http://artecindustries.3dcartstores.com/assets/images/truss/dana60/ram-truss2.jpg (http://artecindustries.3dcartstores.com/Dana-60-Chevy-Front-Ram-Mount-and-Truss_p_180.html)

CHEVY DANA 60 HYDRO RAM MOUNT & TRUSS

Artec Industries is excited to announce the NEW Chevy Front Dana 60 Hydraulic Ram Mount and Truss. This heavy duty truss system is designed to take serious abuse and protect some of the most vital and expensive components of your vehicle - your steering. The unique design places your ram in its most affective and strongest location - close to the axle centerline not high above it, and yet protects it from the rocks with the integrated 1/4" thick skidplate. Fits both PSC motorsports and Howe Performance double-ended hydraulic rams. Works perfectly with our ULTIMATE Dana 60 High Steer Arms giving you the strongest hydraulic steering solution on the market. The 3/8" thick truss extends end-to-end of the axle tube providing not only a location for mounting your 3 and 4 links, but also truly reinforcing the axle itself against bending and shearing. The unique gusseting design allows both the truss and ram mount to completely reinforce eachother in every direction.

Features include:

•3/8" thick mild steel truss top and 1/4" mild steel ram mount and gussets. Precision CNC cut and bent for great fitment.*

•Truss is low profile allowing link joints to be mounted with ideal geometry - about 8 inches from the axle centerline.

•Truss spans entire length of axle for complete reinforcment of the axle tubes - not just for mounting links.

•Truss is reinforced using interlocked 1/4 thick gussets for maximum strength and easy assembly.

•Truss is tied into Ram Mount with a 1/4" thick bridge which also further protects your ram from trail damage

•Ram Mount and Gussets feature drainage holes for easy cleaning and reduced weight.

•Ram Mount doubles as an axle skid plate, allowing protection for your ram and tie rods an spans the length of the axle tube for more reinforcement against bending and shearing.

•Ram Mount incorporates an additional 1/4" thick bolt on skid plate in front of differential to allow easy removal of gears. Skid plate is bolted using included countersunk bolts which hold up to trail damage better than other style bolts and don't get hung up on obstacles.

•Fits both PSC motorsports and Howe Performance* doubled ended hydraulic rams.

•Clearanced to use with rotated knuckles and pinions.

•Includes a weld-on A-blade logo for ram mount and a A-blade logo cutout in the bridge.

•Includes additional 1/4" thick gusset for welding removable skid plate to an aftermarket mild steel differential cover. (Optional use; will require trimming)

•Overall low profile design means your axle is stronger, sleaker, easier to fit into any vehicle, and less likely to interfere with rocks or other parts of your vehicle such as your oil pan.

The Artec Industries Chevy Dana 60 Ram Mount and Truss is simply the best available on the market. Get yours today.

NOTE: This kit requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation.
*Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required.

LINK (http://artecindustries.3dcartstores.com/Dana-60-Chevy-Front-Ram-Mount-and-Truss_p_180.html)

$399.99 get 10% off when you enter coupon code: "pirate4x4"
Prototype on display at KOH with our ULTIMATE High Steer Arms.
http://artecindustries.3dcartstores.com/assets/images/KOH11/KOH11-d60display.jpg

78-79 FORD VERSION NOW AVAILABLE TOO!
http://artecindustries.3dcartstores.com/assets/images/truss/dana60/trd60f01rt-one.jpg (http://artecindustries.3dcartstores.com/Dana-60-FORD-Front-Ram-Mount-Truss-78-79_p_205.html)

Any plans for a ford version? Very interested!

Any plans for a ford version? Very interested!

X2 on the Ford version? I am also very interested. Looking forward to seeing what that beast cost.

one of the nicest setups yet . interested in ford version and a price

Ford version is in the works next. We also have a few other axle truss systems in the works as well, front and rear.

ORDER HERE (http://artecindustries.3dcartstores.com/Dana-60-Chevy-Front-Ram-Mount-and-Truss_p_180.html)

http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/truss-skid-CU-small.jpghttp://artecindustries.3dcartstores.com/assets/images/truss/Dana60/truss-gusset-closeup-small.jpghttp://artecindustries.3dcartstores.com/assets/images/truss/Dana60/truss-bridge-CU-small.jpghttp://artecindustries.3dcartstores.com/assets/images/truss/Dana60/jig-closeup-small.jpg

Another picture.
http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/ram-truss1.jpg

Here are some additional brackets you might use in addition to our new truss.

Coilover tabs (http://artecindustries.3dcartstores.com/Coilover-Tabs-for-Chevy-D60-Front-Truss_p_181.html) that tie into both the inner "c" and the truss
http://artecindustries.3dcartstores.com/assets/images/truss/dana60/coilover-mounts.jpg (http://artecindustries.3dcartstores.com/Coilover-Tabs-for-Chevy-D60-Front-Truss_p_181.html)


Upper Link mounts (http://artecindustries.3dcartstores.com/Truss-Upper-Link-Mounts-_p_182.html) for the top of the truss
http://artecindustries.3dcartstores.com/assets/images/truss/link-mount-truss.jpg (http://artecindustries.3dcartstores.com/Truss-Upper-Link-Mounts-_p_182.html)

Thanks for the orders.

For those with Ford axles, what year axle do you have? We will likely have to produce at least a couple Ford designs due to the variances in years.

the 78/79 Ford high pinion is super popular and is what I have. i would love to get this for my ford 60. i also have the reid racing knuckles so I love your high steer arms that tie to the reid arms.

Let me know if you need me to template my front 78 Ford d60. I could get it templated and in CAD if it helps you turn a new version around quickly.

PM sent. thanks for working with us.

I have some rear trusses that'll be finishing up in the next couple of days.

the 78/79 Ford high pinion is super popular and is what I have. i would love to get this for my ford 60. i also have the reid racing knuckles so I love your high steer arms that tie to the reid arms.

Exact ditto for me. Except I have new inner c's too.

would this fit a dodge dana 61 front?

Couldn't tell you but if you send me a photo of the axle with some tube and casting widths, we could look into it.

Ive got a mid-80's ford 60....wanted to get your high steer arms but couldn't decide on a truss....until I saw this. Definitely interested if you do a Ford version!

78-79 Ford version is all modeled up. the 80's version will follow. I'll post them on the website for sale once I cut them out and get some pictures. Pricing will be the same as the Chevy.

http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/d60-Ford-78-79-assembly.jpg


Thanks for the orders everyone. We are working on pricing for PACKAGE DEALS with high steer arms, knuckles, tie rods, hydro kits, and inner c's in any combination. If ordered together it'll save some serious cash.

I sent you a PM, but forgot to ask if this will fit any high steer arms or just yours. Also can you include those shock C tabs brackets in the quote.

78-79 Ford version is all modeled up. the 80's version will follow. I'll post them on the website for sale once I cut them out and get some pictures. Pricing will be the same as the Chevy.

http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/d60-Ford-78-79-assembly.jpg


Thanks for the orders everyone. We are working on pricing for PACKAGE DEALS with high steer arms, knuckles, tie rods, hydro kits, and inner c's in any combination. If ordered together it'll save some serious cash.

78-79 ford truss to 34472. Thanks

Any updates?

