30 Spline Longfield Super Set The Strongest Front Axles For Toyota's Ever! - Pirate4x4.Com : 4x4 and Off-Road Forum

Longfield · 07-17-2004, 07:33 PM

No these are not a birfield eliminator kit. These are stonger and affordable.

We have went as far as we can go with the birfield material we are currently using today.

It's become obvious that we need more strength in a Toyota front axle now that they are coming out with transfer cases that allows you to do front wheel digs in competition, hard core trails and larger tires.

1- This Longfield is made from 4340 chromoly. The bell is longer for added
strength.

2- The inner race and cage is a completely different and stronger design
that is patented. It is made from 300M and also made longer for
added strength. The new design is much stronger at full turn.

3- The balls are smaller to give the bell and inner race added thickness.

4- The inner axle is also made from 4340 chromoly. It is now 30 splines at
both ends. We also eliminated the big snap ring groove. No martack
need, these inners will come with the c-clip in place on the very end of
the axle that snaps into the Longfield. This c-clip snaps inside the race
to prevent the inner axle from sliding either direction.

5- If you noticed this new Longfield is designed to increase your turning
radius by tapering the Longfield on the inside of the bell. So the inner
axle does not come in contact with the bell and bind. These
Longfields will turn up to 38 degrees.

6- All these parts are properly heat treated and cryogenically processed
from the supplier to assure us of wearability and added strength.

This 30 Spline Super Set will sell for a low price of $635.00 for all 4 pieces delivered right to your door.

We currently have 6 prototypes being tested now. They will be available for sale in about 4-6 weeks.

For tech questions call BOBBY LONG 253-847-8254

DiscoDino · 07-18-2004, 02:56 AM

Bobby,
Cool stuff - will you have any of these CVs to work with the 27 spline original sized axles?
Nadim

blacktoy · 07-18-2004, 03:24 AM

How about some custom length inners?

Longfield · 07-18-2004, 07:46 AM

Yes we are doing chromoly 27 spline, they will sell for about $225.00ea. 4 to 6 weeks.

Sorry we are not doing custom inners. you might check with PIG.

SR5Dave · 07-18-2004, 08:10 AM

Thanks for stepping up toyota axles once again!!!

Bill Collins · 07-18-2004, 09:26 AM

i waited for as long as i could,so i ordered some longs last week.and now you come out with these

also terra said that the inners were on back order,have they come in yet?thanks for improving...

Longfield · 07-18-2004, 09:40 AM

Yes they came in friday evening. If your name is on Terras list she will call you monday.Or you can call her, sorry for the wait.

Kajo4x4toy · 07-18-2004, 09:50 AM

That is awesome. I can't wait to hear how well prototypes are doing. When my original Longfields break I will probably by a set.

Bill Collins · 07-18-2004, 10:08 AM

Quote:

Originally Posted by Longfield

Yes they came in friday evening. If your name is on Terras list she will call you monday.Or you can call her, sorry for the wait.

waiting was no problem,thanks...

Ben Holloway · 07-18-2004, 12:45 PM

i heard you talking about these or i thought it was these in goldendale, was wondering how long it was gonna be, nice work

Ben

CronusTRD · 07-18-2004, 02:47 PM

What would one additional birf cost if we wanted a spare....for "just in case"?

vikingsven · 07-18-2004, 03:00 PM

O Baby! those are nice! Daddy Like!

LCOwner · 07-18-2004, 04:51 PM

Will they be available for the FJ60/2 (17-1/4" short side)and FJ40 (29-1/8"long side)?

Longfield · 07-18-2004, 05:51 PM

Quote:

Originally Posted by LCOwner

Will they be available for the FJ60/2 (17-1/4" short side)and FJ40 (29-1/8"long side)?

\

YES THEY WILL BE AVAILABLE FOR ALL FJ M.

SORRY NO FJ80S

Foxfab · 07-18-2004, 06:36 PM

Are the splines rolled or cut?

