560671
www.longevity-inc.ca

We are proud to introduce Eric Brinker, part of Brink Fab in Canada as our authorized dealer and distributor of LONGEVITY Welding Equipment in Canada. He is based out of Alberta and is a pirate member, who loves rock crawling and is known by some of you!

Here is his contact information:

Brink Builders
85 Fieldstone Way
Sylvan Lake, Alberta, T4S0C3
Phone: 403-304-0024


With that said, we have also launched, www.longevity-inc.ca, which is dedicated to our friends up north! The site will have an integrated with our welding forum which features 2500+ members at www.freeweldingforum.com

Eric will be on here as longevity-inc.ca user id.

Check out the site. We are still developing some aspects of it, but the products are now in stock in Canada. Also, we are hoping to have some sort of giveaway here for our Canadian customers.

Stay Tuned!

LONGEVITY to the TOP!

I like your helmet prices, but third-party reviews and opinions are pretty rare for some reason.

I get that Longevity is trying to make a name for itself, but your site says that the company has been around for "over five years"... how come nobody's talking about your helmets? With all due respect, I'd expect a decent Elite-series helmet for $150 to be sparking at least a bit of buzz.

So, can you point me to an independent review of your Pro or Elite series hats? Also, how many sensors do they have? I can't seem to find that information on your site.

I'm in the market to buy in the next couple weeks, so it's nice to see a Canadian distributor in my area.

Thanks.

I like your helmet prices, but third-party reviews and opinions are pretty rare for some reason.

I get that Longevity is trying to make a name for itself, but your site says that the company has been around for "over five years"... how come nobody's talking about your helmets? With all due respect, I'd expect a decent Elite-series helmet for $150 to be sparking at least a bit of buzz.

So, can you point me to an independent review of your Pro or Elite series hats? Also, how many sensors do they have? I can't seem to find that information on your site.

I'm in the market to buy in the next couple weeks, so it's nice to see a Canadian distributor in my area.

Thanks.

Stainless,

Your concerns are very valid. Tomorrow, I will be able to provide you with at least 3 customers that use our helmets professionally to build all sorts of serious things.

Please check your PM.

Thanks

Simon
LONGEVITY USA

WEBSITE LAUCH/CHRISTMAS SPECIAL ON LONGEVITY

For the month of December Longevity Canada is offering no GST and free shipping on all units.

Most are in stock with me right now so you can have them fast
Plasma cutters start at $524.99 Can $$$

See www.longevity-inc.ca for the model line up. Then let me know what you need. 8)

I picked up a 250 from Brink a few weeks ago, great unit and a great vendor. Anyone who buys from him won't be dissapointed.

I picked up a 250 from Brink a few weeks ago, great unit and a great vendor. Anyone who buys from him won't be dissapointed.

Glad to hear Eric took good care of you! He is a very nice guy and we are happy to have him be part of the LONGEVITY team!

Check out www.longevity-inc.ca for future parts and sales. We will be putting more time into the Canada market starting January so you guys should see great results!

Brink you still honor the free shipping to BC?

might be interested in a plasma

I'm homeboy on crawlinbc

Brink you still honor the free shipping to BC?

might be interested in a plasma

I'm homeboy on crawlinbc



You bet. Free shipping to BC is not a problem. Give me a shout/let me know what you need and we'll get you fixed up.

Eric your the man, Thanks for everything.:):):):)

Best,

Eric your the man, Thanks for everything.:):):):)

Best,

Put my order through with eric look forward to trying out my new mig and plasma!

Same deal on the welding helmets? No taxes or shipping (BC)? Payment methods?

Looking at the elite carbon series. Simon, could you also share those reviews with the rest of us?

Thanks,

Evan

Same deal on the welding helmets? No taxes or shipping (BC)? Payment methods?

Looking at the elite carbon series. Simon, could you also share those reviews with the rest of us?

Thanks,

Evan



Not a problem. Give me a shout.

Dear BigBlackToy,

When you get your plasma/mig unit please be sure to share some pics of your projects, Thanks.

Best,

Units in stock up here still. Even some that are sold out down south. Let us know what you need guys.