Still working on some adjustments. I have about 5 R&D projects going simultaneously so we'll have a huge selection of trusses hitting soon. Stay tuned.

A bunch of these are shipping out tomorrow. These are gaining popularity very quickly. Thanks for the orders.

The Ford version will be slightly delayed while we do some thorough testing and fitting. Hopefully we'll make some good progress in the next couple of days.

In case you missed it, the truss and ram mount is now offered in a package deal with our ULTIMATE Dana 60 High Steer arms and other add on accessory parts as well, such as a tie rod kit, the full hydraulic ram kit, Reid Racing knuckles and inner c's, upper link mounts, and coilover mounts. Add only what you need and save 10-15%. That adds up quickly.

http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/Truss-HSA-KIT.jpg
http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/Truss-HSA-KIT-2.jpg
http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/Truss-HSA-KIT-3.jpg (http://artecindustries.3dcartstores.com/Dana-60-Chevy-Front-Ram-Mount-and-Truss-KIT_p_183.html)
LINK (http://artecindustries.3dcartstores.com/Dana-60-Chevy-Front-Ram-Mount-and-Truss-KIT_p_183.html)

Bunches of these shipped out today. Thanks for the orders.

Any future designs for one without the ram mount?

The FUTURE IS NOW. We cut out the Chevy D60 truss this afternoon. I'll have it up on the website on Monday when I get pics.

Ford version will follow later in the week. Its finalized and just needs to be cut out. Same goes for the Ford version with the ram mount.

14 bolt rear was also cut today and I'll release it on Monday as well. That's 4 new trusses in a week!:eek:

I'll take a 88 ford D60 when ya get it..thanks

I'll work on the later Ford ones this week. Should go quickly since I have the earlier Ford's done. We cut them out today but didn't quite get them bent up yet so I guess I'll have to get pictures tomorrow.

Today was so busy in fact, we had to have a few extra guys helping out in shipping. Thanks for keeping us busy.

anxiously waiting for an 88 Ford version! :)

So does the pirate4x4 discount code apply to these as well? :D

Pirate coupon does not apply during the introductory sale. It applies to all other items that are not on sale.

I'll just take a moment to say that when we introduce a new product, we'll almost always offer the product at 20% off. This is the most and only time we'll offer our products at this deep of a discount. We will offer sales from time to time but they won't discounted as much as the introductory sale.

So if you are in the market for one of our new products, the best price you'll get is during the introductory sale. Pick it up today for the best pricing.

That being said, I'm going to extend the sale on this Chevy Dana 60 Ram Mount and Truss for two more weeks. Normally it'll be $399 but you can pick it up during this sale at $319 until 4/11/2011.

The Ford version will have its own introductory sale, so don't worry that you won't have a chance to buy it at a great price.

Any plans for a 2nd gen pre 2000 Dodge Ram D60 version? I need to beef up around the CAD housing!

I love this setup, but my long-side-narrowed 79 Dodge 60 means it's a no-go as far as I can tell :(

Any plans for a 2nd gen pre 2000 Dodge Ram D60 version? I need to beef up around the CAD housing!

No plans yet but once we are done with our current projects, we'll look into other axles. I'm planning on doing some dana 44 versions next as well as an 8.8. I'll keep this one in mind too.

I love this setup, but my long-side-narrowed 79 Dodge 60 means it's a no-go as far as I can tell :(

Sending you a PM. We'll see what we can do.

No plans yet but once we are done with our current projects, we'll look into other axles. I'm planning on doing some dana 44 versions next as well as an 8.8. I'll keep this one in mind too.

PM me when you decide to research it. I know it's not a common builder axle but mine's already built. Can take measurements, etc have 2 at the house.

Any updates on the 78/79 Ford 60 or the 14 bolt?

pics first thing in the morning. I ran out of daylight today.

update on a chevy truss with out the full hydro setup?

Snapping pics in about an hour.

Here's some pics of the Chevy Dana 60 Front Truss and the 14 bolt Rear Truss. I'll put them up on the website with the pricing tomorrow. Enjoy!

http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/TRD60C03T-one.jpg

http://artecindustries.3dcartstores.com/assets/images/truss/14bolt/TR14BR01T-one.jpg

Any updates on the 78/79 Ford Dana 60 Front full hydro truss?

I'll have pics of the 78-79 Ford version tomorrow. Hopefully up on the website as well then too.

Nice, ill be ordering one of these once they go on the site.

Alright, here they are...

Chevy Dana 60 Front Truss (http://artecindustries.3dcartstores.com/Chevy-Dana-60-Front-Truss_p_204.html) - Introductory Sale $131.99
http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/TRD60C03T-one.jpg (http://artecindustries.3dcartstores.com/Chevy-Dana-60-Front-Truss_p_204.html)


14 Bolt Rear Truss (http://artecindustries.3dcartstores.com/14-bolt-Rear-Truss_p_203.html) - Introductory Sale $171.99
http://artecindustries.3dcartstores.com/assets/images/truss/14bolt/TR14BR01T-one.jpg (http://artecindustries.3dcartstores.com/14-bolt-Rear-Truss_p_203.html)

Badass products....all I have to say. Can't wait to order the later ford version.

Nice work guys!

Placed a order today for the 60 truss and 14 bolt truss.

For the price I couldnt touch the cost of the metal plus the time to build both truss correctly.


Cant wait for it to arrive
Duc

And now the.......

FORD 78-79 Dana 60 Ram Mount and Truss (http://artecindustries.3dcartstores.com/Dana-60-FORD-Front-Ram-Mount-Truss-78-79_p_205.html)

http://artecindustries.3dcartstores.com/assets/images/truss/dana60/trd60f01rt-one.jpg (http://artecindustries.3dcartstores.com/Dana-60-FORD-Front-Ram-Mount-Truss-78-79_p_205.html)

Updated the original post to include the 78-79 Ford version.

Thanks for the orders.

just ordered a standard chevy 60 truss. Thanks.

Thanks for the orders. We're cutting out alot of trusses tomorrow.

do you sell just the ram mount?

Yes we will be offering the ram mounts separately as well. I will get pricing on those shortly.

Update on the later Fords?

Working on it...though it might be delayed a little with a new baby arriving any day now.

No worries, congrats on the kid! :D

Congrats on the kid! Boy or girl? 1st one? Kids are the ultimate fabrication project...

2nd boy. The first is 3. He's a blast. Thanks.

congrats on the kiddo. Got my tracking number for my 14B truss yesterday. THANKS!!

Don't know if I missed it but will the Chevy Front D60 truss with Ram mount work with any highsteer arms / knuckles? I have Solid knuckles with their keyed arms already and just want to know if this will work with them.............

thanks
Jeff

I can't say it would work for sure with the solid axle set-up, the ram might end up a little low. Shoot me over some dimensions of where your arms and tie rod holes are and I can check it out for you. -Artie

I can't say it would work for sure with the solid axle set-up, the ram might end up a little low. Shoot me over some dimensions of where your arms and tie rod holes are and I can check it out for you. -Artie

I haven't drilled the holes in my steering arms yet so not sure what dimensions I can give you to help figure this out? Please let me know

thanks
Jeff

I'd also be really interested in a Dodge Dana 60 truss. I have an 02 cummins and don't want to swap the cad 60 out. I'm sure it's pretty low on your priority list, but if you every built one that worked with the factory coil mounts and cleared track bar and steering and had a mount for Ram assist instead of just full hydro, I'd for sure buy it. Maybe rear truss's for the dodge 70's and 80's as well?