SlamChops · 07-18-2004, 07:04 PM

Those look SUPER beefy. Whenever I have to step up to chromo inners, I'll definitely be calling you.

SeaBass44 · 07-18-2004, 11:54 PM

woody · 07-19-2004, 06:17 AM

VERY nice...I almost look forward to breaking what I've got installed now!

Xjeepman · 07-19-2004, 06:43 AM

Just wondering if these will withstand daily use with out the excellerated wear associated with the softer predecessors if so then finally the best of both worlds

vikingsven · 07-19-2004, 08:06 AM

Quote:

Originally Posted by Foxfab

Are the splines rolled or cut?

Good question?

yarddog · 07-19-2004, 08:23 AM

Nice!

How many pounds do they take to break on your machine vs the 27 spline?

Longfield · 07-19-2004, 09:13 AM

Quote:

Originally Posted by Foxfab

Are the splines rolled or cut?

YES THE SPLINES ARE ROLLD

Overlord · 07-19-2004, 09:52 AM

Quote:

Originally Posted by Xjeepman

Just wondering if these will withstand daily use with out the excellerated wear associated with the softer predecessors if so then finally the best of both worlds

I would like to know too. Living in Alaska, my hubs stay locked in for 6 months, so accelerated wear is an issue for me.

desertoy · 07-19-2004, 09:52 AM

Look for install pictures and commentary soon. We will be installing a set in the Longfield sponsored Formula Toy next weekend

. First comp, Donners Ski ranch next month.

JamisonWorkshop · 07-19-2004, 10:14 AM

I have money waiting on the 27 spline version when ever ready, I would like to get them now, but will have to make something work, not going to miss out on these.

Thanks Bobby, Great work, and like mentioned, you other style lasted great, but wear out to a point of being too loose. Are these harder as to not wear and give some more of the strength of the materials?? Dont want to spend the money only for them to wear out like the rest.

07-17-2004, 07:33 PM	#1 (permalink)
Longfield Zeus of the Sluice Join Date: Nov 2002 Member # 15061 Location: Graham WA. Posts: 3,067	30 Spline Longfield Super Set The Strongest Front Axles For Toyota's Ever! No these are not a birfield eliminator kit. These are stonger and affordable. We have went as far as we can go with the birfield material we are currently using today. It's become obvious that we need more strength in a Toyota front axle now that they are coming out with transfer cases that allows you to do front wheel digs in competition, hard core trails and larger tires. 1- This Longfield is made from 4340 chromoly. The bell is longer for added strength. 2- The inner race and cage is a completely different and stronger design that is patented. It is made from 300M and also made longer for added strength. The new design is much stronger at full turn. 3- The balls are smaller to give the bell and inner race added thickness. 4- The inner axle is also made from 4340 chromoly. It is now 30 splines at both ends. We also eliminated the big snap ring groove. No martack need, these inners will come with the c-clip in place on the very end of the axle that snaps into the Longfield. This c-clip snaps inside the race to prevent the inner axle from sliding either direction. 5- If you noticed this new Longfield is designed to increase your turning radius by tapering the Longfield on the inside of the bell. So the inner axle does not come in contact with the bell and bind. These Longfields will turn up to 38 degrees. 6- All these parts are properly heat treated and cryogenically processed from the supplier to assure us of wearability and added strength. This 30 Spline Super Set will sell for a low price of $635.00 for all 4 pieces delivered right to your door. We currently have 6 prototypes being tested now. They will be available for sale in about 4-6 weeks. For tech questions call BOBBY LONG 253-847-8254 Attached Images __________________ MADE IN THE USA! WWW.LONGFIELDSUPERAXLES.COM ORDER LINE TERRA 360-893-0235 24 HOUR TECH LINE 253-847-8254 FREE SHIPPING! World's Best Customer Service & 24 Hour Tech Line!

07-18-2004, 02:56 AM	#2 (permalink)
DiscoDino Rock God Join Date: Nov 2002 Member # 15296 Location: Lebanon/Dubai Posts: 2,178	Bobby, Cool stuff - will you have any of these CVs to work with the 27 spline original sized axles? Nadim __________________ '92 Land Rover Disco truggy: Beadlocked 42" Iroks, V8, ZF, dual cases, ARBs, Longfielded, M8274-50s with ropes, etc... '98 Land Rover Discovery: 29" BFG ATs '02 D90 TD5 ST: 33" BFG ATs '91 Defender 110: Build in progress '07 BMW G650X Challange: Interco Terraflex 29" rear tire

07-18-2004, 03:24 AM	#3 (permalink)
blacktoy Registered User Join Date: Sep 2003 Member # 22837 Location: Guam, USA Posts: 1,111	How about some custom length inners? __________________ [URL=highvibesoffroad.com]highvibesoffroad.com[/URL]

07-18-2004, 07:46 AM	#4 (permalink)
Longfield Zeus of the Sluice Join Date: Nov 2002 Member # 15061 Location: Graham WA. Posts: 3,067	Yes we are doing chromoly 27 spline, they will sell for about $225.00ea. 4 to 6 weeks. Sorry we are not doing custom inners. you might check with PIG. __________________ MADE IN THE USA! WWW.LONGFIELDSUPERAXLES.COM ORDER LINE TERRA 360-893-0235 24 HOUR TECH LINE 253-847-8254 FREE SHIPPING! World's Best Customer Service & 24 Hour Tech Line!

07-18-2004, 08:10 AM	#5 (permalink)
SR5Dave Registered User Join Date: Dec 2002 Member # 15697 Posts: 2,862	Thanks for stepping up toyota axles once again!!! __________________ Wait, what?

07-18-2004, 09:26 AM	#6 (permalink)
Bill Collins Registered User Join Date: Feb 2000 Member # 163 Location: Village Mills, TX 77663 Posts: 2,629	i waited for as long as i could,so i ordered some longs last week.and now you come out with these also terra said that the inners were on back order,have they come in yet?thanks for improving... __________________ 85 runner with some stuff...

07-18-2004, 09:40 AM	#7 (permalink)
Longfield Zeus of the Sluice Join Date: Nov 2002 Member # 15061 Location: Graham WA. Posts: 3,067	Yes they came in friday evening. If your name is on Terras list she will call you monday.Or you can call her, sorry for the wait. __________________ MADE IN THE USA! WWW.LONGFIELDSUPERAXLES.COM ORDER LINE TERRA 360-893-0235 24 HOUR TECH LINE 253-847-8254 FREE SHIPPING! World's Best Customer Service & 24 Hour Tech Line!

07-18-2004, 09:50 AM	#8 (permalink)
Kajo4x4toy Rock God Join Date: Dec 2000 Member # 2537 Location: Williamsport, PA Posts: 2,033	That is awesome. I can't wait to hear how well prototypes are doing. When my original Longfields break I will probably by a set. __________________ Kajo 4Runner build version 3.0 RightCoast4X4 SFC, US Army (Retired) Cancer Survivor since 01/2002

07-18-2004, 12:45 PM	#10 (permalink)
Ben Holloway Registered User Join Date: Jul 2001 Member # 6054 Location: Bend, OR Posts: 2,062	i heard you talking about these or i thought it was these in goldendale, was wondering how long it was gonna be, nice work Ben

07-18-2004, 02:47 PM	#11 (permalink)
CronusTRD Rock God Join Date: Apr 2002 Member # 11141 Location: MD Posts: 1,683 Blog Entries: 1	What would one additional birf cost if we wanted a spare....for "just in case"? __________________ Mike RcRocs 4.3 Toyota Jeep www.marylandcreepers.com www.rightcoast4x4.com

07-18-2004, 03:00 PM	#12 (permalink)
vikingsven Registered User Join Date: Sep 2003 Member # 23011 Location: Windsor, Ca Posts: 2,332	O Baby! those are nice! Daddy Like!

