:D

Ryan - man - you got issues - maybe sign up for some anger management classes:D

More pics of the rear of your tub.....

WTF I CANT POST MORE THAN E FEW WORDS

Ryan,
Are you moving the fender wells up? I moved mine up this spring. You can trim real high past the side marker light were you normally have to stop.

try this again..........

WELL I SOLD MY CAGE AND NEED SOMETHING TO SAVE MY NOGEN. I ALSO NEED TO CLEAR THE 42S. IM NOT SURE HOW FAR IM GANNA GO......IM THINKING OF HACKING THE REAR SHEETMETAL,LEAVING THE FRAME, AND ADDING SOME TUBE. KINDA LIKE SPACE GHOST DID. THE ROCKERS ARE GANNA BE ANGLES UP A FEW INCHES UNDER THE KICK VENTS, ALSO GANNA DITCH THE 1" BODY LIFT MAYBE LOWER THE BODY 1" MORE.WE'LL SEE..........ILL KNOW IN THE MORN WHEN I START HACKIN:D

WELL IT WORKED .........

ILL GET MORE PICS OF THE REAR WHEN ITS LIGHT.....

it'll be cruising by the gay bars again in no time...:flipoff2:

'69 fj40- 350, 700r4, sUa PS, discs, 33!'s
'65 fj45-sm420/3 speed tcase, soa, 36's, dana 44 front, high steer, scout steering


WHICH ONE RUNS AGAIN????:flipoff2:

that was below the belt man...soon, very soon:cool: check your email or pm's..

:rainbow:

How bout a pic of the Camaro? :)

Ryan, you really need to
change the name.............I find myself very afraid to look at a thread titled.......
"project bunghole"
:flipoff2: :flipoff2:
Butch

HERES A SHOT OF THE CAMARO FOR YA

GOT A LATE START AND THE PICTURE CAME OUT CRAPPY TOO:(

OH WELL STARTED HACKING THO:D

so tell us about the new sig?

what happened?

Originally posted by BJ On Roids
so tell us about the new sig?

what happened?

NOTHING HAPPENED.......JUST QUOTING THE GROUCH

UNDERGROUND HIP HOP.....

cool cool, why in the first pics is there some body then you ditched it all?

plans getting bigger?

THAT WAS KINDA MY PLAN IN THE BEGINING BUT I WAS JUST SCARED TO START HACKING MY DAILY DRIVER......

IT WILL STILL BE MY DAILY DRIVER THO:D

COOL

so will you street it on the 42s?

YUP............GANNA BREAK THEM IN THEN GET THEM BALANCED..............

THEY WHERE REALLY BAD THE FIRST FEW DAYS BUT AFTER A WEEK THEY BARLY HAVE TO BE BALANCED........WE'LL SEE HOW THEY BALANCE THO..:confused:

PROGRESS IS SLOW...HAD TO WAIT FOR MORE TUBING.
IT WAS SUPPOSED TO COME ON FRI BUT THOSE FAWKERS COMPUTERS WENT DOWN. FINALLY GOT IT AND AM READY TO BEND AGAIN:D

:D

Daym, I hope you don't plan on using ALL that tubing for the cage:eek:

:D :D :flipoff2:

all i can say is, about time:flipoff2: i thought you'd be done before me, guess not,,i'll be coming over w/ the fj45 to trade you my 36's for the 42's this week ok?

Originally posted by Mustard Dog
Daym, I hope you don't plan on using ALL that tubing for the cage:eek:

:D :D :flipoff2:

have you seen his cages? :eek:

Hey Mr Caps lock, whats the going rate per foot on tubing there? I am ordering from Houston just to get it and am paying approx $2.10/ft depending on how much I buy.:eek:

LOOKS COOL BUNG... HOW LONG TILL THE :rainbow: FLAG GOES ON THE BACK AND LONGS SPONSERSHIP STICKERS GO ON THE SIDE?:flipoff2:

NICE CORNHOLE!