Brink always has them in stock for you, Keep up the good work.

Best,

Check out our new website for the customers in Canada to make shipping easier for you.

Thank you

DP

Hi I was wondering if your free shipping included St.Johns Newfoundland. The other question was are the consumables readily available or do I have to have them shipped every time. Derek

Hello rockrunr,

We have the consumables in stock here if ordered from us but our Canada dealer also has free shipping along with consumables on hand.

Best,

DP

Hi I was wondering if your free shipping included St.Johns Newfoundland. The other question was are the consumables readily available or do I have to have them shipped every time. Derek

Give me a shout Rockrunr. I can get you fixed up.

Eric Brinker
Brink Fab
403-304-0024

Dear Brink,

Thanx for helping out brink, Hope all is well.

Best,

DP

Hey Brinker,

New shipment coming in the first/second week of February.

Best,

D. Pumphrey

Fresh stock now in North of the border ready to ship out.

Give me a shout with anything you need.

Hey Brink,

That's good to hear, Keep up the good work.

Best,

LONGEVITY

Our Pirate 4x4 March Specials are almost over, Be sure to view.

Best,

DP

Hey Eric, looking to get a 50i plasma cutter. I'm about an hour away from Sylvan so I don't have shipping issues but was wondering if we could work a deal on some consumables?

just wanna say thanks again to Brink ( Eric ) for the welder and plasma he shipped to me I've used the plasma and really liked it so far, can't wait to try out my new mig machine.


bigblacktoy

Hey Eric, looking to get a 50i plasma cutter. I'm about an hour away from Sylvan so I don't have shipping issues but was wondering if we could work a deal on some consumables?

No problem. Give me a call.

Eric

E. Brinker is very helpful so if you need anything in Canada he is the man to call.

Thanks alot Brink

So lets run a special. Seeing as it's tax season lets involve some.....



Double the GST off your purchase of any plasma cutter, welder or multifunction machine. So that's 10% savings right off the top



Plus you can still stock up on consumables at 25% off at that time.




Big savings available to anyone looking to work with some metal....







Lots of units in stock

did you get a chance to price the tig 200dx?

having internet issues here so your site will not load :(

He will get right back to you.

did you get a chance to price the tig 200dx?

having internet issues here so your site will not load :(

Pm'd you just now Micheal.

Thanks for the reminder.

Hey Eric, I picked up the 50i from you the other day. Started out very frustrated as I couldn't get the machine to power up. I have three welder outlets but only two are fully setup and couldn't get neither to work. Was very close to unplugging the compressor and trying it there but discovered the outlets were labelled wrong at the panel... she fired up after that LOL. Then I started making some test cuts on some 1/4" plate. Couldn't for the life of me get it to cut through. Went fast, slow, increased air pressure, increased amperage, still wouldn't cut through. Then I decided to move the ground directly to the plate rather than the bench. Well holy crap what a difference and a lesson learned about grounding with the plasma. She cut that 1/4" plate like butter, you couldn't get the grin off my face :)
Thanks again Eric for a great machine and a great price on it and the consumables.

Hey Eric, I picked up the 50i from you the other day. Started out very frustrated as I couldn't get the machine to power up. I have three welder outlets but only two are fully setup and couldn't get neither to work. Was very close to unplugging the compressor and trying it there but discovered the outlets were labelled wrong at the panel... she fired up after that LOL. Then I started making some test cuts on some 1/4" plate. Couldn't for the life of me get it to cut through. Went fast, slow, increased air pressure, increased amperage, still wouldn't cut through. Then I decided to move the ground directly to the plate rather than the bench. Well holy crap what a difference and a lesson learned about grounding with the plasma. She cut that 1/4" plate like butter, you couldn't get the grin off my face :)
Thanks again Eric for a great machine and a great price on it and the consumables.


Cool.

Really happy to hear you've got it rocking. Enjoy the machine. Don't hesitate to call if you need anything.

Hello pirate 4x4 members, we are still honoring specials here in our other thread for the 4th of July, thank you all for viewing and we look forward to speaking with you soon.

Best,

DP