Is there anyone out there selling just the parts needed to move to the Chevy bolt pattern from stock Unimog? I already have an existing disk brake conversion and would like to switch over to a more common pattern. I'm having trouble finding anything that is just the pattern conversion. Thanks in advance.

What are you running for a disk conversion on the six lug mog stuff?

What are you running for a disk conversion on the six lug mog stuff?

I'm not sure of all the details since the guy did it before I acquired the axles but I run F-250 calipers and the disks are four-piston. I wish the guy just did the conversion while he was there.

Do you have any pics of what you have now? I think there are a few on here doing the 8 lug conversion.

We may do another run of wheel adaptors/spacers. They are two inches thick.

Here is a pic

http://i2.photobucket.com/albums/y29/bulltear/th_mog.jpg?t=1298477521

http://i2.photobucket.com/albums/y29/bulltear/mogadaptor.jpg
http://i2.photobucket.com/albums/y29/bulltear/mogadaptor2.jpg

We may do another run of wheel adaptors/spacers. They are two inches thick.

Here is a pic

http://i2.photobucket.com/albums/y29/bulltear/th_mog.jpg?t=1298477521

http://i2.photobucket.com/albums/y29/bulltear/mogadaptor.jpg
http://i2.photobucket.com/albums/y29/bulltear/mogadaptor2.jpg

I'd be interested. Do the six-lug nuts set into the spacer?

Yes they do...you may have to run longer studs though on spacers like these. They would run about $150ea

Any takers before we order material?

Any takers before we order material?

Do you have any photos of them on a rig? Or anything else you can send me about them? I am definitely interested but with my current setup I am already crazy wide and am wondering if 2" per side is too much.

I ran them years ago on mogs full width and hummer wheels so I had massive backspacing. The only other real alternative would either be custom wheel, wheel centers or 8 lug conversions. I will hunt for pics.

I ran them years ago on mogs full width and hummer wheels so I had massive backspacing. The only other real alternative would either be custom wheel, wheel centers or 8 lug conversions. I will hunt for pics.

PM works from here on out if you're alright with it. I have the same setup too. I'd be interested in four.

With 40" MTRS 17" wheel
http://i2.photobucket.com/albums/y29/bulltear/grandsit3.jpg

My ZJ before it was parted. 44 tsls 16.5" wheel

http://i2.photobucket.com/albums/y29/bulltear/zjhaha.jpg

http://i2.photobucket.com/albums/y29/bulltear/grandsit4.jpg

Do u have a website where I could order these adapters when I'm ready?