PDA

: D300 needle bearings - P/N ?

cmk
11-28-2002, 04:21 PM
Does anyone have a part number (preferably Timken) for the 50 or so needle bearings on the intermediate shaft of a d300 ?

I'm piecing together my own rebuild kit since no one carries a kit composed of the parts I have come to trust. I've crossed over all the bearings except the needles.

Anyone?

TIA

cm "rollin' rollin' rollin' " k
BillaVista
11-29-2002, 09:32 AM
Gimme the year / make / model the 300 came out of and I can tell you.

Also - don;t show "intermediate shaft" - would that be

front output, input, raer output, or shift shaft?
Charly
11-29-2002, 09:44 AM
Bill,

The intermediate shaft is the shaft that the doubled center gear (intermediate gear) rides on. It is neither front, rear, input or output.
Mechanos
11-29-2002, 11:26 AM
Originally posted by cmk
Does anyone have a part number (preferably Timken) for the 50 or so needle bearings on the intermediate shaft of a d300 ?

I'm piecing together my own rebuild kit since no one carries a kit composed of the parts I have come to trust. I've crossed over all the bearings except the needles.

Anyone?

TIA

cm "rollin' rollin' rollin' " k
I don't have the Timken number, but I have the BCA number: Q13367 BTW there are 48 of them in there....
BillaVista
11-29-2002, 12:10 PM
Charly,

OK, never had a 300 apart. But that means I have no listing in my SKF master catologue
cmk
11-29-2002, 07:51 PM
It's an '80 d300 with the 1.250" intermediate shaft.

Thanks TORC, I can work with that.

cm "ever have the feeling someone is following you .... Billa!" k :D
cmk
11-29-2002, 08:03 PM
P/N Q13367 appears to be a valid Timken part number as well.

cmk