CHOKE U- YEH MAN! YOU GONNA WATCH UFC 40 ON THE 22ND? WATCH TITO ORTIZ MAKE SHAMROCK CRY? :)

MATT :mad2:

RUSTYB.............1.16 A FOOT

CHOKEU........:flipoff2:

RYAN- ARE YOU USING CREW TUBING OR DOM? 2" .120 DOM RUNS TO THE TUNE OF $93 A STICK OUT HERE [OR SO MY BOSS SAYS] AND THAT WOULD BE ONE HELL OF A PRICEY ORDER IN YOUR FRONT YARD! KEEP US POSTED ON HOW IT TURNS OUT-

MATT

Originally posted by BJ On Roids


have you seen his cages? :eek:

Yep:D

FIXXXXXAH.........TUBING IS HREW......I COULD GET DOM FOR ABOUT 170 A FOOT.
I TALKED TO THE PLACE I GET MY TUBING FROM....TUBE SERVICE.....THEY SAID "THE ONLY DIFFERANCE IS THAT DOM IS DIMINSIONALY CORRECT...THE PROCESS THAT BOTH ARE MADE ARE THE SAME........STRENGTH IS THE SAME"

93$$ A STICK.HOLY ISH THATS LIKE $2350.00

dang u killed tha tthing quickly dude, lol, gonan be swee ti bet. my 42 are like glass as long as it doesnt for a while with no air in teh tires. they were glas son my buddies scrambler that he drove daily too. jiMMy

dang, you are goin crazy with that thing man! Can't wait to see it when it's done

CAMBATCHUCK ........WHERE YOU LOCATED AT...SANTA CLARA ISNT THAT BIG I HAVE GAATA HAVE SEEN YOU AROUND

SLOW GOING BUT A FEW MORE......IILL BE DONE BENDING BY SUNDAY.......SHEETMETAL EARLY WEEK AND HOPEFULLY HOLLISTER AFTER THANKSGIVING

THIS ONE IS HOW THE BODY IS CONNECTED TO THE TUBING.....THERE WILL BE ANOTHER MOUND HIGHER UP ON THE PILLAR TOO

OOPS FORGOT THE PIC

THE SEAT MOUNTS

OOOOOOOOOOHHHHHHHHHH AAAAAAAAAAHHHHHHHHHHH:D

is there not gonna be a floor or something?

NOPE GOING FOR THE FLINSTONES LOOK:D

got anymore pics of the progress so far? I wanted to come by earlier, but I was at Hollister longer than expected...haha

SORRY NO NEW PICS YET:(

GOT THE MAIN CAGE DONE TODAY .........WILL ADD SPREADERS,GUSSETS, TOMARROW...........AND GET PICS:D

awesome...can't wait to see em

:D HERES HOW PROJECT BUNGHOLE IS COMING ALONG:D

:D

:flipoff2:

:eek:

in that last picture across the street there appears to be a red chreokee on 35's or so...whats up do you live on off-roaders' street?

sweet man...looks good so far

how far along are you by now?

FINISHED ENOUGH TO TAKE IT TO HOLLISTER TOMARROW:D :D

It looks sweet, even for bunghole :flipoff2:

that thing is looken sweet!!!

WELL I FINISHED ENOUGH TO TAKE IT OUT AND WHEEL.
STILL NEED THE REAR FENDER BARS.AND SOME SHEETMETAL WORK ON THE INSIDE FLOOR, AND THE OUTSIDE SKIN. ALSO NEED TO GET AN X BEHIND THE MAIN HOOP AND PAINT IT.:D

MORE HOLLISTER PICSHERE (http://www.pirate4x4.com/forum/showthread.php?s=&postid=1052284#post1052284)

that things looking sweet. What are you using for a bender? What was the rough cost of it with dies?

Badass. Badass.

My rig will have nightmares for the next 6 mos.

u gonna paint it the same green color as the flames again? the cage is lookin sick by the way

black would look better i think. maybe with some small flames on the cage too!:)

THIS TIME AROUND THW CAGE IS GANNA BE BLACK.
WITH NO FRONT OR REAR FENDERS I NEED TO KEEP THE CRUZAH ON THE DL TO KEEP IT A DAILY DRIVER.:D

something tells me the DMV doesnt know what this vehicle looks like:eek: :D :cool:

haha...good thinkin' ;)

any more updates?

ITS BEEN AWHILE SO HERE ARE SOME PICS.........

BEEN BUZY WAY BUZY BUILDIN STUFF FOR OTHER PEEPS.

BEEN TO HOLLISTER ONCE SINCE THE LAST PIC AND BROKE ......... A LOT.....IN TANK TRAP.....STARTED WITH THE FRONT 44 JOINT, THEN BENT FRONT SHAFT PUSHED MY TCASE BACK AND BROKE THE ADAPTER, WHICH TOOK OUT MY MUFFLER, NO WHEEL DRIVE WINCHING 1/4 MILE TOOK OUT MY WINCH CABLE.

THE CRUISER SAT FOR A MONTH NOW ITS APART AGAIN FOR SOME UPGRADES.:D

CUT OFF THE REAR FRAME AND TUBED IT, JONNIE JOINT SHACKLE HANGERS,BEADLOCKS FROM FRANKIE,FRONT 60, REAR 70 617 GEARS BOTH ARBS. FRONT LINKED WITH COIL OVERS. STARTED LAST WEEK SHOULD BE DONE IN ANOTHER WEEK OR TWO.

