Introducing the KORE Defender Chassis.

This 2 Seater Chassis was Designed to have ample supsension travel front & rear for the 'Go-Fast' Crowd.

Built Entirely from 1.75"x.120" DOM with 1.5" & 1.25" Bracing as need in certain areas.

The 2 Chassis Pictured Below have the optional fabricated side frame rails (+$1500).

Normal all round tube Chassis Price is set at $3000.....Comes with Front Winch Plate & Front Tow Points. The chassis can be built in either a 50" or 54" wide version.

Will fit a variety of drivetrains including the wider Stak Cases.

Please give us a call at the shop for more details & lead times.

Thanks!
-Kenneth

http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/DSC04729.jpg

http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/DSC04727.jpg

http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/DSC04720.jpg

http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/DSC04722.jpg

http://img.photobucket.com/albums/v705/00tjken/Customer%20Rigs/Kendall%20Huey/DSC04517.jpg

http://img.photobucket.com/albums/v705/00tjken/Customer%20Rigs/Kendall%20Huey/DSC04515.jpg

http://img.photobucket.com/albums/v705/00tjken/Customer%20Rigs/Kendall%20Huey/DSC04495.jpg

http://img.photobucket.com/albums/v705/00tjken/Customer%20Rigs/Kendall%20Huey/WFTW-Giveaway.jpg

Looks good!

Thanks for the props.

Here's some shots of how we strenghthened the optional fabricated rails with internal gussets....

http://img.photobucket.com/albums/v705/00tjken/Customer%20Rigs/Kendall%20Huey/DSC03777.jpg

http://img.photobucket.com/albums/v705/00tjken/Customer%20Rigs/Kendall%20Huey/DSC03772.jpg

Any pics of these as completed buggies?

Any pics of these as completed buggies?


We haven't received any pics from customers with them completed yet.

One got setup to Roller stage, but was stripped down & resold back to a guy here in Oklahoma. He'll be bringing it back to us to finish it out for him.

I'll have to email some of the other guys to see where they're at on their builds.

One was getting prepped for KOH '11 but he ran out of time.....He should be close by now

Thanks for all the inquiries...Quotes have been pm'd back!

Any luck with a pic of a roller or a completed chassis?

Whats the round about wheel base for on of these?

bump for you Kenneth - Give him a call or shoot him an email - he is very easy to work with and answered all my questions quickly

I'll post pics of a roller before long :D

Whats the round about wheel base for on of these?

54" Wide Chassis can be set around 108-114"

Just about done with this 54" Wide All Tube Version.

http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/DSC05227-cropped.gif

We should have some time to make some mockup panels for it before the owner picks it up.
I'll throw some of those pics up when I get them.


We're even considering making a few slight changes to this basic 54" Wide Chassis to allow a 3rd seat (PreTeen) to fit in the back. It would require loosing a little bit of the uptravel room in the back but shouldn't be much.

This Defender is ready to roll out....Who's next?

http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/DSC05240.gif

54" Wide Chassis can be set around 108-114"

Just about done with this 54" Wide All Tube Version.

http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/DSC05227-cropped.gif

We should have some time to make some mockup panels for it before the owner picks it up.
I'll throw some of those pics up when I get them.


We're even considering making a few slight changes to this basic 54" Wide Chassis to allow a 3rd seat (PreTeen) to fit in the back. It would require loosing a little bit of the uptravel room in the back but shouldn't be much.

I would like a quote for a chassis like this that will fit a 36" bench seat in the back.

Do you have the pictures of it with the mockup panels?

Thanks,
Seth

Bump for a quote.

I would like to pick one up around March next year. My CJ7 is catching hell trying to keep up with Blase and Beefy in their Rogue buggies.

Good talking with you Seth.

Email sent with everything we spoke about.

Who's next?

Bump for a quote.

I would like to pick one up around March next year. My CJ7 is catching hell trying to keep up with Blase and Beefy in their Rogue buggies.

What?!? Rig did great, but a new buggy would be even better!

I would like a quote for a chassis like this that will fit a 36" bench seat in the back.

Do you have the pictures of it with the mockup panels?

Thanks,
Seth

i would also like to know a quote for a chassis like this with a 36'' back seat

great job I really like this chassis love the all tube one

i would also like to know a quote for a chassis like this with a 36'' back seat
PM en route
great job I really like this chassis love the all tube one

Thanks!

Thanks for the props.

Here's some shots of how we strenghthened the optional fabricated rails with internal gussets....

http://img.photobucket.com/albums/v705/00tjken/Customer%20Rigs/Kendall%20Huey/DSC03777.jpg

http://img.photobucket.com/albums/v705/00tjken/Customer%20Rigs/Kendall%20Huey/DSC03772.jpg

Looks good Ken. So those rails have 90's and tubes welded inside. Does that save on weight, triangulation bracing, etc? Making your center of gravity lower?

Thanks for the props on our Defender Chassis.

The internal bracing was included to make those rails as tough as possible....with less chances of them getting deformed when they get smacked with a rock....We all know that's going to happen, right? :D

Here's some pics we received recently from the latest Defender Chassis Owner......He's made quite a bit of progress putting his together as a roller using our bracket kit....Which makes it very simple to setup the suspension as the chassis was designed with that in mind! :D



http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/faed6f35.jpg

http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/3cdd4d6e.jpg

http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/2011-11-05_16-44-28_345.jpg

http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/2011-11-05_16-44-43_787.jpg

http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/b920b58a.jpg

http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/1322441083.jpg

http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/1322441081.jpg

http://img.photobucket.com/albums/v705/00tjken/Defender%20Chassis/8f3de4ff.jpg

Just started on 2 of these Chassis'....1 is spoken for, so we'll have a 1 available if anyone is interested!

We'll have another Defender Chassis available soon.....Who wants to put their name on it? :D

Here's a pic of mine a lil further along. These chassis have a ton of room inside. super comfortable and safe. They also have plenty of room in the rear for storage, coolers, spare tire, etc.

Looking Great Daniel!

Sold another Defender Yesterday....Who's next?

Hey Kenneth, This is Mike Glad I got to meet you guys. My friend Brad (sprint 7h) cant waite to get his new defender chassis home to start work on it. Hope to see some pics soon.
Mike