Just recieved the trusses from UPS. Best package parts I have ever recieved thru ups. Parts look just as good in person.


Thanks

I haven't drilled the holes in my steering arms yet so not sure what dimensions I can give you to help figure this out? Please let me know

thanks
Jeff

Basically we are going to need to know where the mounting locations would be for the linkages between the ram and arms. We already know where the ram will be located, so really we just need the general location of where you could drill your holes relative to the axle housing so we can see how far off the ram is. (Most likely you will need to mount the linkages under the arms.) The linkages should end up pretty level and slightly angled back towards the ram when the tires are straight.

The way that this truss was developed was using the double shear setup found on our Ultimate Dana 60 Arms (http://www.artecindustries.com/High-Steer-Arms_c_126.html). It places the linkage mount midway between the arm and the stock TRE mount location, maximizing the strength of the knuckle.

Hopefully this helps, feel free to give us a call and we can talk more in depth. -Artie 520-906-9977

Just recieved the trusses from UPS. Best package parts I have ever recieved thru ups. Parts look just as good in person.


Thanks

Thanks again for the order!!!

very pleased with the communication and quality of my front truss.i too would be interested in a dana 80 rear truss to match my front.Thankshttp://www.anythingscout.com/images/cache/7542-original_ad63636c0dd4b5ae.jpg?1302547602

Received mine today as well:smokin:


Delivery driver is starting to give me dirty looks with all my heavy brown boxes for these projects:laughing:


Thanks again, great service and communication throughout the transaction:beer:

-shawn

Thanks agian for all the orders, and please keep the install pictures comming!

Came to work this morning and saw a bunch of these were ordered overnight. Thanks for the business.

Any updates on the '78-'79 Ford truss only? I'm looking for one without the ram mount, thanks.

I'm working on getting to those and the late 80s ram mounts and trusses as soon as I can. We've been slammed and my R&D time has taken a hit. Hopefully early next week, I'll have everything done.

Made some serious progress on the 80s Ford truss today and a Chevy ram mount for leaf sprung trucks. Should have them ready early next week.

I need a ford dana 60 rear truss that I will be using on a TJ setup. Will the truss allow enough room for the spring perches? Great looking products guys keep up the great work!

I will be working on some vehicle specific version in the near future that'll make axle swaps really easy. You could probably modify the existing version if you really needed it.

On another note, we finished prototype testing on a Chevy dana 60 leaf spring version ram mount. I should have it available for sale soon.

Got my 14 bolt truss. Looks great. I like the "insert tab A into slot B" concept. Goes together nice.

Thanks. We thought it would make it really easy to assemble and line up properly. A few tack welds and the whole thing holds together making it easy to install.

We are shipping alot of the truss and ram mount today. Thanks for all the orders. I cut out some of our new trusses too, so hopefully I'll have pictures up by the end of the day.

I know I have a goofy narrowed Dodge 60 front - is there a ram only mount available? This is a linked vehicle, double ended ram. Thanks!

I will be working on some vehicle specific version in the near future that'll make axle swaps really easy. You could probably modify the existing version if you really needed it.

On another note, we finished prototype testing on a Chevy dana 60 leaf spring version ram mount. I should have it available for sale soon.

Did the leaf sprung chevy version ever fly? update please! credit card in hand waiting to order!!

Did the leaf sprung chevy version ever fly? update please! credit card in hand waiting to order!!

Yes, I just have one more piece to cut and then I'll get pics.

Do you run any type of military discount?

any update?

Do you run any type of military discount?
We sure do, give us a call.

any update?

It is totally complete and ready for pictures, we also have the pricing finalised! Pictures will be up in the am tomorrow, sorry for the delay been very busy.

It is totally complete and ready for pictures, we also have the pricing finalised! Pictures will be up in the am tomorrow, sorry for the delay been very busy.

Crap! I need to get my axles and brakes sold to get some $$!!

sweet.....i'll be giving you a shout in the morning :D

how far down the list is a 2nd Gen Dodge D60? Don't care about coil buckets or anything, just bare axle since everything is getting changed anyway.

Also, you have anyone running leafs on your rear truss? Pics?

Alright here is the Chevy Front Dana 60 Leaf Spring Ram mount. Instead of just offering the ram mount, we decided to build a small truss on the axle to which the ram mount can tie into for added strength. This truss bolts up to a provided 3/8" thick leaf spring plate for even more strength. Shipping will begin on Monday.

http://artecindustries.3dcartstores.com/assets/images/truss/dana60/trd60c05rtone.jpg (http://artecindustries.3dcartstores.com/Dana-60-Chevy-LEAF-SPRING-Ram-Mount_p_213.html)

ORDER HERE (http://artecindustries.3dcartstores.com/Dana-60-Chevy-LEAF-SPRING-Ram-Mount_p_213.html) $359.99

how far down the list is a 2nd Gen Dodge D60? Don't care about coil buckets or anything, just bare axle since everything is getting changed anyway.

Also, you have anyone running leafs on your rear truss? Pics?

I don't have a dodge d60 here to R&D from. PM me and maybe we can help eachother out. I have quite a few other axles that I've already started work on but it'll probably be a variation of a current truss so it could be pretty quick. I'd be interested in knowing the specs on the coil buckets on that axle too.

I don't have any pics on a leaf sprung rear axle with our truss. Most of the orders are on our website and I don't know what the items are going on unless someone sends me pics which is rare.

And now the Ford Dana 60 TRUSS for 78-79 axles.

http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/TRD60F03Tone.jpg (http://artecindustries.3dcartstores.com/Ford-78-79-Dana-60-Front-Truss-_p_214.html)

ORDER HERE (http://artecindustries.3dcartstores.com/Ford-78-79-Dana-60-Front-Truss-_p_214.html) $164.99

The later Ford d60 ram mount and truss being bent today. Hopefully I'll have it up on Friday. :smokin:

good, cause i'm waiting :)

Here it is.....the 80s Ford Truss and Ram mount for use with Ford Kingpin axles with 3 inches of tube on the drivers side.

Now available for preorder. I'll get better pics on monday

http://artecindustries.3dcartstores.com/assets/images/truss/dana60/trd60f06rtone.jpg (http://artecindustries.3dcartstores.com/Dana-60-FORD-Front-Ram-Mount-Truss-80s_p_216.html)

$419.99

LINK (http://artecindustries.3dcartstores.com/Dana-60-FORD-Front-Ram-Mount-Truss-80s_p_216.html)

Badass...Ill be ordering soon!

I know I have a goofy narrowed Dodge 60 front - is there a ram only mount available? This is a linked vehicle, double ended ram. Thanks!

Need the same thing. Probly narrowed the same amount to bolt into a toyota. A universal ram mount only would be pimp...

for the 80's ford truss system do you sell just the truss itself without the ram mount option?

Just placed the order for my 80's truss!!! :smokin:

Thanks guys!

Kurt

Need the same thing. Probly narrowed the same amount to bolt into a toyota. A universal ram mount only would be pimp...
That gonna be a hard thing to do and have it be a similar style. I've received lots of questions about narrowed axle and compatibility with these trusses and ram mounts.

Here's the thing, these ram mounts have a cutout for the casting section. They are also designed to place the ram exactly in the middle of the axle width wise so you have equal length tie rods. The ram mounts end less than an inch before the inner c's. Essentially making this system work to keep you tie rods equal length, you'd have to cut off much of one side of the ram mount and then mount the ram further towards the short side and in many cases that would put one of the ram clamps over the cutout for the center section.
I don't think a universal ram mount is really possible, unless its really barebones and hacked together looking but I'll try to figure out something for you narrowed guys that might satisfy your needs too.

for the 80's ford truss system do you sell just the truss itself without the ram mount option?

We will offer it very soon. The majority of requests were for the integrated ram mount but with a few gusset changes, it becomes just the truss.

Just placed the order for my 80's truss!!! :smokin:

Thanks guys!

Kurt

Thanks for another order kurt.

Need the same thing. Probly narrowed the same amount to bolt into a toyota. A universal ram mount only would be pimp...

Yep, exact same config... I'd love to see one soon since I'm knee deep in my buggy build right now.

Yep, exact same config... I'd love to see one soon since I'm knee deep in my buggy build right now.

I'll try but I have one special truss I'm working on right now thats gonna be first. Should be done by end of the week with that one, then I'll move on to yours.

I'll try but I have one special truss I'm working on right now thats gonna be first. Should be done by end of the week with that one, then I'll move on to yours.

Superb :cool2:

anyone have any reviews or pics of the install yet?

Quick question....for the 80's Ford truss that I ordered...will the coilover tabs listed on your site work on it or do you have others specifically for the ford 60? (different angles, etc)

anyone have any reviews or pics of the install yet?
There should be some pics around since there are so many that have gone out the door. Here's some photos we took during our install that are going to go in a tech article we're working on. Gives you an idea of how easy eveything jigs up. Not complete photodocumentation by any means but I had them ready now.

http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/Truss-build1.jpg
http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/Truss-build2.jpg


Quick question....for the 80's Ford truss that I ordered...will the coilover tabs listed on your site work on it or do you have others specifically for the ford 60? (different angles, etc)

80s Ford tabs are different and haven't been listed. I'll get you the right ones, don't worry.

i'll be ordering a set to-------^

Any thoughts on making different rear axle trusses? I would love one of your trusses on a D70HD...

I am definitely making more rear axle trusses. In fact all I've been working on for the past few days are trusses so you'll see some more coming shortly. If its any help, I know for a fact, our Rear Dana 60 truss fits a Dana 70U with very minor trimming. I'm not sure how different the U and HD 70s are but it could work.

My to do list is growing quite a bit now so please be patient with us as we work on developing trusses to fit everyone's needs.

I don't have a dodge d60 here to R&D from. PM me and maybe we can help eachother out. I have quite a few other axles that I've already started work on but it'll probably be a variation of a current truss so it could be pretty quick. I'd be interested in knowing the specs on the coil buckets on that axle too.

I don't have any pics on a leaf sprung rear axle with our truss. Most of the orders are on our website and I don't know what the items are going on unless someone sends me pics which is rare.

If you need me to, I can take a bunch of pics and measurements for you and email them to you? Super interested in getting this for my 02 Dodge 2500.

If you need me to, I can take a bunch of pics and measurements for you and email them to you? Super interested in getting this for my 02 Dodge 2500.

Please do.

For anyone interested in helping with development of new trusses and ram mounts, here is a link to a dimensions graphic I made that pretty much gives me some of the dimensions I need (at least for the dana 60). You can adapt is for use with other axles as well, but I'll need additional dimensions for the contours of the cutout. I already have Dana 60s, Dana 44s, and 14bolts here so no need to send casting contour info for those. http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/axle-specs.jpg

PLEASE PM OR EMAIL ME THE DIMENSIONS. ALSO PLEASE PROVIDE DIMENSIONS ACCURATE TO AT LEAST THE 1/8 INCH OR SMALLER. IT REALLY HELPS WHEN MODELING TO HAVE SOMETHING ACCURATE.

A little sneak peek of whats coming up next.............
http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/Currie-Ram-Assembly-front2.jpg

Another teaser but a real photo this time........coming soon!!
http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/TRCRJP01RT-one.jpg

and another:p
http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/TRCRJP01RT-two.jpg

Quit posting these teaser pics! I'm getting anxious for MY truss to get here!! :D

I know you are. They're slated to ship on the 31st.

Speaking of FORD trusses and ram mounts, I've put the COMPLETE FULL HYDRO KIT FOR FORDS on our website finally. I need to update the photo still but at least those who've been waiting to get a smokin deal on an entire kit can now purchase online.

http://artecindustries.3dcartstores.com/Dana-60-FORD-Full-Hydro-Mounting-KIT_p_217.html

Sold quite a few dana 60 trusses over the weekend...thanks for the orders.

The 80's ram mount and trusses are finishing up right now and we'll get them out the door today. Thanks for your patience.

Any plans to make a front d60 truss/ram mount for the '91-'93 dodge dana 60's, as they are 2" narrower than the Chevy d60's?

Any plans to make a front d60 truss/ram mount for the '91-'93 dodge dana 60's, as they are 2" narrower than the Chevy d60's?

Possibly, I'm working on some Dodge Dana 60 ram mount and trusses now so it'll likely be next. If you'd like to see it produced, please help me out by providing the information in the quote below. Thanks.

For anyone interested in helping with development of new trusses and ram mounts, here is a link to a dimensions graphic I made that pretty much gives me some of the dimensions I need (at least for the dana 60). You can adapt is for use with other axles as well, but I'll need additional dimensions for the contours of the cutout. I already have Dana 60s, Dana 44s, and 14bolts here so no need to send casting contour info for those. http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/axle-specs.jpg

PLEASE PM OR EMAIL ME THE DIMENSIONS. ALSO PLEASE PROVIDE DIMENSIONS ACCURATE TO AT LEAST THE 1/8 INCH OR SMALLER. IT REALLY HELPS WHEN MODELING TO HAVE SOMETHING ACCURATE.

I posted this on Facebook but figured I'd offer it here as well. We need installed truss photos.

Lets make this more interesting. FREE STICKERS FOR POSTING INSTALLED TRUSS PHOTOS!!!! Two free stickers per truss. If you post alot of pictures, I'll throw in some extra stickers. I really need REAR TRUSS photos so I'll include a couple extra stickers for those too. I know how much you all like stickers :)


You don't need to post a million photos here just one or two of each will do, but please send as many as you'd like to sales@artecindustries.com. This offer will end June 15th. And this applies to any truss too.

http://www.facebook.com/artecindustries <---Like Us

Any plans to do a spider 9 housing kit? maybe a 609 kit? Or would the 60 kits work with that w/ mods?

Any plans to do a spider 9 housing kit? maybe a 609 kit? Or would the 60 kits work with that w/ mods?

Maybe but it'll be a ways down the road. My to do list is pretty long right now but i have some stock 9 inch housings I'll be doing soon. the 60 kits probably wouldn't work right and I know they wouldn't look as good as a 9inch specific truss.

How wide are the chevy front trusses? I have a narrowed chevy 60 and need to know if it will fit.

Sent you a message on your website with the measurements for the 02 Dodge Dana 60 truss and ram mount. I also took a bunch of pics if you need them that show the coil buckets, and cad, and all that stuff.

