Stazworks 22" double beadlocks! - Pirate4x4.Com : 4x4 and Off-Road Forum

JOHNS351C · 10-29-2004, 06:51 AM

Stazworks has just invested in a new size wheel.
To compliment the new 22" tires out there we are now offering 22" double beadlocks in any width and most any bolt pattern. We have even come out with some new center designs to compliment the 22's.
We would like to sell all the rims with a trussed front plate that incresses strength incredibly and makes bending centers next to impossible. This is going to be one of the toughest wheel we have ever made, and because of the trussing it can be made out of lighter materials to keep the weight very reasonable. Check out the draftings below to see how the front plates will be trussed. This will be a show quality wheel that can hold more than its own offroad!
We will offer this rim style in a 5 and 6 spoke rim. The 6 spoke rims will be used for the rims with rockwell, unimog and volvo bolt paterns.

Like always different center designs will be available upon request.

With some help we have purchased near $16,000 of inventory to make these rims happen and ensure availability.

The price on these rims is not quite set,
Call for a quote

rockmup · 10-29-2004, 07:05 PM

Nice John.

OldGreen · 10-29-2004, 09:51 PM

Very, Very cool

1972CJ5+1 · 10-31-2004, 09:37 PM

Sweet!!! Is this design only available in the 22s, or on other sizes also? Just waiting on my steering so I can measure for mine.

JOHNS351C · 11-01-2004, 07:20 AM

I could do the design in other sizes as well. this deisgn will cost an aditional 75$ per rim for the folded gussets.

John

JOHNS351C · 11-05-2004, 04:57 PM

These will also be available with a stamped center!
We are in the middle of purchasing a 275 ton press for doing this.
The first pressed centers were done just this week for the med. duty 20's and turned out exceptionally well. The pressed centers are available with most any of the centers designs and double the resistance to side load over a straight center plate!

cj8rckcrlr · 11-05-2004, 08:19 PM

nice, as long as the welds don't leak like the set of 16.5s we got....

JOHNS351C · 11-06-2004, 07:48 AM

You got a set from me that had leaky welds?
who was the order under? Did you ever tell me about it?

cj8rckcrlr · 11-06-2004, 07:13 PM

we got some 16.5x12 wheels for some 49 iroks...and all of them leaked around the o-rings. then we used silicone and got the o-rings to seal, then the next day we had a flat....when we filled them back up and sprayed water on them, there were a couple pin holes in the welds, i had to weld them up and now they hold....we just need to tear them back down and get them re-powdercoated....
the order was either under Rocket City Offroad, or under Dan Euto

JOHNS351C · 11-08-2004, 07:12 AM

I remember the wheels but do not remember hearing anything about any trouble with them. If there is a problem I need to hear about it so I can fix it for future customers at least. If you dont mind I would like a phone call from you to discuss what actually went wrong. I know the o-rings can be a pain to get sealed. I have been doing things a bit differantly latly to help in that area. As for pinholes, I have heard very few problems with them, but it can happen, I am interested in more details on them as well.
please just give a call to the shop if you have a chance sometime today and we can discuss it.

John

Rokcrler · 11-08-2004, 07:41 PM

Actually John, i (Mo) called and left a message on 2 of your numbers... I didnt expect a call last week since i know some vendors were at SEMA... Call me and we'll talk off the board.
~Mo

JOHNS351C · 11-08-2004, 09:33 PM

Here is some pics of the stamped centers. We feel these add around 75-100% more resistance to bending from side load. These are available now in med. duty 20's with a rock well and unimog patern. The option will soon become available for the light 20's and the 22's next. What size will be available after that will be determined by demand. the price for this option will be around 60$ per rim. Stamped centers are available with any of the designs right now.

JOHNS351C · 12-13-2004, 06:51 AM

We have been doing many pressed centers lately and due to the results most all rims will start coming with pressed centers.

SHERPA · 12-13-2004, 08:29 AM

Glad to see your products are still in the "constant-improvement-program".

definetely what I want to run on my cj....... alloys would be nice, just due to

shear weight savings alone, but for durability, your rims gotta be the toughest

out there.....

--Sherpa

JOHNS351C · 12-15-2004, 08:55 AM

Quote:

Originally Posted by SHERPA

Glad to see your products are still in the "constant-improvement-program".

definetely what I want to run on my cj....... alloys would be nice, just due to

shear weight savings alone, but for durability, your rims gotta be the toughest

out there.....

--Sherpa

What does most alloys weigh?
There is always ways to lighten my rims, I have yet to figure out to what extent but there are some ideas in mind to save some weight.

