I'm totally clueless when it comes to wiring...Anyone have any sites that help with hard wiring up lights such as kc's or wiring a cb or scanner into a wrangler?

-ANdrew

No site. But its easy as hell to do. scanner and CB have 2 wires coming out of them. Red wire goes to positive. Black wire goes to ground. As for KC's. Each light has 2 wires. Black wire goes to a ground. Red wires are connected together and plugged into the accessory position in the switch. a wire from the battery goes to the positive position on the switchj and a ground is plugged into the last position on the switch if the switch has a light in it. Good luck

goto radio shack and buy a basic wiring book and read it.

Read why fuses and relays are good things.

they go buy a cheap voltmeter. I'd Buy one that has a "tone" setting for continuity testing.

Then practice hooking up a set of lights.

Then do the CB.

<IMG SRC="smilies/beer.gif" border="0">

- Dan

[ 09-26-2001: Message edited by: Dan-H ]