Just realized I never put the 81-91.5 Truss only up on the website. Sorry about that.

Now available.
http://artecindustries.3dcartstores.com/assets/images/truss/dana60/trd60f08t-one.jpg (http://artecindustries.3dcartstores.com/Ford-81-915-Dana-60-Front-Truss_p_218.html)

How wide are the chevy front trusses? I have a narrowed chevy 60 and need to know if it will fit.

truss is 42" and ram mount is 43". It leaves almost 2 inches from the end of the truss to the inner c and a little over 1.375" for the ram mount. Everything is very form fitting to the casting though and the way its set up centers the ram along the axle. If your like most who've cut off 3-4 inches off the long side, it won't work right.

Sent you a message on your website with the measurements for the 02 Dodge Dana 60 truss and ram mount. I also took a bunch of pics if you need them that show the coil buckets, and cad, and all that stuff.

Thank you. I'll add it to my R&D notes. You can send photos to sales at artecindustries dot com (substitute symbols for at and dot).

just pulled the gun and just bought one!! cant wait

thanks for all the recent Truss orders.

FYI, we're running a little behind since there has been so many trusses ordered recently. We're working hard to catch up and get these shipped in the next few days. Sorry if it ruins any weekend build plans, but if you ordered a truss within the past few days, your order will likely ship in a couple days. PM me if you have any questions.

Any plans for a 10.25" ford rear truss? I will be using your dana 60 full hydro kit and I'd like to have one of your setups for the rear too. Its a great looking product.

Thanks,
Jason

Any plans for a 10.25" ford rear truss? I will be using your dana 60 full hydro kit and I'd like to have one of your setups for the rear too. Its a great looking product.

Thanks,
Jason

Yes but its on a long list of trusses we'll be developing. If you plan on getting the d60 hydro kit, I wouldn't wait for the rear truss to come out if you can make progress on the front end. They would ship separately anyways.

Another teaser but a real photo this time........coming soon!!
http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/TRCRJP01RT-one.jpg

Would this truss work with Reid inner C's and knuckles and your ultimate high steer kit on the rock jock? Looks like it would sit a little high for it to work.

Would this truss work with Reid inner C's and knuckles and your ultimate high steer kit on the rock jock? Looks like it would sit a little high for it to work.

This was purpose built and isn't the final design. There is some additional development I want to do on this product before we release it which includes mounting the ram lower below the high steer arms so that it will tie into Reid knuckles with our Ultimate high steer arms.

We have lots of the Chevy version in stock and ready to ship. I have a couple of each of the FORD versions ready too for the quickest buyers.

just got mine in today.cant wait to install it looks awsome

Great. Post some pics when you get a chance. Thanks for the order.

Great. Post some pics when you get a chance. Thanks for the order.

will do hopefully get it on sunday.
now i gotta get my buggy done so i can actually use it.

15% OFF TRUSS SALE - Ends July 1st
Discount shown in shopping cart. Excludes kits and product on introductory sale.

In stock and Ready to ship!

Anything on the narrowed dodge 60 ram mount?

Anything on the narrowed dodge 60 ram mount?

finishing design on one today or tomorrow. What is the length on your long axle tube, casting to inner c?

finishing design on one today or tomorrow. What is the length on your long axle tube, casting to inner c?

Looks 19.5 from diff casting to inner C. inner side of the C was ground some to clean it up old weld but not much should have been removed if it matter's.

Thanks for working on these:smokin:

Looks 19.5 from diff casting to inner C. inner side of the C was ground some to clean it up old weld but not much should have been removed if it matter's.

Thanks for working on these:smokin:

Perfect, the truss I'm finishing up will work for you. I hope to have it up on the website in the next few days.

Awesome:grinpimp:

I guess alot of people like the sale so far and its only been up a day. Thanks for the orders. Our shipping dept is going to have a busy two weeks.:D

Daaamn....the 15% off sale is making it even more tempting to see if I can get your rear D60 truss to work on my Tera60.....

:eek:

Daaamn....the 15% off sale is making it even more tempting to see if I can get your rear D60 truss to work on my Tera60.....

:eek:

Send me some photos of your axle. I'm thinking maybe you can rotate the whole truss forward so the diff cover clears and maybe a little grinding can make it work too.

We're doing something fun on Facebook that might get YOU closer to owning one of these bad boys. Check it out...http://www.facebook.com/artecindustries

Our prototype Narrowed Dodge ram mount and truss is cut. Just gotta bend it up and its off for testing. I'll post pics soon.

Don't forget to order the matching 14bolt (http://artecindustries.3dcartstores.com/14-bolt-Rear-Truss_p_203.html) or rear dana 60 (http://artecindustries.3dcartstores.com/Dana-60-Rear-Truss_p_200.html) axle truss when you order the front truss. We've had alot of people call back recently and order a rear truss after they realized how bad their old rear truss looked and functioned compared to their new front truss. :grinpimp:
http://artecindustries.3dcartstores.com/assets/images/truss/14bolt/assembled-14bolt-three.jpg (http://artecindustries.3dcartstores.com/14-bolt-Rear-Truss_p_203.html)

...I'm one of those people. Just ordered my rear D60 truss!

Bump for an awesome product!

:grinpimp:

Front 60 Truss and Ram mount...

The rear is a 60 Truss on a 70U and with very little trimming it fit my 70U perfectly.....

Getting ready to install the Reid Knuckles and Artec Steering arms. I will post up more pics of the finished product ASAP....

Looks really good. Thanks for posting those. I'm glad to see how little trimming was required to make the rear Dana 60 truss fit the Dana 70U.

If you haven't already entered....our truss GIVEAWAY is in Gen4x4
http://www.pirate4x4.com/forum/showthread.php?t=989577

It's great to see the response we've gotten from these. Thanks for the orders, lets see some more build pics.

Nice talking with you man.

Bump up to the top. :D

Coming soon....
http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/TRD60D10RT-shortened-one.jpg

Nice talking with you man.

Bump up to the top. :D

Thanks for the help. This new project should be really nice....

Good meeting of the minds today Nate! I got coil over tabs made up for the 80+ ford truss rather easy and should work perfect.

Good meeting of the minds today Nate! I got coil over tabs made up for the 80+ ford truss rather easy and should work perfect.

Mind sharing what you came up with? Im waiting on my rear truss to get here (friday) and Ill hopefully finish up the rear and move on to the front 80's D60. Just curious what you came up with for tabs.

Good meeting of the minds today Nate! I got coil over tabs made up for the 80+ ford truss rather easy and should work perfect.

Good to hear. I'd like to see it too. I'm up at 4 am designing stuff b/c of our first big monsoon storm of the season is keeping me up.

here's what I came up with. only thing is I have to redo the shock hoops cause the angle the C/O is on the tabs otherwise I think the angle is perfect for the natural rotation of travel it will have.

Cool, that's basically what I was going to design, I just hadn't gotten to it yet. So many projects :D

Thats pretty nice!! Are you able to get a front shot of that whole axle. And is that a full width 80's Ford??

full width 80 ford,yes and it will be blocked cause of the damn jack stand holding the heep up. i'll try though

Cool, that's basically what I was going to design, I just hadn't gotten to it yet. So many projects :D

you had mentioned it but I didn't want my C/O's mounted so high, But it's the only real logical place for them. I think i'm going to have to cut my hood now, oh well not much left of the YJ anyways so might as well.

you had mentioned it but I didn't want my C/O's mounted so high, But it's the only real logical place for them. I think i'm going to have to cut my hood now, oh well not much left of the YJ anyways so might as well.

