PDA

: Heat Treated Trailing Arms..

86Yota4.70
11-23-2010, 09:35 AM
Here at Heretic Fab we have had a huge increase in inquiries about heat treated trailing arms.. In the past I have done a few sets on the side for friends and such but I think it is time to offer it to everyone!

These are 100% heat treated 4130... From the plate to the filler rod is all 4130!:smokin:... They come ready to run with a bushing/sleeve at one end and either 1.25" or 7/8" insert for a heim at the opposing end...

Length is up to you, with the way these are built I can go anywhere from 36"-48"....

Made to fit a 2" Coilover and 2.5" bypass but can be modified to fit bigger shocks..

$999!!

Lead time at the moment is 3-4 weeks so get those orders in!!

http://i69.photobucket.com/albums/i57/tay1359/Picture003.jpg

http://i69.photobucket.com/albums/i57/tay1359/Picture006.jpg
86Yota4.70
11-25-2010, 10:24 AM
This is the first step in making your rig go-fast!
86Yota4.70
12-01-2010, 08:45 AM
Top...
heattreater
12-01-2010, 09:39 AM
What's the RC your treating these to?
86Yota4.70
12-01-2010, 10:35 AM
What's the RC your treating these to?

~42Rc
86Yota4.70
12-04-2010, 08:27 AM
Top..
86Yota4.70
12-12-2010, 09:36 AM
Top..
86Yota4.70
12-16-2010, 06:45 PM
Top..
86Yota4.70
12-24-2010, 08:25 AM
Top...
86Yota4.70
01-05-2011, 05:25 PM
Top...
86Yota4.70
01-23-2011, 10:33 AM
Two rigs in KOH running my trailing arms!
raulv240
06-07-2011, 12:42 PM
I heard you offer this in a "you weld it yourself" kit? If so can i get a price to 89048. Also, what do you use at the chassis end to keep the link from rotating?
86Yota4.70
07-05-2011, 08:10 AM
I heard you offer this in a "you weld it yourself" kit? If so can i get a price to 89048. Also, what do you use at the chassis end to keep the link from rotating?

P.M. sent..
86Yota4.70
08-15-2011, 05:31 PM
Still offering these!
86Yota4.70
08-26-2011, 07:17 AM
Bump.. I have started building a 48" set to have on the shelf!:smokin: