Hi!

Any reccomendations on places I can buy (or get <IMG SRC="smilies/wink.gif" border="0"> angle iron in Sac or the Bay ARea? I was looking for a few relatively small pieces to build a rocker guard and a winch mount, and the steel place here in Pleasanton was asking $80 for 10 gauge!!

The dimensions I am looking for are:
-rocker guards: 55X6X10 -55 long by 6 side by 10 side can be 10 gauge or thicker.

-winch mount 33X8X6 Needs to be thicker, probably 3/8's?

I really appreciate your help <IMG SRC="smilies/biggrin.gif" border="0">

Blue Collar Suplly in Sac On
Florin Perkin's

Adam, They Have the Best Deal's On Steel

Originally posted by Adam Ant:
<STRONG>Blue Collar Suplly in Sac On
Florin Perkin's

Adam, They Have the Best Deal's On Steel</STRONG>

Yup!!! <IMG SRC="smilies/smile.gif" border="0">

Sim's metal in San Jose sells surplus steel for .30/lb. It's kinds hit & miss though.

Down the street from my house is a scrap yard that'll probably have some.
They sell it by the pound <IMG SRC="smilies/biggrin.gif" border="0">
Might be a little weathered but an agro wire wheel takes care of that.

Sign up and do a search here
http://www.thomasregister.com/index.cgi

it will give some more places to go to. you should only pay .25 to .30 per lbs. atleast thats all i pay <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/wink.gif" border="0">

Hi Todd,

Thanks for the info! I would like to check it out. Do you know what the name of the place is, and who you normally talk with over there?

Thanks,

Gui
Originally posted by Just Plain Old Toad Now:
<STRONG>Down the street from my house is a scrap yard that'll probably have some.
They sell it by the pound <IMG SRC="smilies/biggrin.gif" border="0">
Might be a little weathered but an agro wire wheel takes care of that.</STRONG>

i wanna say it's called delta scrap but I'm not sure.

I can stop by this saturday maybe and see what they have.
I need to pick some stuff up for rockers as well.
If they have some and it's cheap I'll pick spome up for you.

I got my angle iron from C&C steel in Rancho for around $40 6x6x1/4" Did both sides of my YJ tub with a foot left over

Alling Iron or American Metals in West Sac.
Kimzey Welding in Woodland.
Kimzey did a full fab job on my winch plate, similar dimensions, cost me $60 out the door.

Alling Iron has a scrap bin that they sell cheaply, and every time I have been there, they had what I needed in the scrap.

gui - you're in pleasanton??