07-18-2004, 04:51 PM	#13 (permalink)
LCOwner 181 Join Date: Feb 2000 Member # 181 Location: 100 miles from Ershim Lake Posts: 1,738	Will they be available for the FJ60/2 (17-1/4" short side)and FJ40 (29-1/8"long side)? __________________ Team Member: G-Man Racing #213

07-18-2004, 06:36 PM	#15 (permalink)
Foxfab Registered User Join Date: Oct 2000 Member # 2058 Location: North Kingstown, RI Posts: 2,878	Are the splines rolled or cut? __________________ Undoing years of Toyota engineering one SAS at a time!! 2007 Yaris--1959 FJ25--www.yankeetoys.org

07-18-2004, 07:04 PM	#16 (permalink)
SlamChops Registered User Join Date: May 2003 Member # 19372 Location: Mobtown, AL Posts: 1,517	Those look SUPER beefy. Whenever I have to step up to chromo inners, I'll definitely be calling you. __________________ Later on, Walter P. [URL=http://www.lockitupoffroad.net]Lock It Up Off-Road[/URL]

07-18-2004, 11:54 PM	#17 (permalink)
SeaBass44 www.12voltguy.com Join Date: Feb 2000 Member # 40 Location: 80 miles n-sac in Oroville, CA Posts: 30,709	__________________ 12voltguy info@12voltguy.com--davezoffroadperformance.com # 530.532.4529 TTC 2010 1989 BRONCO -Awesome web development for your business. www.mudnworks.com mud@mudnworks.com Pat's W I D E TOYOTA Front Axle --07 KTM 450XC----with "stuff"

07-19-2004, 06:17 AM	#18 (permalink)
woody Registered User Join Date: Feb 2000 Member # 260 Posts: 4,441	VERY nice...I almost look forward to breaking what I've got installed now! __________________ Brian 'woody' Swearingen - IH8MUD Inc. '74 FJ40, '95 HZJ75, '96 FZJ80, '03 2500 DMax, '09 RZR

07-19-2004, 06:43 AM	#19 (permalink)
Xjeepman Wheeler Join Date: Aug 2001 Member # 6301 Location: missouri Posts: 183	Just wondering if these will withstand daily use with out the excellerated wear associated with the softer predecessors if so then finally the best of both worlds __________________ If I only knew then what I know now

07-19-2004, 08:23 AM	#21 (permalink)
yarddog Rock God Join Date: Jul 2001 Member # 6020 Location: Denver, CO Posts: 1,954	Nice! How many pounds do they take to break on your machine vs the 27 spline? __________________ 4Runner buggy 4.3 CPI/R151/2.28 duals/on tons Last edited by yarddog; 07-19-2004 at 12:21 PM.

07-19-2004, 09:52 AM	#24 (permalink)
desertoy Zeus of the Sluice Join Date: Feb 2000 Member # 292 Location: Apple Valley Ca Posts: 4,510	Look for install pictures and commentary soon. We will be installing a set in the Longfield sponsored Formula Toy next weekend. First comp, Donners Ski ranch next month. __________________ John James Team Marlin Crawler X-Chassis #12 6 time KOH finisher 2008/2009 W.E. Rock West Coast Series Champion 2008 Pro Rock Champion Just "HAMMER" it!! My Buildup /forum/general-4x4-discussion/298203-desertoy-mustard-dog-build-pair-x-chassis.html

07-19-2004, 10:14 AM	#25 (permalink)
JamisonWorkshop Registered User Join Date: May 2001 Member # 4622 Location: Boonsboro, Maryland Posts: 2,819	I have money waiting on the 27 spline version when ever ready, I would like to get them now, but will have to make something work, not going to miss out on these. Thanks Bobby, Great work, and like mentioned, you other style lasted great, but wear out to a point of being too loose. Are these harder as to not wear and give some more of the strength of the materials?? Dont want to spend the money only for them to wear out like the rest. __________________ 94 Toy Buggified, 94 FJ80, 02 Dodge CTD Michael Jamison KGB 4Wheelers

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode