RLbronco
11-28-2002, 11:31 AM
im thinking about putting in a 4 link out back and swapping in some coils. you has done this and what coils from what vehicles work the best. im looking at 4-5 inches of lift. thanks a lot
|
RLbronco 11-28-2002, 11:31 AM im thinking about putting in a 4 link out back and swapping in some coils. you has done this and what coils from what vehicles work the best. im looking at 4-5 inches of lift. thanks a lot IronBenderII 11-28-2002, 01:09 PM Many have done this mod. I am in the process of doing it myself. I would say match the springs that you have in the front so that you have balanced flex. As for ride height, that is going to depend on where you put your spring perches and such. Also will depend on how much weight you have in the rear. Good luck! -Jack TDbronco 11-28-2002, 08:54 PM Try TJ front coils and use about a 4" piece of chain link fence post and weld it to 3"- 4" plate weld it to the axle if it is to low build it up. If that is not clear to you PM me and we can talk more | |