John

OldGreen · 12-15-2004, 01:05 PM

I'd think that John's rims, minus the rock rings, would be very close to the weight of an average alloy beadlock especially if it was a double lock. My StazWorks rims weight just about 46lbs each with the rock ring and I hear that it weighs around 7 lbs. . .these are 15x10s.

jchio · 08-17-2005, 07:27 AM

Do you sell the centers (stamped) with unimog pattern to fit a Hummer wheel??

If so, please quote me 4 shipped to 78852

thanks!!

CCOR · 08-17-2005, 07:39 AM

do you have 20's for superduty pattern that are non beadlock and can be run on the street?
thanks
bobby

JOHNS351C · 08-19-2005, 06:42 AM

Quote:

Originally Posted by jchio

Do you sell the centers (stamped) with unimog pattern to fit a Hummer wheel??

If so, please quote me 4 shipped to 78852

thanks!!

I havn't checked out this thread in quite awhile, now Ai am glad I did.

your looking for a pressed center for a mog in a hummer rim, Ironicly I will have a die for that done in about 2 weeks.
If you want you could order them now or hit me up in two weeks for it if you are still interested.
cost will run 85$ ea. though

John

JOHNS351C · 08-19-2005, 07:01 AM

Quote:

Originally Posted by CCOR

do you have 20's for superduty pattern that are non beadlock and can be run on the street?
thanks
bobby

All the wheels are off road use only.
I can do a 20 in a superduty wheel non beadlock if you like though that could perform on road with no problem. There would be a few differant way to do it so if you are interested it would be best to just give me a call about it.

john

10-29-2004, 06:51 AM	#1 (permalink)
JOHNS351C Registered User Join Date: Nov 2001 Member # 8282 Location: Wisconsin Posts: 1,125	Stazworks 22" double beadlocks! Stazworks has just invested in a new size wheel. To compliment the new 22" tires out there we are now offering 22" double beadlocks in any width and most any bolt pattern. We have even come out with some new center designs to compliment the 22's. We would like to sell all the rims with a trussed front plate that incresses strength incredibly and makes bending centers next to impossible. This is going to be one of the toughest wheel we have ever made, and because of the trussing it can be made out of lighter materials to keep the weight very reasonable. Check out the draftings below to see how the front plates will be trussed. This will be a show quality wheel that can hold more than its own offroad! We will offer this rim style in a 5 and 6 spoke rim. The 6 spoke rims will be used for the rims with rockwell, unimog and volvo bolt paterns. Like always different center designs will be available upon request. With some help we have purchased near $16,000 of inventory to make these rims happen and ensure availability. The price on these rims is not quite set, Call for a quote Attached Images __________________ [SIZE=4][COLOR=DarkOrange]Stazworks[/COLOR][/SIZE] [B]The leader in Custom Double Beadlock wheels[/B] On SALE NOW [COLOR="DarkOrange"][SIZE="2"][I]20x14's[/I][/SIZE][/COLOR] Due to NEW tooling we can now build std. 1pc 20x14's, and up to a 20x25's without banding! [COLOR=DarkOrange]www.STAZWORKS.com[/COLOR] (715) 333-RIMS,(7467) shop number (715) 333-7250 office John Staszak-owner

10-29-2004, 07:05 PM	#2 (permalink)
rockmup Zeus of the Sluice Join Date: Jan 2003 Member # 16699 Location: Greenwell Springs La. Posts: 4,262	Nice John. __________________ __________________ 07/C2 SOT /Making guns and fun toys, one hammer swing at a time Need quality ammo ? AMERICAN LEAD DISTRIBUTORS Need a POV system ? REPLAY XD

10-31-2004, 09:37 PM	#4 (permalink)
1972CJ5+1 Registered User Join Date: Dec 2002 Member # 15811 Location: Oakdale CA Posts: 1,936	Sweet!!! Is this design only available in the 22s, or on other sizes also? Just waiting on my steering so I can measure for mine. __________________ [COLOR="Lime"][SIZE="3"][B]booger weldz [/B][/SIZE]alternate account[/COLOR] 1994 fzj80 Elockers front and rear, 35 km2s, 10k winch, coolest station wagon in the world!! [COLOR="Silver"]♣[/COLOR][B][COLOR="Lime"][FONT="Arial Black"][B]Bink'sFab[/B][/FONT][/B][/color][COLOR="Silver"]rication[/COLOR][COLOR="Lime"]♣[/COLOR] - [URL="http://facebook.com/binksfab"]facebook.com/binksfab[/URL]

11-01-2004, 07:20 AM	#5 (permalink)
JOHNS351C Registered User Join Date: Nov 2001 Member # 8282 Location: Wisconsin Posts: 1,125	I could do the design in other sizes as well. this deisgn will cost an aditional 75$ per rim for the folded gussets. John __________________ [SIZE=4][COLOR=DarkOrange]Stazworks[/COLOR][/SIZE] [B]The leader in Custom Double Beadlock wheels[/B] On SALE NOW [COLOR="DarkOrange"][SIZE="2"][I]20x14's[/I][/SIZE][/COLOR] Due to NEW tooling we can now build std. 1pc 20x14's, and up to a 20x25's without banding! [COLOR=DarkOrange]www.STAZWORKS.com[/COLOR] (715) 333-RIMS,(7467) shop number (715) 333-7250 office John Staszak-owner

11-05-2004, 04:57 PM	#6 (permalink)
JOHNS351C Registered User Join Date: Nov 2001 Member # 8282 Location: Wisconsin Posts: 1,125	These will also be available with a stamped center! We are in the middle of purchasing a 275 ton press for doing this. The first pressed centers were done just this week for the med. duty 20's and turned out exceptionally well. The pressed centers are available with most any of the centers designs and double the resistance to side load over a straight center plate! __________________ [SIZE=4][COLOR=DarkOrange]Stazworks[/COLOR][/SIZE] [B]The leader in Custom Double Beadlock wheels[/B] On SALE NOW [COLOR="DarkOrange"][SIZE="2"][I]20x14's[/I][/SIZE][/COLOR] Due to NEW tooling we can now build std. 1pc 20x14's, and up to a 20x25's without banding! [COLOR=DarkOrange]www.STAZWORKS.com[/COLOR] (715) 333-RIMS,(7467) shop number (715) 333-7250 office John Staszak-owner

10-29-2004, 09:51 PM	#3 (permalink)
OldGreen Registered User Join Date: Jun 2003 Member # 20198 Location: Eastern Washington Posts: 197	Very, Very cool

11-05-2004, 08:19 PM	#7 (permalink)
cj8rckcrlr Registered User Join Date: Feb 2004 Member # 27868 Location: Huntsville/Cullman, AL Posts: 630	nice, as long as the welds don't leak like the set of 16.5s we got.... __________________ JV Fabrication 256.652.3029

11-06-2004, 07:48 AM	#8 (permalink)
JOHNS351C Registered User Join Date: Nov 2001 Member # 8282 Location: Wisconsin Posts: 1,125	You got a set from me that had leaky welds? who was the order under? Did you ever tell me about it? __________________ [SIZE=4][COLOR=DarkOrange]Stazworks[/COLOR][/SIZE] [B]The leader in Custom Double Beadlock wheels[/B] On SALE NOW [COLOR="DarkOrange"][SIZE="2"][I]20x14's[/I][/SIZE][/COLOR] Due to NEW tooling we can now build std. 1pc 20x14's, and up to a 20x25's without banding! [COLOR=DarkOrange]www.STAZWORKS.com[/COLOR] (715) 333-RIMS,(7467) shop number (715) 333-7250 office John Staszak-owner

11-06-2004, 07:13 PM	#9 (permalink)
cj8rckcrlr Registered User Join Date: Feb 2004 Member # 27868 Location: Huntsville/Cullman, AL Posts: 630	we got some 16.5x12 wheels for some 49 iroks...and all of them leaked around the o-rings. then we used silicone and got the o-rings to seal, then the next day we had a flat....when we filled them back up and sprayed water on them, there were a couple pin holes in the welds, i had to weld them up and now they hold....we just need to tear them back down and get them re-powdercoated.... the order was either under Rocket City Offroad, or under Dan Euto __________________ JV Fabrication 256.652.3029

11-08-2004, 07:12 AM	#10 (permalink)
JOHNS351C Registered User Join Date: Nov 2001 Member # 8282 Location: Wisconsin Posts: 1,125	I remember the wheels but do not remember hearing anything about any trouble with them. If there is a problem I need to hear about it so I can fix it for future customers at least. If you dont mind I would like a phone call from you to discuss what actually went wrong. I know the o-rings can be a pain to get sealed. I have been doing things a bit differantly latly to help in that area. As for pinholes, I have heard very few problems with them, but it can happen, I am interested in more details on them as well. please just give a call to the shop if you have a chance sometime today and we can discuss it. John __________________ [SIZE=4][COLOR=DarkOrange]Stazworks[/COLOR][/SIZE] [B]The leader in Custom Double Beadlock wheels[/B] On SALE NOW [COLOR="DarkOrange"][SIZE="2"][I]20x14's[/I][/SIZE][/COLOR] Due to NEW tooling we can now build std. 1pc 20x14's, and up to a 20x25's without banding! [COLOR=DarkOrange]www.STAZWORKS.com[/COLOR] (715) 333-RIMS,(7467) shop number (715) 333-7250 office John Staszak-owner