Cut hoods look better anyways. :p

AVAILABLE FOR PREORDER!

SHORTENED DODGE DANA 60 FRONT RAM MOUNT AND TRUSS

http://artecindustries.3dcartstores.com/assets/images/truss/dana60/trd60d10rt-shortened-one.jpg (http://artecindustries.3dcartstores.com/Dana-60-Dodge-Front-Ram-Mount-Truss-SHORTENED_p_225.html)

For use with Dodge axles that have been shortened. Driver side tube should be 19" long or greater.

LINK (http://artecindustries.3dcartstores.com/Dana-60-Dodge-Front-Ram-Mount-Truss-SHORTENED_p_225.html)

INTRODUCTORY SALE - 20% OFF. $335.99

as requested sorry about the sun.

Cool, that's basically what I was going to design, I just hadn't gotten to it yet. So many projects :D

Got around to it. Haven't cut it yet but I figured I'd let you guys check it out. What do you think? It'll work on the 80s FORD and Dodge trusses.

http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/FORDcoilovertabs.jpg

Nice...I'll take a set when you get them cut

what if you took it all the way down and over to the upper portion of the C? any advantages/disavantages??

what if you took it all the way down and over to the upper portion of the C? any advantages/disavantages??

I had that thought, too.

fine nate you win! i'll take some of those too

what if you took it all the way down and over to the upper portion of the C? any advantages/disavantages??

The only reason I didn't is because there are a few different inner c's out there and that surface is in different locations. I know its not alot to ask someone to grind it to fit but I'd rather not deal with the few people that'll complain about it not fitting.

fine nate you win! i'll take some of those too

My bad. My two week quote on designing all this stuff suddenly turned into a couple days with a sudden influx of requests. I should be wrapping up some other brackets in the next day or two. I'll post them up when they're done.

Just sent that other info, Nate. Let me know what else I can do.

TJ hotness coming, guys. Want to swap a D60 into your TJ? We're working on a kit with Nate, including hydro, arms and a truss system that will mount the suspension links as clean as all get out.

Just sent that other info, Nate. Let me know what else I can do.

TJ hotness coming, guys. Want to swap a D60 into your TJ? We're working on a kit with Nate, including hydro, arms and a truss system that will mount the suspension links as clean as all get out.

Thanks a bunch. If you can talk to your shock connection about what we discussed, I could use it in my designs. If you can also get me some frame dimensions for the front right over the truss, i can make even more brackets.

Good stuff coming, I can't wait to get back to work tomorrow!

Thanks a bunch. If you can talk to your shock connection about what we discussed, I could use it in my designs. If you can also get me some frame dimensions for the front right over the truss, i can make even more brackets.

Good stuff coming, I can't wait to get back to work tomorrow!

Let's talk tomorrow, but not a problem. I responded to your PM as well.

Pan hard bar bracket for the 80' D60 first!!! Whatcha got brew man!

Pan hard bar bracket for the 80' D60 first!!! Whatcha got brew man!

It's funny that you say that.

Why's that? I can't picture what to do for one cause I don't have my highsteers to align the steering and check clearances and kinda crunched for time. I'm stretching a CJ5 and just got my foot in the door to fab stuff for abunch of H1's.

i would be IN for that as well.

Wait for Nate to wake up ;).

stay tuned....I'm working on something :grinpimp:

ordered the highsteer stuff today:smokin:

Ok, here's what I came up with. I'll have put a few parts in the assembly to check all clearances but this should work great. The ORI's are at full compression. There will be about a minutes worth of grinding on the ram mount to fit this. What do you think?

http://artecindustries.3dcartstores.com/assets/images/LinkBrackets/truss-panhard2.jpghttp://artecindustries.3dcartstores.com/assets/images/LinkBrackets/truss-panhard1.jpg

Nate can you pm me a price on this setup so maybe you can get it out with my current order? :D

Oh yeah, lots of room. I'll get prices up as soon as we get them cut. In addition, I'll also have the 80's Ford coilover tabs (which will work for the dodge truss) and Lower link brackets for the 80's Fords up soon. They should make life alot easier for you guys.

http://artecindustries.3dcartstores.com/assets/images/LinkBrackets/truss-panhard3.jpg

Oh BTW....TRUSS SALE ENDS TONIGHT! ORDER NOW.

Looks like I pictured in my head when we were talking. Perfect.

See what I mean about your market? :D

Oh yeah, lots of room. I'll get prices up as soon as we get them cut. In addition, I'll also have the 80's Ford coilover tabs (which will work for the dodge truss) and Lower link brackets for the 80's Fords up soon. They should make life alot easier for you guys.

http://artecindustries.3dcartstores.com/assets/images/LinkBrackets/truss-panhard3.jpg

It's a beauty Grendel and Artec- Wow. Really nice guys!

Upon request we've extended the truss sale and added some more sale items for the....

INDEPENDENCE SALE
15% off on Battery Mounts, Quart Crates, Trusses & Fabrication Parts
Discount shown in cart. Excludes Kits, and items on introductory sale.

Ends Tuesday, July 5th

Ok, the coilover tabs for the Ford 85-91.5 trusses and Dodge trusses are up for sale on the website. More products to follow later in the day.

http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/FORDcoilovertabs.jpg (http://artecindustries.3dcartstores.com//Coilover-Tabs-for-D60-Front-Truss_p_181.html)

Added the panhard mount for the 85-91.5 trusses last night.
http://artecindustries.3dcartstores.com/assets/images/linkbrackets/panhardbracket.jpg (http://artecindustries.3dcartstores.com/Panhard-Mount-for-D60-Ford-Truss_p_228.html)

LINK (http://artecindustries.3dcartstores.com/Panhard-Mount-for-D60-Ford-Truss_p_228.html)

I have a ford 60. I'm pretty sure it was a 78-79 but I will have to do some measuring to make sure. It was narrowed 2" on the pass (long) side. Can you make a truss with ram and coilover mounts if I gave you some measurements? Or could I modify a full width truss to fit very easily? I don't mind some grinding and cutting. Your trusses look very clean and It would save me a bunch of time to buy one vs build it myself. Next question. I have stock gm kp knuckles on this axle. Will your high steer arms work with them or do they only fit Reid knucles? What is the most backspacing they will work with. Sorry for all the questions or if this has been covered. I have the CC ready to pull the trigger on this and a rear 14 bolt truss. You are makeing some nice stuff keep it up.

I have a ford 60. I'm pretty sure it was a 78-79 but I will have to do some measuring to make sure. It was narrowed 2" on the pass (long) side. Can you make a truss with ram and coilover mounts if I gave you some measurements? Or could I modify a full width truss to fit very easily? I don't mind some grinding and cutting. Your trusses look very clean and It would save me a bunch of time to buy one vs build it myself. Next question. I have stock gm kp knuckles on this axle. Will your high steer arms work with them or do they only fit Reid knucles? What is the most backspacing they will work with. Sorry for all the questions or if this has been covered. I have the CC ready to pull the trigger on this and a rear 14 bolt truss. You are makeing some nice stuff keep it up.

