Hummer wheel centers - Pirate4x4.Com : 4x4 and Off-Road Forum

66CJdean · 08-20-2004, 11:36 AM

Price slash on rock rings and centers!
I picked up a new laser cutter that can give me a better price so I am cutting my price on the stuff I have down to the old price they were back before the big steel hike! This will be my new price once again on the new stuff. Wheel centers are once again $50 and Rock Rings will also be $50 not $60 as listed below. I want to sell the stuff I have to make room for new!

I have a new batch of wheel centers in again of the snow flake pattern and have some of the star pattern with the 8x170 and 8x6.5 pattern all in the same center so it has 16 holes.
Here is the snowflake

These are $60ea
And here is the star although this has only 8 of the holes in it. I do have them with only the 8x170 if you need the metric pattern only or I also have them with both the 8x170 and 8x6.5.

These are $55ea
Rockrings are $60ea and plastic runflats $55ea.

I have a new batch of the rebar ring coming in and they are now $6ea
Phone # is in my signature.

Thanks
Dean

mucknet · 08-25-2004, 01:13 PM

Hey Dean, don't suppose you have any wheels do you?

montywa · 08-26-2004, 04:13 AM

do you still have any of those 6 lug snoflakes laying around still. I should have bought five last time. I want 1 more.

-=PEAKABOO=- · 09-12-2004, 01:32 PM

What about something with a rockwell center?
PM me a price if you can make them.
Shipping will be to 76014

66CJdean · 09-13-2004, 08:47 AM

For Rockwell you will have to get ahold of John351C. He does any pattern for the most part and does good work. Also I only hace a jig for welding in 8 lug centers so I can dial indicate them in so I know they are as true as you can get a hummer wheel.

66CJdean · 09-24-2004, 08:01 AM

Quote:

Originally Posted by montywa

do you still have any of those 6 lug snoflakes laying around still. I should have bought five last time. I want 1 more.

I have 3 of them I think.

I also have a new batch of the rebar rings coming in this weekend.

Blazr77400 · 10-15-2004, 11:30 PM

How much to recenter 5 hummer wheels? I already have the wheels, just need centers and then have them put on.

smokd · 10-19-2004, 04:17 PM

Do you sell complete hummer wheels with choice of centers and backspacing?
If so do you got a price?

Rockabilly · 10-20-2004, 01:13 AM

how much to recenter four rims with 5 on 5.5 centers?

66CJdean · 10-20-2004, 03:52 PM

Quote:

Originally Posted by Blazr77400

How much to recenter 5 hummer wheels? I already have the wheels, just need centers and then have them put on.

You choose the center and add $50 so $105 or $110
For that price I will cut out the old center on the milling machine, jig weld in the new center, bead blast the wheel, and primer it. If you want the rebar ring welded on also add $20 or I also just got a batch of the 3/8" laser cut rock rings. If you want them welded on add $65.
I have a new batch of the rebar rings in now also.
I am all out of wheels so you will have to come up with some wheels to have recentered. I only do 8 lug for the most part. I have 4 of the 6x5.5 pattern left that are 4 for $150.

66CJdean · 10-29-2004, 09:49 AM

I just got in a new batch of laser cut rock rings and also got in a batch of the rebar rings.

bigblacktj · 11-26-2004, 02:32 PM

what is the rebar for and do I need it?

66CJdean · 11-26-2004, 05:35 PM

The rebar ring is for the outer lip of the wheel and yes you need something for the outer lip or it will smash in or peal away and leak once you grind the wheel on a rock. The rebar ring and laser cut rock ring do the same thing for the most part.

bigblacktj · 11-28-2004, 08:21 AM

will the rebar mess with my wheels being balanced

66CJdean · 11-28-2004, 11:24 AM

Quote:

Originally Posted by bigblacktj

will the rebar mess with my wheels being balanced

Yes. Due to the welding you will have to do and if you are running the hammer on weights they will have to come off and you will and should run the stick on weights on the inner part of the wheel.
I'll search for freds40 and see if I can find a photo of his wheels with them on.

freds40 · 11-28-2004, 01:50 PM

Her ya go Dean. I solid welded the outer, did 4 stitch welds on the inner side and ground the outer weld smooth so I can still get da ladies standing outside the mall.

bigblacktj · 11-30-2004, 06:47 PM

can you take a closer pic of the weld and draw an arrow to it I am still having trouble seeing why I need these so bad.

JeeponRock · 12-01-2004, 01:52 PM

Do you have inserts (to replace the runflats) and how much for 5 shipped to 30087?

JoshC · 12-06-2004, 04:31 AM

Quote:

Originally Posted by bigblacktj

can you take a closer pic of the weld and draw an arrow to it I am still having trouble seeing why I need these so bad.

You need to see Hummer wheels (those that see trail use) without the rings or rebar. They get all mashed up just as Dean described.

IMO The rebar is inexpensive and effective. I have and prefer the rockrings. Not only do they protect the lip, but they protect the 8-bolts too. I found as an added bonus while running up winch hill 3 at fordice they actually work as a traction aid too.

66CJdean · 12-08-2004, 09:21 AM

Quote:

Originally Posted by JeeponRock

Do you have inserts (to replace the runflats) and how much for 5 shipped to 30087?

Yes i have runflats. I'll have to check on the shipping though and shoot you a PM on that.

The reson you need them is only if you are spending time in the rocks. The outer lip of the wheel is not that tough so once it gets smashed against a rock or you pinch the rear into the V or something the chance of the outer lip pealing out or smashing flat and leaking is very good. If you spend all your time in mud then you probably don't need them.

Jabbodog · 02-13-2005, 09:34 AM

Can you still make weld ins for a toyota 6 lug? I could really use some. thanks.

91blaze · 02-16-2005, 05:10 AM

Can you make a center with to fit a 6lug and 8lug pattern on the same center?????

Edit: No you can't

Geesh · 02-22-2005, 03:00 PM

Quote:

Originally Posted by Jabbodog

Can you still make weld ins for a toyota 6 lug? I could really use some. thanks.

You mean these

Dean's H/W rocks

jethrodeg · 03-14-2005, 11:07 AM

Dean,

How much for 4 pvc R-F's?
How much for 4 rebar's with welding?
Do you sell the H1 wheels seals?

I will take care of the shipping.

Thanks!

08-20-2004, 11:36 AM	#1 (permalink)
66CJdean Pirate4x4 Addict! Join Date: May 2000 Member # 940 Location: Lincoln, Ca Posts: 6,401	Hummer wheel centers Price slash on rock rings and centers! I picked up a new laser cutter that can give me a better price so I am cutting my price on the stuff I have down to the old price they were back before the big steel hike! This will be my new price once again on the new stuff. Wheel centers are once again $50 and Rock Rings will also be $50 not $60 as listed below. I want to sell the stuff I have to make room for new! I have a new batch of wheel centers in again of the snow flake pattern and have some of the star pattern with the 8x170 and 8x6.5 pattern all in the same center so it has 16 holes. Here is the snowflake These are $60ea And here is the star although this has only 8 of the holes in it. I do have them with only the 8x170 if you need the metric pattern only or I also have them with both the 8x170 and 8x6.5. These are $55ea Rockrings are $60ea and plastic runflats $55ea. I have a new batch of the rebar ring coming in and they are now $6ea Phone # is in my signature. Thanks Dean __________________ WWW.PCRYO.COM Deep Cryogenic Tempering Service Find all my products at www.KICKASSOFFROAD.COM 916-434-6978 Custom Axles built to order. Got 40 spline? I have the hubs, spindles, and axles you need to kickass! Custom Hummer wheels and centers Axle Resplining

09-12-2004, 01:32 PM	#4 (permalink)
-=PEAKABOO=- Granite Guru Join Date: Jul 2003 Member # 21296 Location: Dallas Fort Worth Posts: 686	What about something with a rockwell center? PM me a price if you can make them. Shipping will be to 76014 __________________ Peddling trash and pushing junk!!!

09-13-2004, 08:47 AM	#5 (permalink)
66CJdean Pirate4x4 Addict! Join Date: May 2000 Member # 940 Location: Lincoln, Ca Posts: 6,401	For Rockwell you will have to get ahold of John351C. He does any pattern for the most part and does good work. Also I only hace a jig for welding in 8 lug centers so I can dial indicate them in so I know they are as true as you can get a hummer wheel. __________________ WWW.PCRYO.COM Deep Cryogenic Tempering Service Find all my products at www.KICKASSOFFROAD.COM 916-434-6978 Custom Axles built to order. Got 40 spline? I have the hubs, spindles, and axles you need to kickass! Custom Hummer wheels and centers Axle Resplining

10-15-2004, 11:30 PM	#7 (permalink)
Blazr77400 Wheeler Join Date: Sep 2001 Member # 7228 Location: Ogden, Utah Posts: 485	How much to recenter 5 hummer wheels? I already have the wheels, just need centers and then have them put on. __________________ PICTURE LINK 84 K30 Crew Cab short bed HP Tuned and Cammed LS 6.0, 4l80e NP208 range box and divorce mounted 205, Dana 60, 14 bolt, Hydraulic Assist 4 inch 52s, 3 inch 64s with 4" shackle flip 20x12 Forged Centerlines on 41x14.50 Irok radials

10-19-2004, 04:17 PM	#8 (permalink)
smokd Granite Guru Join Date: Jan 2004 Member # 26329 Location: Loomis, CA. & Grizzly Flats Posts: 525	Do you sell complete hummer wheels with choice of centers and backspacing? If so do you got a price? __________________ If you have thin skin, thicken it. Sarcasm is the breakfast of champions........................BITCH! "Any society that would give up a little liberty to gain a little security will deserve neither and lose both" - Benjamin Franklin KJ6NQX DDJC

08-25-2004, 01:13 PM	#2 (permalink)
mucknet Registered User Join Date: Aug 2003 Member # 21995 Location: Atrashcadero, CA Posts: 366	Hey Dean, don't suppose you have any wheels do you?

08-26-2004, 04:13 AM	#3 (permalink)
montywa Registered User Join Date: Nov 2003 Member # 24676 Location: Browns camp Posts: 192	do you still have any of those 6 lug snoflakes laying around still. I should have bought five last time. I want 1 more.

10-20-2004, 01:13 AM	#9 (permalink)
Rockabilly Registered User Join Date: Sep 2002 Member # 13880 Location: Whidbey Island, WA Posts: 1,092	how much to recenter four rims with 5 on 5.5 centers? __________________ 84runner with tons,r151,duals with 4.7s in the rear, a little tube and some tenderized sheetmetal. [URL=www.lucky13offroad.com/phpbb2]Lucky13[/URL] [URL=http://www.bluehost.com/track/Luckyone/text1]CLICK HERE TO SIGN UP FOR BLUEHOST.COM NOW[/URL]

10-29-2004, 09:49 AM	#11 (permalink)
66CJdean Pirate4x4 Addict! Join Date: May 2000 Member # 940 Location: Lincoln, Ca Posts: 6,401	I just got in a new batch of laser cut rock rings and also got in a batch of the rebar rings. __________________ WWW.PCRYO.COM Deep Cryogenic Tempering Service Find all my products at www.KICKASSOFFROAD.COM 916-434-6978 Custom Axles built to order. Got 40 spline? I have the hubs, spindles, and axles you need to kickass! Custom Hummer wheels and centers Axle Resplining

11-26-2004, 02:32 PM	#12 (permalink)
bigblacktj Registered User Join Date: Oct 2004 Member # 37548 Posts: 1,217	what is the rebar for and do I need it?

11-26-2004, 05:35 PM	#13 (permalink)
66CJdean Pirate4x4 Addict! Join Date: May 2000 Member # 940 Location: Lincoln, Ca Posts: 6,401	The rebar ring is for the outer lip of the wheel and yes you need something for the outer lip or it will smash in or peal away and leak once you grind the wheel on a rock. The rebar ring and laser cut rock ring do the same thing for the most part. __________________ WWW.PCRYO.COM Deep Cryogenic Tempering Service Find all my products at www.KICKASSOFFROAD.COM 916-434-6978 Custom Axles built to order. Got 40 spline? I have the hubs, spindles, and axles you need to kickass! Custom Hummer wheels and centers Axle Resplining

11-28-2004, 08:21 AM	#14 (permalink)
bigblacktj Registered User Join Date: Oct 2004 Member # 37548 Posts: 1,217	will the rebar mess with my wheels being balanced

11-28-2004, 01:50 PM	#16 (permalink)
freds40 Zeus of the Sluice Join Date: Oct 2002 Member # 14437 Location: Fresno, CA Posts: 2,647	Her ya go Dean. I solid welded the outer, did 4 stitch welds on the inner side and ground the outer weld smooth so I can still get da ladies standing outside the mall. Attached Images __________________ Marlin Crawler Sales www.marlincrawler.com 559-252-7295 brendan@marlincrawler.com

11-30-2004, 06:47 PM	#17 (permalink)
bigblacktj Registered User Join Date: Oct 2004 Member # 37548 Posts: 1,217	can you take a closer pic of the weld and draw an arrow to it I am still having trouble seeing why I need these so bad.

12-01-2004, 01:52 PM	#18 (permalink)
JeeponRock Registered User Join Date: Feb 2004 Member # 27787 Location: Stone Mountain, GA Posts: 233	Do you have inserts (to replace the runflats) and how much for 5 shipped to 30087? __________________ 71 Commando with 4.0HO, nv4500. D60, D60HP, 38" TSL SXs, Hummer wheels... under construction. Make April 15th just another day. [url]www.FairTax.org[/url]

02-13-2005, 09:34 AM	#21 (permalink)
Jabbodog Registered User Join Date: Aug 2004 Member # 34780 Location: Nashville, Tn Posts: 5	Can you still make weld ins for a toyota 6 lug? I could really use some. thanks. __________________ 1985 4Runner, 4-link rear, lifted, locked, chopped, bobbed. Dual cases. 39.5" TSL's WWW.DIXIECRAWLERS.COM

02-16-2005, 05:10 AM	#22 (permalink)
91blaze Zeus of the Sluice Join Date: Jul 2003 Member # 21282 Location: Troy, MO Posts: 3,312	Can you make a center with to fit a 6lug and 8lug pattern on the same center????? Edit: No you can't Last edited by 91blaze; 02-21-2005 at 08:01 AM.

03-14-2005, 11:07 AM	#24 (permalink)
jethrodeg H Rated Join Date: Sep 2004 Member # 36099 Location: Nor Cal Posts: 1,288	Dean, How much for 4 pvc R-F's? How much for 4 rebar's with welding? Do you sell the H1 wheels seals? I will take care of the shipping. Thanks! Last edited by jethrodeg; 03-14-2005 at 11:12 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode