|
white_elephant 07-09-2011, 01:28 PM I'm fixing my grand mothers trooper (1993 v6) and the belt for the power steering pump went bad, while replacing it I notice the pump wasn't straight so I checked and the bracket that holds it is broken Anyone knows where I could get that bracket?? Someone told me it goes with the whole front of engine I BigSwede 07-10-2011, 12:24 PM Hmmm, dunno. I'm gonna have to look that one up in the shop manual, when I get home... soflmuddin 07-10-2011, 12:31 PM gm has this crappy setup. if there is enough room just weld it. stacey12345 07-10-2011, 09:54 PM i agree with soflmudin just weld it but id say plate it aswell dont need an alt flying around under the hood chadzu 07-14-2011, 01:53 AM the ps pump on the 3.2 trooper does have a bracket that bolts to the motor. I would think that a quick trip to the pick and pull would be all that is required to get it fixed. It shouldn't be that big of a deal to replace the bracket and get granny back on the trail. There is a lot of isuzus showing up at the pick and pull yards in my area, so now would be a good time to grab what you need. | |