Internal Roll Cages for Toyotas from 4x Innovations! - Pirate4x4.Com : 4x4 and Off-Road Forum

traxman25 · 12-27-2006, 07:35 PM

Updated 1/14/2010

This weld together cage kit is designed to fit tightly within your Toyota machine and provide maximum protection for the passenger compartment in the event of a roll over. Your roll cage is made from 1.75x.120 HREW or DOM tubing for all the main tubes with support tubes and gussets made of 1.5x.120 to save space and head room. Also included are 1 inch round tube handles, laser cut mounting plates for both sides of the body, and mounting hardware. Kits come ready to weld with all tubes pre-notched to fit every time and weld in place.

We've spent hundreds of hours making sure they fit like a glove and you will not get a better fit from any other vendor out there.

95.5-04 Tacomas:
Regular Cab 9IRC-R:
HREW: $449.00
DOM: $529.00

Extended Cab 10IRC-EX:
HREW: $479.00
DOM: $615.00

79-83 Pickups:
Regular Cab 1IRC:
HREW: $315.00
DOM: $375.00

84-88 Pickups:
Regular Cab 2IRC-R:
HREW: $425.00
DOM: $499.00

Extended Cab 2IRC-EX:
HREW: $455.00
DOM: $599.00

89-95 Pickups:
Regular Cab 7IRC-R:
HREW: $425.00
DOM: $499.00

Extended Cab 7IRC-EX:
HREW: $455.00
DOM: $599.00

90-95 4 Runners:
Full Length 6RIC: Ends at the tailgate
HREW: $565.00
DOM: $723.00

84-89 4 Runners:
Passenger Length 4RIC: Ends just behind the rear wheel well, at the stock roll bar mounting point.
HREW: $459.00
DOM: $599.00

Full Length 5RIC: Ends at the tailgate
HREW: $549.00
DOM: $705.00

All prices + shipping

Vehicle Spec. Notes:
84-88 Pickup:
Extended Cab Cages come with the very important x bracing for the rear most cross hoop. In the ex cab you can even keep the stock shelf after notching out the rear two corners by about 2 inches, your cage will fit THAT TIGHT!

84-89 4 Runner:
We offer two lengths of cage for this model. The Passenger Length kit covers from the Dash to the back side of the rear wheel well. The Full Length kit covers all the way back to the tail gate.

90-95 4 Runner:
Covers the full length of the 4 Runner. Front and rear mounts tie into the body mounts. There are pictures of this cage on the 5th page in post 114, and lots of pictures on our website.

We can also custom build extra pieces for you at very reasonable rates.
Please call, PM, or email us for great shipping rates. For more information please see our web site here.

Trail tested and are ready to save your ass, and your head too!

Pictures in this post: 4RIC - Passenger Length 84-89 4 Runner Roll Cage

In-cab cage kit, In-cab roll cage kit, Roll bar kit, exo cage, exo skeleton, external roll cage, internal cage kit, Toyota roll cage

USMCracing · 02-07-2007, 11:57 AM

2Gen 4Runner? 4Door, Shipping to 32244. Thanks

Steven

traxman25 · 02-07-2007, 12:10 PM

Photos in this post: 5RIC 84-89 4 Runner Full Length Cage

Note: the front portion of the 4RIC and 5RIC are the same.

Updated 2/5/2009

zidaro · 02-28-2007, 09:31 PM

Nice looking products your coming up with. Price shipped to 93546?
thanks, aaron

HANGTOWNCRUZR · 02-28-2007, 09:45 PM

Looks nice how much shipped to 95667?

traxman25 · 02-28-2007, 11:00 PM

Here's new photos of the 84-88 Pickup cage kits! For more photos visit our website here for extended cab or here for regular cab.

RANCHOLYON · 06-03-2007, 06:24 PM

how much for 88 4 runner?

traxman25 · 06-04-2007, 10:45 AM

Edit 5/20/10:

Here are some photos of the 89-95 Pickup roll cage.

jtaco1 · 06-04-2007, 11:22 AM

Planning anything for Tacomas??

traxman25 · 06-04-2007, 12:03 PM

Quote:

Originally Posted by jtaco1

Planning anything for Tacomas??