I'm working on making NARROWED versions of all our front trusses since we have so many requests. It'll be probably a month though before I get to the 78-79 but if it has only 3 inches of driver side tube, that's the other axle and I'll have that one finished next week. Modifying won't really work because everything is full length and centered to function correctly but I'm sure some have tried, I just haven't seen any.

The high steer arms work on any dana 60 knuckle not just reid. They are confirmed fit on a 17" rim with 4.75 backspacing.

Thanks for the compliment.:)

I'm working on making NARROWED versions of all our front trusses since we have so many requests. It'll be probably a month though before I get to the 78-79 but if it has only 3 inches of driver side tube, that's the other axle and I'll have that one finished next week. Modifying won't really work because everything is full length and centered to function correctly but I'm sure some have tried, I just haven't seen any.

The high steer arms work on any dana 60 knuckle not just reid. They are confirmed fit on a 17" rim with 4.75 backspacing.

Thanks for the compliment.:)


I just measured and it is 3" tube. The pass side is 22 3/8. I was told by the previous owner it was narrowed 2" on the pass side. Does that sound like it will work with the truss you are working on? I hope cause I kinda got my heart set on a pair of these. Pm me if you don't want to clutter up your thread. Thanks.

I just measured and it is 3" tube. The pass side is 22 3/8. I was told by the previous owner it was narrowed 2" on the pass side. Does that sound like it will work with the truss you are working on? I hope cause I kinda got my heart set on a pair of these. Pm me if you don't want to clutter up your thread. Thanks.

Yes, the narrowed versions will allow down to about 19" long tubes. You and a bunch of others are waiting so its good to let everyone know.

Yes, the narrowed versions will allow down to about 19" long tubes. You and a bunch of others are waiting so its good to let everyone know.

Cool. Will the ram still be able to be centered since this truss will be for axles with somewhat varying longside tubes? When do you think they'll be ready? Thanks!!

Cool. Will the ram still be able to be centered since this truss will be for axles with somewhat varying longside tubes? When do you think they'll be ready? Thanks!!

Yes, the narrowed version will allow the ram to be centered although the mount wouldn't be on an axle such as yours. The Dodge version we have out is the same way and basically the mirror image of the Ford one coming out. You have about 4-5 inches of adjustability side-to-side to center the ram.

Yes, the narrowed version will allow the ram to be centered although the mount wouldn't be on an axle such as yours. The Dodge version we have out is the same way and basically the mirror image of the Ford one coming out. You have about 4-5 inches of adjustability side-to-side to center the ram.

Cool. Post up when they're ready and I will get them ordered. Thanks

FYI to all. WE'LL BE CLOSED WED-FRI and resuming shipments on Monday. Almost all the pending orders shipped today except some brand new ones and most of those are for the new fuel cell brackets. The webstore however is open 24/7

FYI to all. WE'LL BE CLOSED WED-FRI and resuming shipments on Monday. Almost all the pending orders shipped today except some brand new ones and most of those are for the new fuel cell brackets. The webstore however is open 24/7

Hope you are all out having some fun... good to recharge once in a while.

Hope you are all out having some fun... good to recharge once in a while.

Thanks, we did have a good time. The first pic is of me in front of the second biggest falls, Havasu falls. The huge amount of mist really blurred the photo. The second is of Mooney falls, its huge and I swam behind it. It was really intense back there.

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/270624_2126544795740_1009507843_2414260_6613071_n. jpghttp://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/267791_2126549155849_1009507843_2414285_2438925_n. jpg

Now its back to work and finishing up some really cool projects.

Back to the grind...Ford 85-91.5 NARROWED truss and Ram mount coming up.

Almost done with the NARROWED 85-91.5 Ford Dana 60 Ram mount and Truss. Just gotta cut it and bend it now

http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/ford-truss-draw-kit1.jpg

Almost done with the NARROWED 85-91.5 Ford Dana 60 Ram mount and Truss. Just gotta cut it and bend it now

http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/ford-truss-draw-kit1.jpg


Rocking, now send me one! :flipoff2:


What else did you need measurements of?

Almost done with the NARROWED 85-91.5 Ford Dana 60 Ram mount and Truss. Just gotta cut it and bend it now

Is this made to fit the stated years narrowed down 2.12" on the long side (79 ford long side width)? If so I am interested. I have a 86 narrowed to use a 79 long side shaft and this would be ideal!

artec,

any word on a 79 ford truss panhard mount....the idea of my front 4-link is crashing and its looking more like we are going 3

Andrew, I'm working on it. sorry its taking so long, I just have a very full plate. PM me if you need something particular to fit your situation.

artec,

any word on a 79 ford truss panhard mount....the idea of my front 4-link is crashing and its looking more like we are going 3

x2 I'm very interested in a panhard bar bracket as well.
Any plans for a narrowed 78-79 truss?

I've mentioned it on your facebook forum, but I'll throw it out here too:

Make a front truss for the 99-2004 Ford F350 Dana 60s, with the ball joint/ unit bearing knuckles...

I'd buy one today.

Is this made to fit the stated years narrowed down 2.12" on the long side (79 ford long side width)? If so I am interested. I have a 86 narrowed to use a 79 long side shaft and this would be ideal! The short answer is yes it will work. The long answer is this is made to work with the long tube being all the way down to 19.188" long. The 79 long tube is about 22.25 long. The ram mount and truss are centered on the axle with 19.188" long tube. When you have a longer tube the ram mount and truss will no longer be centered but offset to one side. We've designed this however to allow the ram itself to shift over a few inches to allow it to be centered between the ends. You'll have about 3 inches of bare tube on the pass side. That said, the coilover mounts and the panhard mounts won't be in their intended location so they won't work. A set of standard tabs could replace the truss tabs and I'm working on the standard panhard mount that'll mount to tube.

x2 I'm very interested in a panhard bar bracket as well.
Any plans for a narrowed 78-79 truss?

Plans, yes. Though I won't have something for quite a while. I've been pushing back some other requested trusses back for a while now to offer the many variations of the dana 60 trusses so I need to fulfill those promises before developing another version of the d60 front. these narrowed versions actually take a while to develop despite just being modifications of the full width versions mainly because it has to accomodate so many different shortened lengths.

I've mentioned it on your facebook forum, but I'll throw it out here too:

Make a front truss for the 99-2004 Ford F350 Dana 60s, with the ball joint/ unit bearing knuckles...

I'd buy one today.
On my list though I won't have it today:D

Thanks for the reply here and in TOTM thread. You will have a pm tomorrow with
measurements

No problem, I'll be happy to help find a solution for you. What vehicle is this going on?

On another note, the shortened 80s ford truss and ram mount prototype will be on its way tomorrow for final fitment. Once we hear final word on its fit, we'll put it up on the website.

I don't ever want to weld again! man that's alot of welding on that D60 truss! but boy does it look sharp! thanks nate:smokin:

What will be the over all dimensions of the shorten version of the 78 -79 truss? vs the one you offer now?

nate do you have an exploded view of the 2 little pieces one seems to mount on the driverside and the other kind of follows the lines of the 3 big pieces that support the ram mount but have no clue where it goes?

No problem, I'll be happy to help find a solution for you. What vehicle is this going on?

