Wagoneer Axle Garage Sale; Eastern Nebraska - Pirate4x4.Com : 4x4 and Off-Road Forum

rustywagoneersdotcom · 12-08-2011, 03:56 PM

I have a very large quantity of Wagoneer / Cherokee / J-truck axles that I am going to thin out a little bit.

I have passenger and driver drop fronts. All disk brake D44's. Some with flat-top knuckles, some without. Wide and Narrow track.

I have one or two disconnect-type units; only good as parts for keeping another one going, frankly - but where else are you going to get those parts these days? I've got 'em. Fronts will range from 150.00 (disconnect axle, in as-is condiiton) to 300.00 (mix-and-match, like putting some flat-tops on a driver-drop unit). I can also drill and tap flat-top knuckles.

Wide and Narrow rears, D44's, and M23's. I would be willing to part an axle under the right circumstances (like, so a guy using an M23 could have spare shafts; or so a guy could buy one complete M23 and get spare shafts with it).

Rears will start at 100 bucks for an offset D44, up to 250 bucks for my one remaining centered, narrow-track D44 rear.

All the stuff is in Snyder, Nebraska. I would meet a buyer halfway, with some consideration for fuel, if a reasonable spot could be picked. I would put axles on a pallet and drop them at a shipping depot in Omaha; however, getting the shipper, and the quote are entirely on you - also, I work 4x10's, so I would drop the pallet in Omaha on a Friday.

Thanks in advance
Dave
402-719- six 8 two 6

85lockdtoy · 12-08-2011, 11:25 PM

damn to far......would of grabbed one of these for a buddy....

The Donzi · 12-09-2011, 07:18 AM

Can I get a quote for a set of D44's for a Cherokee wide track with flat top knuckle front drilled and tapped with a good set of brakes?

RCL · 12-09-2011, 12:45 PM

Price please on a D44 front with passenger drop and flat top knuckles drilled and tapped.
I am in Oklahoma and travel N. Kansas and Missouri regularly.

rustywagoneersdotcom · 12-12-2011, 05:00 AM

Quote:

Originally Posted by RCL

Price please on a D44 front with passenger drop and flat top knuckles drilled and tapped.
I am in Oklahoma and travel N. Kansas and Missouri regularly.

PM sent, thanks.

rustywagoneersdotcom · 12-12-2011, 05:07 AM

Quote:

Originally Posted by The Donzi

Can I get a quote for a set of D44's for a Cherokee wide track with flat top knuckle front drilled and tapped with a good set of brakes?

PM sent, thanks.

BassnTruck · 12-21-2011, 02:58 PM

You have a stock front and rear driveshaft? Drivers drop disco 44 and 20 rear if that matters.

rustywagoneersdotcom · 12-22-2011, 06:02 AM

Quote:

Originally Posted by BassnTruck

You have a stock front and rear driveshaft? Drivers drop disco 44 and 20 rear if that matters.

I am sure I do. I actually have a truck spec’ed exactly like that which I need to disassemble soon. Due to the disco front, I am assuming you had an NP228 or NP229 transfer case? Only reason I ask is that NP208’s are a little shorter, which makes the rear driveshaft a little longer.

rustywagoneersdotcom · 12-22-2011, 01:49 PM

Still have several Wide Track pass drop fronts. Also several narrow track pass and driver drop fronts.

redheep · 12-23-2011, 05:34 AM

Do you have any spare shafts around?

I'm looking for a pair of waggy outers.

ghiradelli777 · 12-27-2011, 01:20 PM

any waggy front springs?

rustywagoneersdotcom · 12-27-2011, 01:31 PM

Quote:

Originally Posted by redheep

Do you have any spare shafts around?

I'm looking for a pair of waggy outers.

PM on the way.

rustywagoneersdotcom · 12-27-2011, 01:33 PM

Quote:

Originally Posted by ghiradelli777

any waggy front springs?

PM on the way to you also.

BrandonCrawford · 12-27-2011, 04:04 PM

Do you have any drivers drop non disco fronts left?

rustywagoneersdotcom · 12-28-2011, 05:50 AM

Quote:

Originally Posted by BrandonCrawford

Do you have any drivers drop non disco fronts left?