You bet, no time frame yet though.

jtaco1 · 06-04-2007, 12:21 PM

Great look forward to seeing it, I like what you have come up with thus far.

live4yotas · 06-27-2007, 04:35 PM

How do these mount to the floor of the truck? Do they go through the body to the frame or does it bolt to the floor of the cab?

live4yotas · 06-27-2007, 04:36 PM

I wrecked a tacoma with 12" of lift about 2 years ago. I rolled it side over side about 5 times. Wish I would have had on of these cages in it.

traxman25 · 06-27-2007, 08:02 PM

Quote:

Originally Posted by live4yotas

How do these mount to the floor of the truck? Do they go through the body to the frame or does it bolt to the floor of the cab?

I sent you a PM. But for everyone else's knowledge, these bolt to the floor with mounting plates on both sides of the body.

trailrunner55 · 07-01-2007, 11:09 AM

85 4runner cage shipped to 01453

traxman25 · 07-02-2007, 05:34 AM

PMed you, thanks.

jmsdad · 07-05-2007, 08:49 AM

86 4Runner cage to 94536...thanks

traxman25 · 07-05-2007, 09:11 AM

Quote:

Originally Posted by jmsdad

86 4Runner cage to 94536...thanks

PM sent, thank you!

trails250 · 07-21-2007, 07:10 PM

86 4runner cage shipped to 98311. thanks

traxman25 · 07-23-2007, 06:07 AM

Quote:

Originally Posted by trails250

86 4runner cage shipped to 98311. thanks

PM sent, THANKS!

864runner · 07-27-2007, 08:24 PM

cage for 86 4runner shipped to 93405 or 93401? Thanks

MocKKnight · 07-30-2007, 12:07 AM

runner cage shipped to 98007 business addy

traxman25 · 07-30-2007, 07:54 AM

PMs sent, Thanks!

wilco · 09-01-2007, 09:35 PM

1985extended cab cage shipped to 95452

4wheeler925 · 09-11-2007, 10:30 PM

please say you are going to make a cage for a 90-95 toyota 4runner...if so how much are your cages???? 94509 ...thanks

12-27-2006, 07:35 PM	#1 (permalink)
traxman25 4x Innovations Join Date: Sep 2004 Member # 35227 Location: Platteville, WI Posts: 2,328	Internal Roll Cages for Toyotas from 4x Innovations! Updated 1/14/2010 This weld together cage kit is designed to fit tightly within your Toyota machine and provide maximum protection for the passenger compartment in the event of a roll over. Your roll cage is made from 1.75x.120 HREW or DOM tubing for all the main tubes with support tubes and gussets made of 1.5x.120 to save space and head room. Also included are 1 inch round tube handles, laser cut mounting plates for both sides of the body, and mounting hardware. Kits come ready to weld with all tubes pre-notched to fit every time and weld in place. We've spent hundreds of hours making sure they fit like a glove and you will not get a better fit from any other vendor out there. 95.5-04 Tacomas: Regular Cab 9IRC-R: HREW: $449.00 DOM: $529.00 Extended Cab 10IRC-EX: HREW: $479.00 DOM: $615.00 79-83 Pickups: Regular Cab 1IRC: HREW: $315.00 DOM: $375.00 84-88 Pickups: Regular Cab 2IRC-R: HREW: $425.00 DOM: $499.00 Extended Cab 2IRC-EX: HREW: $455.00 DOM: $599.00 89-95 Pickups: Regular Cab 7IRC-R: HREW: $425.00 DOM: $499.00 Extended Cab 7IRC-EX: HREW: $455.00 DOM: $599.00 90-95 4 Runners: Full Length 6RIC: Ends at the tailgate HREW: $565.00 DOM: $723.00 84-89 4 Runners: Passenger Length 4RIC: Ends just behind the rear wheel well, at the stock roll bar mounting point. HREW: $459.00 DOM: $599.00 Full Length 5RIC: Ends at the tailgate HREW: $549.00 DOM: $705.00 All prices + shipping Vehicle Spec. Notes: 84-88 Pickup: Extended Cab Cages come with the very important x bracing for the rear most cross hoop. In the ex cab you can even keep the stock shelf after notching out the rear two corners by about 2 inches, your cage will fit THAT TIGHT! 84-89 4 Runner: We offer two lengths of cage for this model. The Passenger Length kit covers from the Dash to the back side of the rear wheel well. The Full Length kit covers all the way back to the tail gate. 90-95 4 Runner: Covers the full length of the 4 Runner. Front and rear mounts tie into the body mounts. There are pictures of this cage on the 5th page in post 114, and lots of pictures on our website. We can also custom build extra pieces for you at very reasonable rates. Please call, PM, or email us for great shipping rates. For more information please see our web site here. Trail tested and are ready to save your ass, and your head too! Pictures in this post: 4RIC - Passenger Length 84-89 4 Runner Roll Cage In-cab cage kit, In-cab roll cage kit, Roll bar kit, exo cage, exo skeleton, external roll cage, internal cage kit, Toyota roll cage Attached Images __________________ 4x Innovations - Adam Hardcore Toyota Rock Crawling Armor 1-608-348-4880 4xInnovations.com Like Us on Facebook! Last edited by traxman25; 01-23-2013 at 08:48 AM.

