Someone told me that there is a stock flat Toyota pitman arm for the J60 powersteering box, but i forget wich one it is.

Anyone know wich one i am looking for?

Get one from a J7. It's much flatter.

Originally posted by jbt
Get one from a J7. It's much flatter.

Will it fit the J6 steering box? And wich TRE's do you have to use with that arm? Will the stock 40 tre's fit or are the J7 tre's different?

Thanks for the advice

J7X pitman arm will have J60 style relay ends, a weird mix for 40 series so I would upgrade to 60/70 steering arms if you have 1979 or later knuckle arms. 60 stick out further and 70 may dive toward ground more on the arms. both are thicker than the 40 arms even the late ones.

have fun....

The J80 on is much flatter than a J60, Dieselcruiserhead! If you need one get ahold of me, Spunks got a couple kicking around.

Wrong diesel_cruiser head. :flipoff2:

Originally posted by dieselcruiserhead
Wrong diesel_cruiser head. :flipoff2: ]


Oops!!! :flipoff2:

Well if you do need one Dre', we have it....:D

Originally posted by bfautah
The J80 on is much flatter than a J60, Dieselcruiserhead! If you need one get ahold of me, Spunks got a couple kicking around.

Thanks for the offer, but since I live in Europe shipping would be $$$$$$$. I'll try and find one over here.

Thanks for the offer anyway!!

Originally posted by Diesel_Cruiser


Thanks for the offer, but since I live in Europe shipping would be $$$$$$$. I'll try and find one over here.

Thanks for the offer anyway!!

Despite it's not really my business :flipoff2: I would add that shipping is not necessarily $$$ for small parts via the regular US post. Shipping just a pitman arm would probably be below $10...

Just a thought...

Bye,

:flipoff2:

BITE ME

FJ/HJ75, and H/F ZJ75

versus stock 60 pitman

80 series pitman = same drop as 75 series

junkyards normally wont separate, but some do!