On another note, the shortened 80s ford truss and ram mount prototype will be on its way tomorrow for final fitment. Once we hear final word on its fit, we'll put it up on the website.

06 Rubicon LJ....110" wb, 23" belly, 42s PBR's and currently open to sponsorship opps

nate do you have an exploded view of the 2 little pieces one seems to mount on the driverside and the other kind of follows the lines of the 3 big pieces that support the ram mount but have no clue where it goes?

I get questions on that one alot. So the other gusset that has the axle tube radius cutout goes on the opposite end of the pumpkin on the ram mount. It basically forms a little box with the bottom and side of the ram mount on the end. The pointy gusset that looks like the end of the bigger gussets is optional and designed to be trimmed according to your needs. It can be cut and welded to the diff cover and butted up against the removeable skid plate to act as an additional brace. Its not totally necessary but we include it for good measure.

Now that its burned in, lets see some pics.

Optional huh well it's gonna hang on the wall then! I have alittle more welding to do then I'll snap a few,also have to mount the ram. Trying to do it all outfrom under the rig makes everything easier!

I was going to get pics of the new truss and ram mount today but ended up sitting under a TJ all day doing some more R&D. I guess I'll have to get the new stuff up tomorrow.

Any update on the 98-02 Dodge Dana 60?

Sent a pm about the narrowed 86 ford truss. Let me know what you think. Thanks!

Any update on the 98-02 Dodge Dana 60?

Nothing to report at this time. These take alot of time to develop so I'm going with what has shown to be the most requested. It's on my list but I don't have a projected eta.

...Must stop surfing pirate and get back to work:)

Disregard my custom brake fluid/power steering fluid catch cans....

http://i707.photobucket.com/albums/ww74/daviskj/P1010531.jpg

http://i707.photobucket.com/albums/ww74/daviskj/P1010532.jpg

Got your PM Nate. Your inbox is full. So I will shoot you a PM in a few weeks to see where your at. Thanks

Josh

Is there any possible way I could get just the shortened dana 60 dodge truss without the steeing mount?

Thanks,

Chad

Is there any possible way I could get just the shortened dana 60 dodge truss without the steeing mount?

Thanks,

Chad

Kinda backwards for me, shortened dodge but I only want the hydro mount portion. I already have a 3link and dont have room for the truss.

Is there any possible way I could get just the shortened dana 60 dodge truss without the steeing mount?

Thanks,

Chad

Kinda backwards for me, shortened dodge but I only want the hydro mount portion. I already have a 3link and dont have room for the truss.

Yes to both. I'll get them up on the website soon, just have to take some pictures.

We've had alot of requests for a full length Dodge d60 truss and ram mount lately. I'm working on some other projects right now but I'll get back to those once I'm finished. Should probably be a couple weeks.

In other news the shortened Ford 80s truss and ram mount is in transit for final fitment and installation. I should have it ready for sale by late next week.

How much for the truss on 91 ford Dana 60? Shipped to 94503

interested in ford version and a price . :) (http://www.tmart.com/Car-Thermometers/)

How much for the truss on 91 ford Dana 60? Shipped to 94503
PM sent

interested in ford version and a price

Which version: 78-79, or 85-91.5? Ram mount and truss or just truss? Zip code too please? I can get you a price or if you like you can look HERE (http://artecindustries.3dcartstores.com/Axle-Trusses_c_143.html) and type in pirate4x4 in the coupon field and get a shipping quote too. Don't forget, check out page 2 for all our trusses.

Originally Posted by dobber
Is there any possible way I could get just the shortened dana 60 dodge truss without the steeing mount?

Thanks,

Chad
---------------------------------------------------------------------------------

Quote:
Originally Posted by 94toytruck
Kinda backwards for me, shortened dodge but I only want the hydro mount portion. I already have a 3link and dont have room for the truss.

Yes to both. I'll get them up on the website soon, just have to take some pictures.
-----------------------------------------------------------------------------

Any updates on when this will be up on the site?

my axle is all ready for it

http://i91.photobucket.com/albums/k304/crawler_chad/Mobile%20Uploads/downsized_0730111415.jpg

Sorry for the delay. I've been wrapping up another project. I'll get it up as soon as I'm done taking pics of this other new product.

Dont' forget the pirate4x4 discount. Simply type pirate4x4 in the coupon code section and save 10%. It doesn't apply to ON SALE items but there are only a few of those.

Shortened Ford Housing. Perfect fit.

I know its not a dana 60 and its not super hardcore but I thought I'd share another cool truss we made, and the project that has been soaking up alot of my time. There are alot of non-hardcore TJ owners out there so we're excited to see how this one sells.
http://artecindustries.3dcartstores.com/assets/images/truss/88/88kit3.jpg

http://artecindustries.3dcartstores.com/TJ-88-Swap-Kit-with-Truss_p_233.html
http://www.pirate4x4.com/forum/showthread.php?t=999559

might not be hardcore but that is some sweet fab!

Thanks alot. It has received alot of attention these past few days so we are excited to see it take off. Next week, its going in a KOH TJ for some really good bashing.

Thanks for all the truss orders this week. I haven't checked the numbers but it looks like we had another record week with trusses leading the way and every order went out same day or next day with the exception of one that the customer knew about ahead of time.

Cut out a bunch of trusses today since last week left us a little low. Thanks for keeping us busy.

Today must be the DAY OF THE 78-79 TRUSSES because thats all I've been talking to customers on the phone about all day. Strange how it all happens at once. Thanks for the orders.

Another teaser but a real photo this time........coming soon!!
http://artecindustries.3dcartstores.com/assets/images/truss/Dana60/TRCRJP01RT-one.jpg

Any more updates on this? This will be perfect for the front of my ProMod comp rig! :smokin:

Any more updates on this? This will be perfect for the front of my ProMod comp rig! :smokin:

I will have more info soon once I get some feedback from our tester. What side is your differential on?

today must be the day of the 78-79 trusses because thats all i've been talking to customers on the phone about all day. Strange how it all happens at once. Thanks for the orders.


:d

I will have more info soon once I get some feedback from our tester. What side is your differential on?

driver's side with a 10" PSC ram

driver's side with a 10" PSC ram

What knuckles and high steer arms? How much tube on each side of the axle?

What knuckles and high steer arms? How much tube on each side of the axle?

I just sent you a PM with all my information. :smokin:

More of these are shipping today. Thanks for all the orders.

Working on mine,


14 bolt front with your 60 ram mount and truss,


Had to do very minimal trimming to make it work, most revolved around the larger OD of the axle tubes.

Ill be in touch to order the steering here pretty quick:grinpimp:

-Shawn Smith

is there any other installed pics of the truss and ram mount on a chevy 60? im trying to see how the truss clears the the cast in spring perch and what room is left on the back side for link mounts to see if my mount will work.

is there any other installed pics of the truss and ram mount on a chevy 60? im trying to see how the truss clears the the cast in spring perch and what room is left on the back side for link mounts to see if my mount will work.

The backside of the truss has plenty of room for link mounts. The vertical gusset face furthest back is .75" from axle centerline. At the most, you might trim the very tip of the upper portion of the radius on the lin mount to make it fit. As far as the Chevy cast perch, it just clears straight over it not trying to conform to the contours of the perch. I'll see if I can find some closeups.