OH YEAH FINALLY MOVED ALL MY SHIT INTO A SHOP......AHHHHHHHHHH ROOOOOOOMMMMMMM

IM GANNA SCRATCH THE BLACK CAGE TACTIC AND ITS GANNA BE GREEN AGAIN:D

:D

;)

Looks good.

I dont know anybodys junk that changes more then yours:D

whats your overall width and wheelbase when complete?

:D

WB=101
WIDTH=?? FULL WIDTH 60 WITH 3"BS 15X10 WITH 42S

GOT THE REAR IN:D

OOPS THAT WAS THE BEADLOCK PIC.........

FRANKIE FINLAND LOCKS.........I RECOMEND THEM TO ANYBODY......THEY CENTER AND ARE VERY SICK:D

DO YOU THINK I WILL HAVE A PROBLEM WITH THIS REAR SHAFT???

ITS WORSE THAN THE PIC LOOKS.......THE YOKES ARE ABOUT 5-6" OFF.......SHAFTS ABOUT 28"

That is about how far off mine is...I think it is 15* left/right.

I run a 1410 standard joint at both ends and no vibration problems.

As long as the sum of all of your angles does not exceed the max operating angle of the ujoint you will be fine.

:D :D

WTF? Boat and cab already :flipoff2: Looks like there is room for my truck :massey::massey::massey:

man, that last setup sure did'nt last long!:rolleyes:

THE LAST SETUP IS STILL THERE I JUST MODIFIED IT A LITTLE MORE BY HACKING THE FRAME AND SWAPPING TO BIGGER AXLES.........

ALL THIS CAUSE I WANTED 42S:rolleyes: :D

no traction bar?

Originally posted by freds40
that things looking sweet. What are you using for a bender?

Ya, what he said.

Lookin sweet!!! I like how you did the cage!

Later.

Ken S.

TRACTION BAR IS NEXT......ITS GANNA BE A PITA CAUSE ON THE LEFT I HAVE MY EXAUST AND ON THE RIGHT THERE IS NOT MUCH ROOM ...........????WE'LL SEE

IM USING A JD2 WITH HOMEBREW HYDRO:D

oh man, SOO COOL, I love the idea of using jonny joints on the rear spring hanger; I havn't seen that done before. Can't wait to see it in action

. Can't wait to see it in action

ME TOO:crybaby2:

WELL AFTER HOURS UPON HOURS OF GRINDING ON THE AXLE AND FRAME IT WAS READY TO START FABBING. STARTED SAT AM AND HERES WHERE IM AT. THE ARMS ARE 1.75 .25 WALL SLEEVED WITH 2" .120.THE OTHER LINKS ARE 1.5 .25 WALL.I HAD TO MOVE THINGS A FEW TIMES EACH BUT FINALLY GOT IT RIGHT. THE TRACBAR IS VERY SHORT BUT LEVEL. WITH THE AXLE MOUNT OF IT ON THE DIF IT BARLY MOVES SIDE TO SIDE FLEXED UP.WITH BOTH SIDES DROOPED THE AXLE WILL MOVE A LITTLE BUT I HAVE TO LIMIT THE DIFF ANYWAYS CAUSE OF MY SHAFT ANGLE.

HERES A FEW PICS ILL POST MORE WHEN IM DONE EATING

:D ;) :eek:

:cool: :D

:mad: :confused: :D

OOPS

LAST ONE FOR NOW:mad: :flipoff2: :confused: :D ;)

Originally posted by 71RCKCRZR RYAN
:D ;) :eek:

the upper mount could use some bracing maybe ?
:beer:,

THAT WAS JUST TO FLEX IT ....SO IF I HAD TO CHANGE IT I WOULDNT HAVE TO GRIND AS MANY TACK WELDS....:D

HERES WHAT IT LOOKS LIKE NOW..........MIGHT ADD A FEW MORE GUSSETS

ANOTHER:D

HERES MY TRAC BAR MOUNT:D

nice brackets :flipoff2: :flipoff2: :flipoff2:

OK, I see what you mean... grinding brackets off is a PITA :eek:

:D

bye,

nice brackets


:flipoff2:

YOU GET YOUR RAM HOOKED UP YET

Originally posted by 71RCKCRZR RYAN
nice brackets


:flipoff2:

YOU GET YOUR RAM HOOKED UP YET

not yet big girl :D Half day at hollister next weekend? test our junk out...

What rod did you use to weld the steel brackets onto the cast center section?