02-07-2007, 11:57 AM	#2 (permalink)
USMCracing Registered User Join Date: Jan 2003 Member # 16469 Location: Beaufort, SC Posts: 439	2Gen 4Runner? 4Door, Shipping to 32244. Thanks Steven __________________ 91 4runner SAS'd Inchworm/Marlin duals, chevies outback and stock mix rears up front, 5.29s ARB airlocker up front and detroit out back, 36" Goodyear RT II mounted to recentered humvee double beadlocks. Wheeling pics, [url]http://s127.photobucket.com/albums/p150/usmcracing/[/url] Semper Fi

02-07-2007, 12:10 PM	#3 (permalink)
traxman25 4x Innovations Join Date: Sep 2004 Member # 35227 Location: Platteville, WI Posts: 2,328	Photos in this post: 5RIC 84-89 4 Runner Full Length Cage Note: the front portion of the 4RIC and 5RIC are the same. Updated 2/5/2009 Attached Images __________________ 4x Innovations - Adam Hardcore Toyota Rock Crawling Armor 1-608-348-4880 4xInnovations.com Like Us on Facebook!

02-28-2007, 09:31 PM	#4 (permalink)
zidaro Registered User Join Date: Nov 2002 Member # 15032 Location: Mammoth Lakes, CA Posts: 659	Nice looking products your coming up with. Price shipped to 93546? thanks, aaron __________________ Mo Chi Chu '87runner

02-28-2007, 09:45 PM	#5 (permalink)
HANGTOWNCRUZR Wheeler Join Date: Feb 2000 Member # 21 Location: Placerville, CA Posts: 435	Looks nice how much shipped to 95667? __________________ David Thomas, Toys on the Rocks TLCA #1723 KJ6CXR RTF BOD /\|_,[___], \|---L(o--o) ()_)()_)--)_) 1965 FJ40

02-28-2007, 11:00 PM	#6 (permalink)
traxman25 4x Innovations Join Date: Sep 2004 Member # 35227 Location: Platteville, WI Posts: 2,328	Here's new photos of the 84-88 Pickup cage kits! For more photos visit our website here for extended cab or here for regular cab. Attached Images __________________ 4x Innovations - Adam Hardcore Toyota Rock Crawling Armor 1-608-348-4880 4xInnovations.com Like Us on Facebook! Last edited by traxman25; 01-23-2013 at 08:47 AM.

06-03-2007, 06:24 PM	#7 (permalink)
RANCHOLYON Registered User Join Date: Jan 2006 Member # 65684 Posts: 43	how much for 88 4 runner? __________________ RANCHORUNNER

06-04-2007, 10:45 AM	#8 (permalink)
traxman25 4x Innovations Join Date: Sep 2004 Member # 35227 Location: Platteville, WI Posts: 2,328	Edit 5/20/10: Here are some photos of the 89-95 Pickup roll cage. Attached Images __________________ 4x Innovations - Adam Hardcore Toyota Rock Crawling Armor 1-608-348-4880 4xInnovations.com Like Us on Facebook!