Yes sir.

rustywagoneersdotcom · 12-30-2011, 03:44 PM

Quote:

Originally Posted by rustywagoneersdotcom

Still have several Wide Track pass drop fronts. Also several narrow track pass and driver drop fronts.

Bump for the weekend.

phil240 · 12-30-2011, 04:57 PM

I need one spindle if you got an extra,mines a 88 waggy front

Cumminshunter · 01-05-2012, 04:11 PM

Got any waggy front springs?

Thanks

cdub0451 · 01-12-2012, 08:40 PM

Do you have any of the little stub axle shafts that goes in the carrier for the 83-84 disconnect D44's? If so I'd like to get a price.

rustywagoneersdotcom · 01-17-2012, 06:18 AM

Quote:

Originally Posted by cdub0451

Do you have any of the little stub axle shafts that goes in the carrier for the 83-84 disconnect D44's? If so I'd like to get a price.

I know I have one axle that hasn't been opened up yet. I will have to think about the price, since i would have to turn a 'usable' axle into a parts axle if I take it apart... Gotta think about that one.

remko12 · 01-17-2012, 06:38 AM

How much would you sell and ship (to 77494) some drilled and tapped flat-top knuckles for the 44?

cdub0451 · 01-17-2012, 05:51 PM

Quote:

Originally Posted by rustywagoneersdotcom

I know I have one axle that hasn't been opened up yet. I will have to think about the price, since i would have to turn a 'usable' axle into a parts axle if I take it apart... Gotta think about that one.

I understand. If you decide to part it out, put me on top of your list.

OC IH · 01-22-2012, 10:03 PM

Quote:

Originally Posted by remko12

How much would you sell and ship (to 77494) some drilled and tapped flat-top knuckles for the 44?

Same question but shipped to 92821.

rustywagoneersdotcom · 02-02-2012, 03:35 PM

Quote:

Originally Posted by OC IH

Same question but shipped to 92821.

I don't want to 'break' any axles to just sell knuckles yet, but I will consider it.

DrillANWR · 02-03-2012, 06:35 AM

Have a group of guys here interested in a package deal. Front axles 3 driver, 3 passenger drop. I would probably freakin drive across the country to get them. So anybody else east of Nebraska, close to 80, let me know if you need delivery?
Back to the axles. What kind of price could you work for us?

12-08-2011, 03:56 PM	#1 (permalink)
rustywagoneersdotcom Archimedean Join Date: Jan 2006 Member # 65100 Location: Dodge, NE Posts: 4,934	Wagoneer Axle Garage Sale; Eastern Nebraska I have a very large quantity of Wagoneer / Cherokee / J-truck axles that I am going to thin out a little bit. I have passenger and driver drop fronts. All disk brake D44's. Some with flat-top knuckles, some without. Wide and Narrow track. I have one or two disconnect-type units; only good as parts for keeping another one going, frankly - but where else are you going to get those parts these days? I've got 'em. Fronts will range from 150.00 (disconnect axle, in as-is condiiton) to 300.00 (mix-and-match, like putting some flat-tops on a driver-drop unit). I can also drill and tap flat-top knuckles. Wide and Narrow rears, D44's, and M23's. I would be willing to part an axle under the right circumstances (like, so a guy using an M23 could have spare shafts; or so a guy could buy one complete M23 and get spare shafts with it). Rears will start at 100 bucks for an offset D44, up to 250 bucks for my one remaining centered, narrow-track D44 rear. All the stuff is in Snyder, Nebraska. I would meet a buyer halfway, with some consideration for fuel, if a reasonable spot could be picked. I would put axles on a pallet and drop them at a shipping depot in Omaha; however, getting the shipper, and the quote are entirely on you - also, I work 4x10's, so I would drop the pallet in Omaha on a Friday. Thanks in advance Dave 402-719- six 8 two 6 __________________ Someone sort of local sell me a Dodge NP435, or the mainshaft/tailhousing from one. Or, sell me a Ford NP208 input gear...

12-08-2011, 11:25 PM	#2 (permalink)
85lockdtoy Registered User Join Date: Dec 2003 Member # 24852 Location: Nor cal Posts: 323	damn to far......would of grabbed one of these for a buddy.... __________________ :flipoff2:

12-22-2011, 01:49 PM	#9 (permalink)
rustywagoneersdotcom Archimedean Join Date: Jan 2006 Member # 65100 Location: Dodge, NE Posts: 4,934	Still have several Wide Track pass drop fronts. Also several narrow track pass and driver drop fronts. __________________ Someone sort of local sell me a Dodge NP435, or the mainshaft/tailhousing from one. Or, sell me a Ford NP208 input gear...

12-23-2011, 05:34 AM	#10 (permalink)
redheep Wheeler Join Date: Aug 2008 Member # 118558 Location: Richlands, NC Posts: 238	Do you have any spare shafts around? I'm looking for a pair of waggy outers. __________________ '96 XJ D44/D60, Clayton LA 6.5" 35's

12-27-2011, 01:20 PM	#11 (permalink)
ghiradelli777 Granite Guru Join Date: Feb 2007 Member # 87335 Location: Indianapolis, IN Posts: 532	any waggy front springs? __________________ 92 YJ-Stretched w/ H1 beadlocks 4.3/4l60e/d300 twinstick 60/14 5.13 gears

12-09-2011, 07:18 AM	#3 (permalink)
The Donzi Wheeler Join Date: Feb 2003 Member # 16989 Location: Miami Posts: 201	Can I get a quote for a set of D44's for a Cherokee wide track with flat top knuckle front drilled and tapped with a good set of brakes?

12-09-2011, 12:45 PM	#4 (permalink)
RCL Wheeler Join Date: Dec 2010 Member # 175677 Location: Oklahoma Posts: 162	Price please on a D44 front with passenger drop and flat top knuckles drilled and tapped. I am in Oklahoma and travel N. Kansas and Missouri regularly.

12-21-2011, 02:58 PM	#7 (permalink)
BassnTruck Registered User Join Date: Feb 2007 Member # 86582 Location: KS Posts: 425	You have a stock front and rear driveshaft? Drivers drop disco 44 and 20 rear if that matters.

12-27-2011, 04:04 PM	#14 (permalink)
BrandonCrawford Registered User Join Date: Oct 2011 Member # 201257 Location: Frederick MD Posts: 30	Do you have any drivers drop non disco fronts left?

12-30-2011, 04:57 PM	#17 (permalink)
phil240 Registered User Join Date: Aug 2010 Member # 167058 Posts: 20	I need one spindle if you got an extra,mines a 88 waggy front

01-05-2012, 04:11 PM	#18 (permalink)
Cumminshunter Registered User Join Date: Jun 2011 Member # 192169 Location: Highlands Ranch, CO Posts: 269	Got any waggy front springs? Thanks __________________ 93 YJ Build: Search "Black & Tan 2 Black & Blue" in Non-Hardcore...

01-12-2012, 08:40 PM	#19 (permalink)
cdub0451 Not Wenzel Join Date: Oct 2006 Member # 80165 Location: LBC Posts: 397	Do you have any of the little stub axle shafts that goes in the carrier for the 83-84 disconnect D44's? If so I'd like to get a price. __________________ No Further Entries

01-17-2012, 06:38 AM	#21 (permalink)
remko12 Registered User Join Date: May 2009 Member # 136063 Location: Katy, TX Posts: 23	How much would you sell and ship (to 77494) some drilled and tapped flat-top knuckles for the 44?

02-03-2012, 06:35 AM	#25 (permalink)
DrillANWR Wheeler Join Date: Mar 2011 Member # 185422 Location: lancaster, PA Posts: 206	axles.. with an s Have a group of guys here interested in a package deal. Front axles 3 driver, 3 passenger drop. I would probably freakin drive across the country to get them. So anybody else east of Nebraska, close to 80, let me know if you need delivery? Back to the axles. What kind of price could you work for us? __________________ If you voted for Obama in 2008 to prove that you're not a RACIST... vote for someone else in 2012 to prove that you're not an IDIOT!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode