D60 Front Axle Shafts by Alloy USA (Custom Lengths) - Pirate4x4.Com : 4x4 and Off-Road Forum

roundeye · 10-25-2005, 01:23 AM

We just got the Alloy USA D60 inners! Pretty excited since we all waited along time. Designed for the most demanding wheeler who needs 35 splines and dual heat treat with extra material in all the right places.
For those of you who have purchased the outters, Chevy or Ford's, we can couple them up with CTM joints and get your inners made to you're specific lengths.
At this time, we have blanks that are 22" for the short side and 39" for the long side. Give us you're dimensions and we can have them cut and splined to fit.
10 year warranty! No questions asked.

Please email or call us for the order form.

Pirate4x4.com special for both inners cut and splined to your door till Nov. 15th or until the first 10 sets are sold. $475.00 in the lower States.

roundeye · 11-11-2005, 09:42 AM

Custom lengths available.
Email us for the form to fill out.

ubbzy · 11-12-2005, 10:53 AM

A full set for 79 Ford Dana 60 Shipped to 11757

roundeye · 11-16-2005, 10:44 AM

Quote:

Originally Posted by ubbzy

A full set for 79 Ford Dana 60 Shipped to 11757

Sent you an email.

MNBen · 11-17-2005, 06:59 PM

Full set of 79 Ford (35 spline outers) with the inners custom length. The driver side is 2.5 inches narrower than stock and the passenger side is 3" narrower than stock. shipping to 55125

roundeye · 11-23-2005, 03:56 PM

Quote:

Originally Posted by MNBen

Full set of 79 Ford (35 spline outers) with the inners custom length. The driver side is 2.5 inches narrower than stock and the passenger side is 3" narrower than stock. shipping to 55125

$775.00 inners/outters
Shipping $35.00
$800 to your door.
Call us to finalize order please.

roundeye · 12-12-2005, 05:50 PM

Free shipping from now till Dec. 24th on custom orders.
Ground in the lower 48 states.
Please call us and mention this on your order.

Todd W · 12-14-2005, 12:07 AM

Hey Bruce, how's it going?

What "Alloy" are these made with

Thanks
-Todd

roundeye · 12-14-2005, 08:32 AM

Quote:

Originally Posted by Todd W

Hey Bruce, how's it going?

What "Alloy" are these made with

Thanks
-Todd

Todd, these are 4340 Chromoly with the 10 year warranty.

Lowtorious · 12-21-2005, 04:34 PM

Please PM me for a set of '92 Dodge 35 spline inners and outers. Warn 35 spline hubs too if you carry them.
Long side inner ~ 4340, 31"
Short side - 4340, stock length, ~ 17"
Outers - Stock length, 35 spline, 4340
Spicer u-joints.
Thanks!

roundeye · 12-22-2005, 10:28 AM

Quote:

Originally Posted by Lowtorious

Please PM me for a set of '92 Dodge 35 spline inners and outers. Warn 35 spline hubs too if you carry them.
Long side inner ~ 4340, 31"
Short side - 4340, stock length, ~ 17"
Outers - Stock length, 35 spline, 4340
Spicer u-joints.
Thanks!

Nice talking with you Andy. Let us know if you need anything additional in the future.

roundeye · 12-26-2005, 05:39 PM

We did Free shipping today on 2 custom orders. Any others want the deal?
We'll run it till the end of the year.

RufftyTuffty · 12-27-2005, 08:46 PM

Nice talking with ya Bruce.

Looking forward to the 12th...if not before.

~Mike

snohman · 12-29-2005, 09:27 PM

price for 2 D60 outer shafts..thanks

Todd W · 12-29-2005, 09:39 PM

Is it true that these are identical to the Superiors as the superior designer now designs for Alloy USA? Or is this a rumor?

roundeye · 12-30-2005, 09:38 AM

Quote:

Originally Posted by snohman

price for 2 D60 outer shafts..thanks

You have mail.

roundeye · 12-30-2005, 09:40 AM

Quote:

Originally Posted by Todd W

Is it true that these are identical to the Superiors as the superior designer now designs for Alloy USA? Or is this a rumor?

Rumor I believe.
You ready to get your order going Todd? You won't be disappointed with Alloy's shafts.

Superior Axle & Gear · 12-30-2005, 03:46 PM

Quote:

Originally Posted by Todd W

Is it true that these are identical to the Superiors as the superior designer now designs for Alloy USA? Or is this a rumor?

There is NO affiliation with alloy parts and ours.

Mike

roundeye · 01-10-2006, 09:56 AM

Quote:

Originally Posted by Superior Axle & Gear

There is NO affiliation with alloy parts and ours.

Mike

Thanks for the clarification Mike.

JeffHPK5 · 01-10-2006, 01:00 PM

Looking for a price for stock length set inner/outers GM D60 35spl. to 45252,
also rear set for D70 35 spl 39.750 long to 45252.

Thanks, Jeff

roundeye · 01-19-2006, 06:35 PM

Quote:

Originally Posted by JeffHPK5

Looking for a price for stock length set inner/outers GM D60 35spl. to 45252,
also rear set for D70 35 spl 39.750 long to 45252.

Thanks, Jeff

Jeff, we don't do PM's on this board. Can you either send us an email or we can call/email you if you give us your info.
Alloy USA doesn't have stock lengths in stock for your 60 except for the GM outters. Your inners will be custom from us if you want Chromoly.

Blue-Beard · 01-19-2006, 06:58 PM

I saw your post about the d44 shafts got any prices on those? Outers + inners?
Sorry to clutter up your d60 shaft post.

roundeye · 01-19-2006, 07:12 PM

Quote:

Originally Posted by Blue-Beard

I saw your post about the d44 shafts got any prices on those? Outers + inners?
Sorry to clutter up your d60 shaft post.

Call me to discuss. We need to get some out there and will give you a great deal now. We only have GM outers.

Blue-Beard · 01-19-2006, 07:24 PM

Quote:

Originally Posted by roundeye

Call me to discuss. We need to get some out there and will give you a great deal now. We only have GM outers.

great cause thats what I need.
I'll call you tommorow.
Thanks

-Todd
BTW I just sent you a email under the name pappaf2

RufftyTuffty · 01-21-2006, 07:59 PM

Got my new long side set AOK on Thurday....sweetness

Had them together and installed in a couple of hours and went for a run Friday afternoon

Thanks for the killer shafts, Mike.

10-25-2005, 01:23 AM	#1 (permalink)
roundeye Rock God Join Date: Aug 2001 Member # 6430 Location: Placerville, CA Posts: 1,242	D60 Front Axle Shafts by Alloy USA (Custom Lengths) We just got the Alloy USA D60 inners! Pretty excited since we all waited along time. Designed for the most demanding wheeler who needs 35 splines and dual heat treat with extra material in all the right places. For those of you who have purchased the outters, Chevy or Ford's, we can couple them up with CTM joints and get your inners made to you're specific lengths. At this time, we have blanks that are 22" for the short side and 39" for the long side. Give us you're dimensions and we can have them cut and splined to fit. 10 year warranty! No questions asked. Please email or call us for the order form. Pirate4x4.com special for both inners cut and splined to your door till Nov. 15th or until the first 10 sets are sold. $475.00 in the lower States. Attached Images __________________ Roundeyes.com OutbackToilets.com

11-11-2005, 09:42 AM	#2 (permalink)
roundeye Rock God Join Date: Aug 2001 Member # 6430 Location: Placerville, CA Posts: 1,242	Custom lengths available. Email us for the form to fill out. __________________ Roundeyes.com OutbackToilets.com

11-12-2005, 10:53 AM	#3 (permalink)
ubbzy Registered User Join Date: Oct 2004 Member # 36430 Location: Long Island, NY Posts: 316	A full set for 79 Ford Dana 60 Shipped to 11757 __________________ 94' GMC K1500 [COLOR=Red]SAS'ified[/COLOR]! Front HPD60 w/ARB Locker Rear D60 w/Detroit Locker Alcans All Around 38x15.5 SSR's HAD Front Shaft 14" Bilsteins F&R

