|
GO 4LO 11-15-2002, 07:16 AM What stall speed converter are you guys running behind small blocks, and where did you get the TC's? The lowest I've found is 1800 rpm stall - is that low enough? Haven't decided yet whether to run the AOD I already have or get a C4. Crawl ratio will be well over 100:1. Thanks. Chris GO 4LO 11-15-2002, 10:30 PM btt Pat 11-16-2002, 12:26 AM Generally the converter is based on your cam.. Or what rpm your motor starts to make it best power..But for crawling go with as low as you can as long as you are running a stock motor that makes good power off idle..:D emsoffroad 11-16-2002, 01:15 AM Stock converters work the best, unless you are using a cam that comes in at 4000rpm. But in a light rig, anything that is not fullsize, the stock converter is fine. Pat 11-16-2002, 01:17 AM or in other words a stock converter:D | |