11-08-2004, 07:41 PM	#11 (permalink)
Rokcrler Registered User Join Date: Jul 2002 Member # 12756 Location: Hsv, Al Posts: 881	Actually John, i (Mo) called and left a message on 2 of your numbers... I didnt expect a call last week since i know some vendors were at SEMA... Call me and we'll talk off the board. ~Mo Last edited by Rokcrler; 11-08-2004 at 07:43 PM.

11-08-2004, 09:33 PM	#12 (permalink)
JOHNS351C Registered User Join Date: Nov 2001 Member # 8282 Location: Wisconsin Posts: 1,125	Here is some pics of the stamped centers. We feel these add around 75-100% more resistance to bending from side load. These are available now in med. duty 20's with a rock well and unimog patern. The option will soon become available for the light 20's and the 22's next. What size will be available after that will be determined by demand. the price for this option will be around 60$ per rim. Stamped centers are available with any of the designs right now. Attached Images __________________ [SIZE=4][COLOR=DarkOrange]Stazworks[/COLOR][/SIZE] [B]The leader in Custom Double Beadlock wheels[/B] On SALE NOW [COLOR="DarkOrange"][SIZE="2"][I]20x14's[/I][/SIZE][/COLOR] Due to NEW tooling we can now build std. 1pc 20x14's, and up to a 20x25's without banding! [COLOR=DarkOrange]www.STAZWORKS.com[/COLOR] (715) 333-RIMS,(7467) shop number (715) 333-7250 office John Staszak-owner

12-13-2004, 06:51 AM	#13 (permalink)
JOHNS351C Registered User Join Date: Nov 2001 Member # 8282 Location: Wisconsin Posts: 1,125	We have been doing many pressed centers lately and due to the results most all rims will start coming with pressed centers. __________________ [SIZE=4][COLOR=DarkOrange]Stazworks[/COLOR][/SIZE] [B]The leader in Custom Double Beadlock wheels[/B] On SALE NOW [COLOR="DarkOrange"][SIZE="2"][I]20x14's[/I][/SIZE][/COLOR] Due to NEW tooling we can now build std. 1pc 20x14's, and up to a 20x25's without banding! [COLOR=DarkOrange]www.STAZWORKS.com[/COLOR] (715) 333-RIMS,(7467) shop number (715) 333-7250 office John Staszak-owner

12-13-2004, 08:29 AM	#14 (permalink)
SHERPA Registered User Join Date: Feb 2000 Member # 191 Location: silicon valley Posts: 2,509	Glad to see your products are still in the "constant-improvement-program". definetely what I want to run on my cj....... alloys would be nice, just due to shear weight savings alone, but for durability, your rims gotta be the toughest out there..... --Sherpa __________________ [QUOTE][i]Originally posted by LAME [/i] [B] The guys designing cages for the D9 dozer on your Christmas list are going about this a bit differently way then a few rednecks, too much beer, and a JD2:D [/B][/QUOTE]

12-15-2004, 01:05 PM	#16 (permalink)
OldGreen Registered User Join Date: Jun 2003 Member # 20198 Location: Eastern Washington Posts: 197	I'd think that John's rims, minus the rock rings, would be very close to the weight of an average alloy beadlock especially if it was a double lock. My StazWorks rims weight just about 46lbs each with the rock ring and I hear that it weighs around 7 lbs. . .these are 15x10s.

08-17-2005, 07:27 AM	#17 (permalink)
jchio Registered User Join Date: Feb 2000 Member # 34 Location: Close to Hell, Mx Posts: 1,180	Do you sell the centers (stamped) with unimog pattern to fit a Hummer wheel?? If so, please quote me 4 shipped to 78852 thanks!! __________________ [URL="http://www.Jeeperos.com/foros"]Jeeperos.com[/URL] Well, the guy wants to run for president, he thinks Moby Dick is a venereal disease.

08-17-2005, 07:39 AM	#18 (permalink)
CCOR Pirate4x4 Addict! Join Date: Jun 2005 Member # 48630 Location: Athens, GA Posts: 6,028 Blog Entries: 2	do you have 20's for superduty pattern that are non beadlock and can be run on the street? thanks bobby

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode