t18/d20 in a 78 cherokeee with a 360. the input shaft on the tt18 looks a little long(or at least the adapter from the bellhousing back does) what input shaft will i need, and what bellhousing/clutch/anything else mods will need to be done to run this combo in a cj(5 or 7)

you have to lose the adapter and input shaft and get a short shaft for it. Novak makes them. the t-18 will bolt up to a t-150 bellhousing if thats what you have.

You need the short shaft kit ($200) and the 150 bellhousing.

Call Mike. He has all the goodies in stock.

Partsmike.com