|
SunsetOrange 11-17-2002, 09:34 AM I need a T-18 shifter. I don't think there would be a different between a T-18a and just a regular T-18 shifter but if there is then I need the T-18a shifter. What could I get one off of besides a T-18 and if anyone has any extra ones then holla at me. Thanks. I've already posted this on the wanted but got no responses yet. :emb4: SunsetOrange 11-17-2002, 02:36 PM TTT mudtruck44 11-17-2002, 04:10 PM You can't find one at a junkyard or scrapyard? SunsetOrange 11-17-2002, 04:30 PM Haven't looked yet. I haven't put much effort in trying to find one yet because I'm not ready to install it for another couple of weeks. I posted this here so shipping would have enough time to get it here by the time I decide to install it. Whaley Enterprises 11-17-2002, 05:04 PM im assuming u need a t18a shifter for a jeep t18,, was just pulling the tranny out of my jtruck today,, i noticed that it seemed different from the ford t18 i have in my cj,,the case is different and the shift pattern is different i assume the shifters are different too.. i u just need parts to fix the shifter u have try rockland standard gear,,i got a shift fork from them for my ford tranny.. Neps 11-17-2002, 06:22 PM Give John at Border Parts a call, he's got about a thousand of these... BORDER PARTS Drive Train Components 3875 Bancroft Drive Spring Valley, CA 92077 619-461-0171 800-533-0171 Good prices too :D ROCK HUGGER 11-17-2002, 08:54 PM [QUOTE]Originally posted by OTTERGONEJPN ,, i noticed that it seemed different from the ford t18 i have in my cj,,the case is different and the shift pattern is different I thought Ford and Jeep T18's had the same shift patern. Are you sure you dont have an NP435:confused: Scouter 11-17-2002, 09:05 PM New shifters. http://www.partsmikeparts.com/t18.htm SunsetOrange 11-18-2002, 02:15 PM It's from a Ford Bronco I believe. The person we bought it from said that it had the correct bellhousing for the 258. But at parts mike it said all ford t-18's will bolt directly to the 258 bellhousing. Is this correct or am I just reading it wrong. JeepinIan 11-18-2002, 05:32 PM Having had a T-18 & a now having a T-18A in my CJ, the only shift difference that I can tell is that reverse on the 18 is to the right & up, and on the 18A it is to the right & down. The shifters are the same, as I had modified the one for the 18 & when I swapped the 18A in, I used the same shifter. CSP 11-18-2002, 09:06 PM Originally posted by JeepinIan Having had a T-18 & a now having a T-18A in my CJ, the only shift difference that I can tell is that reverse on the 18 is to the right & up, and on the 18A it is to the right & down. Not necessarily. Any mid-78 and older Jeep T18 or T18a is right and up. Any mid-78 and newer Jeep T18a is right and down. I have one of each and they are both T18a's with the 6.32 low gear. | |