|
Spacecwboy 03-15-2011, 07:09 PM ftoy leans to one side, always has, what are your thoughts? linked in the rear, leafs in front. leans to drivers side. Battery, propane tank, etc is all centered, but since i tend to ride alone a lot it tends to always lean to that side. im thinking either an AAL in the front d-side or letting out more on the rear air shocks. thoughts? Wilson 03-15-2011, 07:28 PM Spool or welded in the rear by chance? Spacecwboy 03-15-2011, 08:10 PM welded Jeep07 03-15-2011, 08:29 PM Spool or welded will do that. It's related to binding. Air pressure in the tires on the rear identical? It will probably always have some lean. I wouldn't change the suspension on 1 side versus the other for lean if things are equal when the drive train isn't bound up. chvyhs 03-15-2011, 08:38 PM Do you have a spacer on the front drivers side spring perch? I heard that the spring perch on the passenger side of the diff is about 3/8" higher than the drivers side perch. Wilson 03-15-2011, 08:43 PM Spool or welded will do that. It's related to binding. Air pressure in the tires on the rear identical? It will probably always have some lean. I wouldn't change the suspension on 1 side versus the other for lean if things are equal when the drive train isn't bound up. This, when I ran a spool in my truck, it never sat level when parked...ever Do you have a spacer on the front drivers side spring perch? I heard that the spring perch on the passenger side of the diff is about 3/8" higher than the drivers side perch. This is also true toyjeep 03-16-2011, 06:24 AM Do you have a spacer on the front drivers side spring perch? I heard that the spring perch on the passenger side of the diff is about 3/8" higher than the drivers side perch. I found this out on mine after I fought it for about 2 months. The perches are different heigts on the front axle. DRM 03-16-2011, 06:24 AM Yep - a linked rear with a welded/spooled diff will do that if things are even slighlty bound up... my 4runner used to do it too. Spacecwboy 03-16-2011, 07:57 AM ok, well i guess it will just have to lean then... i will look at the spring perch and ck on a spacer Ricks72ntx 03-16-2011, 06:40 PM ok, well i guess it will just have to lean then... i will look at the spring perch and ck on a spacer If its not welded in yet I got an extra one when I bought some stuff im not going to be using. Spacecwboy 03-16-2011, 08:15 PM yeah just let me know. think im going to do a firewall this weekend if things pan out Ricks72ntx 03-16-2011, 10:31 PM How about I bring mine over and we'll do mine too. Spacecwboy 03-17-2011, 09:53 AM let me find sheet metal and get an idea and we can get to work Ricks72ntx 03-17-2011, 11:46 AM If you really want to i'll run by acorn tomarrow and get me some sheet metal | |