11-17-2005, 06:59 PM	#5 (permalink)
MNBen Registered User Join Date: Oct 2001 Member # 7711 Location: Burnsville MN Posts: 606	Full set of 79 Ford (35 spline outers) with the inners custom length. The driver side is 2.5 inches narrower than stock and the passenger side is 3" narrower than stock. shipping to 55125 __________________ Sunset the unconstitutional USA Patriot Act!! Serious discussion makes Bubba sad -BRB

12-12-2005, 05:50 PM	#7 (permalink)
roundeye Rock God Join Date: Aug 2001 Member # 6430 Location: Placerville, CA Posts: 1,242	Free shipping from now till Dec. 24th on custom orders. Ground in the lower 48 states. Please call us and mention this on your order. __________________ Roundeyes.com OutbackToilets.com

12-14-2005, 12:07 AM	#8 (permalink)
Todd W I make websites! Join Date: Jun 2002 Member # 12429 Location: Rubicon Trail - CA Posts: 10,332 Blog Entries: 9	Hey Bruce, how's it going? What "Alloy" are these made with Thanks -Todd __________________ My 4x4 Blog Rockwell axles too!

12-21-2005, 04:34 PM	#10 (permalink)
Lowtorious Registered User Join Date: Dec 2000 Member # 2387 Location: Maryland Posts: 1,918	Please PM me for a set of '92 Dodge 35 spline inners and outers. Warn 35 spline hubs too if you carry them. Long side inner ~ 4340, 31" Short side - 4340, stock length, ~ 17" Outers - Stock length, 35 spline, 4340 Spicer u-joints. Thanks!

12-26-2005, 05:39 PM	#12 (permalink)
roundeye Rock God Join Date: Aug 2001 Member # 6430 Location: Placerville, CA Posts: 1,242	We did Free shipping today on 2 custom orders. Any others want the deal? We'll run it till the end of the year. __________________ Roundeyes.com OutbackToilets.com

12-27-2005, 08:46 PM	#13 (permalink)
RufftyTuffty Registered User Join Date: Mar 2003 Member # 17867 Location: AZ Posts: 464	Nice talking with ya Bruce. Looking forward to the 12th...if not before. ~Mike

12-29-2005, 09:27 PM	#14 (permalink)
snohman Registered User Join Date: Jan 2003 Member # 16135 Location: Rocklin Posts: 529	price for 2 D60 outer shafts..thanks

12-29-2005, 09:39 PM	#15 (permalink)
Todd W I make websites! Join Date: Jun 2002 Member # 12429 Location: Rubicon Trail - CA Posts: 10,332 Blog Entries: 9	Is it true that these are identical to the Superiors as the superior designer now designs for Alloy USA? Or is this a rumor? __________________ My 4x4 Blog Rockwell axles too!

01-10-2006, 01:00 PM	#20 (permalink)
JeffHPK5 Rock God Join Date: Apr 2005 Member # 45481 Location: Cincinnati, Nohio Posts: 1,512	Looking for a price for stock length set inner/outers GM D60 35spl. to 45252, also rear set for D70 35 spl 39.750 long to 45252. Thanks, Jeff

01-19-2006, 06:58 PM	#22 (permalink)
Blue-Beard Registered User Join Date: Sep 2001 Member # 6892 Location: Danville, CA Posts: 1,323	I saw your post about the d44 shafts got any prices on those? Outers + inners? Sorry to clutter up your d60 shaft post. __________________ Yarr! I've been to the Hammers... There in the tool section at Home Depot. Rally for The Hammers post #141 Rally for Tellico post #100

01-21-2006, 07:59 PM	#25 (permalink)
RufftyTuffty Registered User Join Date: Mar 2003 Member # 17867 Location: AZ Posts: 464	Got my new long side set AOK on Thurday....sweetness Had them together and installed in a couple of hours and went for a run Friday afternoon Thanks for the killer shafts, Mike.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode