one made to fit how you want or just run a rci or such and sink it down some like Dookey said.

btt

Andy,

Does cutting the tub "crossmember" out from underneath the tailgate make the tub very flimsy in the back?

For the body mounts that mount in the rear crossmember: as the factory setup has these wider than the ~36" width of this kit it looks like you have cutouts in place on the replacement crossmember- do these bolt through the tub? Can you show a picture of this?

Monday bump

Andy,

Does cutting the tub "crossmember" out from underneath the tailgate make the tub very flimsy in the back?

For the body mounts that mount in the rear crossmember: as the factory setup has these wider than the ~36" width of this kit it looks like you have cutouts in place on the replacement crossmember- do these bolt through the tub? Can you show a picture of this?

Do I get this question answered? :)

Andy,

Does cutting the tub "crossmember" out from underneath the tailgate make the tub very flimsy in the back?

For the body mounts that mount in the rear crossmember: as the factory setup has these wider than the ~36" width of this kit it looks like you have cutouts in place on the replacement crossmember- do these bolt through the tub? Can you show a picture of this?

Do I get this question answered? :)

Missed it the first time. I apologize about the delayed response.

If you leave the tub cross member out of the game then yes, it will be flimsy. If you reinforce things then you shouldn't have much of a problem. I plan to tie the corners back into the frame in some form or fashion. I cut the whole cross member out of there when I really should have only cut the section out for the frame.

I don't think you can go over board when it comes to holding the tub to the frame. So it is a very good idea to add some structure back there. I added some brackets on the inside of the frame to catch the tub cross member under the seat. Now I just need to tie the furthest rear section of the tub back into the frame.

to the top!

bump

bump

back to the top

bump for a kick ass kit thanks dookey
couple pics of mine installed for ya
in the proccess
http://i46.photobucket.com/albums/f130/johnny_66/stage%203/DSCN4099.jpg
http://i46.photobucket.com/albums/f130/johnny_66/stage%203/DSC04384.jpg
http://i46.photobucket.com/albums/f130/johnny_66/stage%203/DSC04379.jpg
all finished up
http://i46.photobucket.com/albums/f130/johnny_66/stage%203/DSC04553.jpg
http://i46.photobucket.com/albums/f130/johnny_66/stage%203/DSC04549.jpg

Looks great! Thanks for the pictures!