|
rockinfive+2 12-01-2002, 04:12 PM Put the turbo 350 in this weekend clocked the 300 to the third hole and looks like the frt driveshaft wont work, Tranny pan in the way so dropped one more hole and still looks like it wont work. Anyone runnin this combo? Any help would be nice. P.S. 84 CJ 7 frame, 91 YJ tub, 383 chevy engine. rockinfive+2 12-01-2002, 05:13 PM Someone has to be runnin this combo patooyee 12-01-2002, 07:07 PM I'm running that with a 203 doubler in between and having a similar problem. Check my thread about driveshafts. Don't know if it helps. J. J. rockinfive+2 12-01-2002, 07:23 PM Read your thread and helped a little anyone else havin this prob Robotoy 12-01-2002, 08:30 PM i am running this combo in my toyota truck. i used the chevy NP208 adapter to mate mine together. i was having problems at first with the front shaft hitting the pan. i built a new front shaft out of smaller heavy wall tubing/pipe. haven't had a problem since. the transfer case is clocked up so i can run a flat plate on the bottom of the truck. rhyn rockinfive+2 12-01-2002, 11:02 PM Might go that way what size of tubing you use for the shaft | |