S A L E P E N D I N G 12-14-10



This is the first bobber we have done in almost a year that wasnt built for as a customer's order--

37K miles
Whistler turbo
new tan paint
new soft top
99% tread Goodyear 49" tires

$9500 OBO!

Not titled-- comes with bill of sale and SF97 Gov form to obtain title

Call me if interested in purchasing- 760 248 6214

Thx for looking!:)

(crappy phone pics for now)

pics-

This is the first bobber we have done in almost a year that wasnt built for as a customer's order--


Call me if interested in purchasing- 760 248 6214

Thx for looking!:)

Couple questions when you have time.

1. How much do the other wheels add, like on the black one? (Re-drilled hemtt wheels I believe)

2. How much for a 1.5 ton trailer with Re-drilled hemtt wheels / tires? ( I understand you will probably have to raise the trailer bed.)

3. How much for 2 spares and the Re-drilled hemtt wheels?



http://www.pirate4x4.com/forum/attachment.php?attachmentid=540381&stc=1&d=1281124166

Couple questions when you have time.

1. How much do the other wheels add, like on the black one? (Re-drilled hemtt wheels I believe)

2. How much for a 1.5 ton trailer with Re-drilled hemtt wheels / tires? ( I understand you will probably have to raise the trailer bed.)

3. How much for 2 spares and the Re-drilled hemtt wheels?



http://www.pirate4x4.com/forum/attachment.php?attachmentid=540381&stc=1&d=1281124166


Those are our '100dollarman' wheels--- recentered HEMTT wheels to 6 lug $350 each.

The tires are $300 each.

Trailers are $500-1000

THX!

can you paint my M1008 for me :)

Those are our '100dollarman' wheels--- recentered HEMTT wheels to 6 lug $350 each.

The tires are $300 each.

Trailers are $500-1000

THX!

TY sir!

The wife has been wanting to go to the casino for the longest, so I took her yesterday in exchange for her go ahead on working to get a duece.

I made $650 at the casino that goes towards the duece fund.:D

S A L E P E N D I N G --------------------

Took a deposit on this one today--customer is going with 100dollarman wheels and a 46" tire--





will be building another one starting next week-- get your orders in! :grinpimp:

Do you ship any of the tires?

Do you ship any of the tires?

yes

what would shipping be for a bobbed deuce to 98942

Prolly around $2000 to haul it. Or you can drive it!

Prolly around $2000 to haul it. Or you can drive it!
Slightly off topic, but probably next month I am planning on (finally) buying an M1028 from you. What kind of condition are these in on sale? Would it be safe/reliable to drive home in? I live in 29 Palms, not all that far. I plan on using the truck for a DD/towrig for my XJ. The plan is to not have to put too much money into making it drivable once I get it.

Also, how doable are some HMMWV tires mounted on HMMWV wheels? I don't want to lift it if possible and am not averse to cutting. Would stock HMMWV wheels have the right backspacing to run the tires? Do you know what CA usually charges in registration? Is it ridiculous like the late model trucks?

We got 2 bobbers ready to go yesterday---

These are both sold, but we are taking orders!

Posted on one of your other threads but looking around brought me to this one. what is the price for the green one in the pics just above(I know that one is sold) and what does it have as far as options go? What size tires are those? That is pretty much how I would want mine to turn out, with the hard top too. Wayyyyyy too cold up here for a soft top.

Posted on one of your other threads but looking around brought me to this one. what is the price for the green one in the pics just above(I know that one is sold) and what does it have as far as options go? What size tires are those? That is pretty much how I would want mine to turn out, with the hard top too. Wayyyyyy too cold up here for a soft top.

That one was approx $10.5k

Apparently they cannot be sold to Canada, according to my searching today so it looks like I'm out of luck. Guess I'll have to search for one up here and mod it myself. That sucks as I'd rather pay someone who has done it lots of times than to start from scratch. If any of you other Canadian guys figure a way to get one here, let me know.

Apparently they cannot be sold to Canada, according to my searching today so it looks like I'm out of luck. Guess I'll have to search for one up here and mod it myself. That sucks as I'd rather pay someone who has done it lots of times than to start from scratch. If any of you other Canadian guys figure a way to get one here, let me know.


Give me a call for info-- 760 248 6214

would the EUC cover one of these bobbed dueces for export to scotland or ireland or england
?

have you ever done a dump bed if so how much more?

thanks brad

Apparently they cannot be sold to Canada, according to my searching today so it looks like I'm out of luck. Guess I'll have to search for one up here and mod it myself. That sucks as I'd rather pay someone who has done it lots of times than to start from scratch. If any of you other Canadian guys figure a way to get one here, let me know.

That's news to me.:D

I didn't have any trouble at all when I crossed the border last June.:flipoff2:

http://i198.photobucket.com/albums/aa268/rgdl99/DSC02935.jpg

would the EUC cover one of these bobbed dueces for export to scotland or ireland or england
?