06-04-2007, 11:22 AM	#9 (permalink)
jtaco1 Granite Guru Join Date: Aug 2004 Member # 34250 Location: Marysville, PA Posts: 804	Planning anything for Tacomas?? __________________ 88 4 Runner, dual cases w/ 4.7's, Tacoma E-locker rear, 37" PB Rockers and no lift, caged

06-04-2007, 12:21 PM	#11 (permalink)
jtaco1 Granite Guru Join Date: Aug 2004 Member # 34250 Location: Marysville, PA Posts: 804	Great look forward to seeing it, I like what you have come up with thus far. __________________ 88 4 Runner, dual cases w/ 4.7's, Tacoma E-locker rear, 37" PB Rockers and no lift, caged

06-27-2007, 04:35 PM	#12 (permalink)
live4yotas Registered User Join Date: Jun 2007 Member # 93976 Location: Mobile Alabama Posts: 39	How do these mount to the floor of the truck? Do they go through the body to the frame or does it bolt to the floor of the cab?

06-27-2007, 04:36 PM	#13 (permalink)
live4yotas Registered User Join Date: Jun 2007 Member # 93976 Location: Mobile Alabama Posts: 39	I wrecked a tacoma with 12" of lift about 2 years ago. I rolled it side over side about 5 times. Wish I would have had on of these cages in it.

07-01-2007, 11:09 AM	#15 (permalink)
trailrunner55 Registered User Join Date: Dec 2005 Member # 64272 Location: leomister,ma Posts: 420	85 4runner cage shipped to 01453 __________________ [QUOTE=evil69;9959175]Chris Hanson is a cockblocker![/QUOTE] [QUOTE=southernfriedcj8;10653828]If I only got 3 blow jobs per year I'd learn to suck my own dick.:shaking:[/QUOTE] :flipoff2:

07-02-2007, 05:34 AM	#16 (permalink)
traxman25 4x Innovations Join Date: Sep 2004 Member # 35227 Location: Platteville, WI Posts: 2,328	PMed you, thanks. __________________ 4x Innovations - Adam Hardcore Toyota Rock Crawling Armor 1-608-348-4880 4xInnovations.com Like Us on Facebook!

07-05-2007, 08:49 AM	#17 (permalink)
jmsdad Registered User Join Date: Mar 2002 Member # 10501 Location: Fremont, CA Posts: 433	86 4Runner cage to 94536...thanks

07-21-2007, 07:10 PM	#19 (permalink)
trails250 Registered User Join Date: Nov 2004 Member # 38592 Location: bremerton WA Posts: 173	86 4runner cage shipped to 98311. thanks

07-27-2007, 08:24 PM	#21 (permalink)
864runner Registered User Join Date: Oct 2006 Member # 80876 Location: Santa Margarita, CA Posts: 31	cage for 86 4runner shipped to 93405 or 93401? Thanks

07-30-2007, 12:07 AM	#22 (permalink)
MocKKnight Registered User Join Date: Dec 2004 Member # 40232 Location: Seattle, Wa Posts: 32	runner cage shipped to 98007 business addy __________________ Yota fo LIFE!

07-30-2007, 07:54 AM	#23 (permalink)
traxman25 4x Innovations Join Date: Sep 2004 Member # 35227 Location: Platteville, WI Posts: 2,328	PMs sent, Thanks! __________________ 4x Innovations - Adam Hardcore Toyota Rock Crawling Armor 1-608-348-4880 4xInnovations.com Like Us on Facebook!

09-01-2007, 09:35 PM	#24 (permalink)
wilco Registered User Join Date: Jan 2007 Member # 85007 Location: sonoma county, ca Posts: 441	1985extended cab cage shipped to 95452

09-11-2007, 10:30 PM	#25 (permalink)
4wheeler925 Registered User Join Date: Feb 2005 Member # 43537 Location: antioch,ca Posts: 107	please say you are going to make a cage for a 90-95 toyota 4runner...if so how much are your cages???? 94509 ...thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode