|
Mightymaxm35 02-04-2011, 04:00 PM Hey everyone. I need to put gears in my truck cause the 35s make it more of a dog than it already is. Does anyone know what center section will fit in the front and back? Montero? raider? What are the biggest gear I can get? And anywhere I can get them? Thanks 4D55 Performance Inc 02-04-2011, 04:12 PM Yes the Monty or Raider gears will work as long as they are from a 4 cylinder. I am guessing you currently have the 4.22 gears. The Monty and Raiders have 4.62 gears which would help. longtrackrmk 02-04-2011, 05:30 PM Yes the Monty or Raider gears will work as long as they are from a 4 cylinder. I am guessing you currently have the 4.22 gears. The Monty and Raiders have 4.62 gears which would help. Is 6.5% gear reduction really worth the effort/money/trouble Sounds like some new axles are in order! 5.38s would be noticeable! just my 2 cents :D 4D55 Performance Inc 02-04-2011, 08:04 PM Is 6.5% gear reduction really worth the effort/money/trouble Sounds like some new axles are in order! 5.38s would be noticeable! just my 2 cents :D The 4.62 gears would be a great addition and well worth the money. Going with 5.38's on 35" tires would be complete overkill. Locating some 4.88 gears would be ideal, but they are hard to find for the 4 cylinder Mitsubishi's. I sold a set of 4.88 gear a few month ago that I pulled out of my pickup so they do exist but good luck finding a set. JohnEd 02-05-2011, 03:04 AM I do own a couple of 4.62 gears and possibly a set of 4.88 beside the ones I got installed in my rig. That is, if you can't find it anywhere closer to you. Good luck though, 'cause 35's are a must on a Mitsu :grinpimp: | |