I dont know about this--



have you ever done a dump bed if so how much more?

thanks brad

I havent done it, but a couple of my customers have had it done-- approx $4000 from what I hear...

Ok really dumb question here but these trucks have issues going over 65 mph not that you would need to drive this tank that fast but do you think this truck will tow a crawler trailer/ rv setup. I think that it would be the coolest tow vehicle ever!

I've been saving up for a decent 12 valve with low miles but your bobbed dueces are distracting me! What's the wheelbase on them? What's the turning radius if you happen to know? Lacking a actual diameter, what 1 ton 4x4 do they turn like? Short or longbed extracab or crewcab? Just a guess would be fine. Thanks and I look forward to a road trip down there soon.

How much for one exactly like in post 20?

How much for one exactly like in post 20?

$8500

in stock

the beautiful 68 deuce I drove when GI-Joe would hit aroud 50 to 55mph on flat ground in 5th gear and that was "foot on the floor". I assume the newer model 5tons have more power. Of course back then the optional heater was a great thing to have, and power steering would have been the $---.

How do you convert the rear tires/wheels from two on each axel to one super single (1400x20) using the stock wheels?

On the front, is it just a straight tire swap on the rims?

How do you convert the rear tires/wheels from two on each axel to one super single (1400x20) using the stock wheels?

On the front, is it just a straight tire swap on the rims?

Front is just tires-

Rear is wheel dish out, or- you can flip the hubs and run dish in like the front.

Front is just tires-

Rear is wheel dish out, or- you can flip the hubs and run dish in like the front.

Which way do you prefer doing the rear wheels? Will 46's fit just fine?

What are you asking for 46's these days?

How practical would one of these be for a tow rig?? Do they come with heaters? I would love to pick one up.

Apparently they cannot be sold to Canada, according to my searching today so it looks like I'm out of luck. Guess I'll have to search for one up here and mod it myself. That sucks as I'd rather pay someone who has done it lots of times than to start from scratch. If any of you other Canadian guys figure a way to get one here, let me know.
It anbe done. You must remove all data plates and any id that states it was made in the USA or related to the USA,Paint it non military color.No green , brown or black, Try blue,red or orange. Then have you local dmv do a inspection and retitle it as a Jeep truck. Then sell it.

How practical would one of these be for a tow rig?? Do they come with heaters? I would love to pick one up.
From being a owner of a Deuce, I would say not practical.One thing is that it is very difficult to put non historic plates on the trucks. Insurance is terribly expensive to have it as a daily driver or tow rig. Plus trust me people don't carehow big yo are on the public road , they will still drive like idiots around you. Some come with personal heaters, you can buy them if not. The engine puts out so much heat that you can use a dryer vent hose for a vent.

Why do you not have titles. It cost a extra 125.00 through GL to get one? GLWTS.

I still want one, Would make a great camping rig :D

Why do you not have titles. It cost a extra 125.00 through GL to get one? GLWTS.

I have never known anyone to get a title through GL.

Info???

dryer vent hose......you are talking engine compartment heat, right ? ever hear of carbonmonoxide poisoning ??Exhaust leak possibilty?:eek: Just food for thought...........:skull::ghost::zzz:

I've had my eye on a bobbed duece for a couple of years now and now that I finally have the money I get transfered to new hampshire!! Would it be practical to ship it all the way up there or maybe take a week of leave and drive it...or maybe you know of a shop up there that could do it? Thanks

if your buying deuces and selling them to Canada after you buy one form GL your breaking the law. you agree to not sell one to some one out side of the US when you buy one.

if your buying deuces and selling them to Canada after you buy one form GL your breaking the law. you agree to not sell one to some one out side of the US when you buy one.

Use spellcheck when you post:flipoff2:

No laws were broken when I bought my M818.:D

There are brokers out there who have exporters licenses and are legally allowed to export EX-military trucks. They routinely sell these units to Canada, Britain, France, Germany, etc. It costs a little extra but IMHO it's worth it. That non-export law came about after 9/11 because the US government didn't want ex-military equipment being used by Al-Qaida types and other terrorists. They really don't have a huge issue if a Canadian buys a truck as long as there's no guns, cannons or missile launchers still attached.:D


edit for clarification: I have talked to Hundy a few times and he's an awesome guy. He sells nice trucks for a decent price and he's definitely the "go to" guy if you want a Deuce or 5-ton that's already bobbed and ready to roll. I'm in no way trying to sway potential buyers away from him, but he does not have the license to export these trucks. I get PMs all the time from other Canadians wanting to buy a truck from Hundy. I would suggest that if anyone is serious about buying one they should do some research and try to find a broker who can do the paperwork to make it happen.

Bobbers available-- $9250 each-

in stock-

:flipoff2::flipoff2:Lowballer.net

I got 1000.00 cash baby( and a cold one)

bump for you, missed you in Havasu. We need to hook up again. I am hitting Moab in may,( so trying to get the rig all tuned up) should have a Rhino for the wife and kids in the next week or two, so we need a JV trip

What is the payload capacity of the bobbed duece?