Under Cover Fabworks High Clearance Skid Plates

[undercoverfab]

Under Cover Fabworks offers many great choices in belly protection for the Jeep TJ and YJ. We offer skid plates in both steel and 6061-T6 aluminum plate. Steel skids are offered in 3/16" and 1/4" plate. Aluminum versions are offered in 1/4" and 3/8" plate. We offer skid plates for everyone from the stock, "No Body-Lift" rig to the "Ultra High-Clearance" version that requires a body lift to keep the transfer case out of the tub.

We also have a line of engine skids that complement our transfer case skids. They provide coverage from the front of the oil pan sump to the transfer case output. The are offered in both 1/4" steel plate or 1/4" 6061-T6 aluminum plate.

Pricing on all of these products is much lower than you may expect. Please take a moment to visit the website and see if we have anything you need!

Here is a link the the transfer case skids:
http://www.undercoverfab.com/5-trans...se-skid-plates

Engine Skids:
http://www.undercoverfab.com/33-engine-skids

[Haz-Mat 1]

Bump for a great Vendor.
Had a slight mishap in shipping due to the treatment of the package. UCF got the stuff I was missing. These guys have some great stuff, with even better pricing.
HM

[undercoverfab]

This was posted over in the Vendor Display, but I will copy it here for everyone's benefit.

We have a surplus of a few different models of our Transfer Case Skid Plates. Because we like to sell parts and not let them sit around for too long I am going to reduce the price on these models by an additional 10%. You can save a total of 20% off the regular price when you use the "PIRATE4X4.COM" coupon.

The discounted Transfer Case Skid models are as follows:

'03-'06 Original "Extra-Clearance" (2" Deep)- 1/4" Carbon Steel
Under Cover Fabworks, LLC - '03-'06 TJ/LJ Transfer Case Skid Plate (Extra-Clearance)(Carbon Steel)

Take a look. Maybe this is the chance you've been waiting around for.

Thanks,

[undercoverfab]

The only model we have left on temporary mark-down is the LATE model ('03-'06) 2" Deep 1/4" Carbon Steel skid.

[undercoverfab]

Only a couple left at this price.

Thanks,

[undercoverfab]

One more LATE model 1/4" thick carbon steel "Extra-Clearance" skid plate left on a 10% off temporary markdown.

[DesertR]

Great product, great service, fast delivery!

[undercoverfab]

Thanks for the continued support. Please come by the website and see if we have anything you could use.

Thanks,

[Zybeon]

Was looking over your site to price up a 03+ Deep cover skid system and it shows as the coupon as being expired.

Also is your skid-skin going to go into production soon? Would I be able to get my hands on one of those and be a tester?

[undercoverfab]

The skid-skin is still in the testing phase.

The pirate discount code is "pirate4x4.com".

Thanks,

[merkchop]

Was looking at ordering your Deep-Cover Skid Plate System with Ultra High Clearance transfer case skid. Will this skid work with a long arm suspension or will the skid need to modified?
Don't have the LA upgrade yet, but will soon so wanted to plan ahead.
Thanks

[undercoverfab]

Originally Posted by merkchop

Was looking at ordering your Deep-Cover Skid Plate System with Ultra High Clearance transfer case skid. Will this skid work with a long arm suspension or will the skid need to modified?
Don't have the LA upgrade yet, but will soon so wanted to plan ahead.
Thanks

What kinda long arm kit?

[merkchop]

Had someone that was going to make me a good deal on the RC kit, but not 100% sure just yet.
I will need to go with a bolt on kit as I don't know how to weld (gotta get that taken care of). Does it make a difference and if so why?

[undercoverfab]

Originally Posted by merkchop

Had someone that was going to make me a good deal on the RC kit, but not 100% sure just yet.
I will need to go with a bolt on kit as I don't know how to weld (gotta get that taken care of). Does it make a difference and if so why?

Yeah, some kits won't work without trimming the skid. *I know RC is one of them.

[merkchop]

Sounds good. Do I need to give you a call of PM for best price or just go to the website and put in the pirate discount?
Want to look around on the site and see if I need anything else before ordering.
Thanks
Michael

[undercoverfab]

Originally Posted by merkchop

Sounds good. Do I need to give you a call of PM for best price or just go to the website and put in the pirate discount?
Want to look around on the site and see if I need anything else before ordering.
Thanks
Michael

The pirate code will get you the best deal going.

[merkchop]

UCF Deep-Cover Skid Plate System
UCF Deep-Cover Skid Plate System
Option A : Early TJ ('97-'02), Option F : No Body-Lift or Motor-Mount Lift, Option D : Carbon Steel Engine Skid, Option E : No Transmission Mount Included, Option C : Ultra High-Clearance, Option B : 1/4" Carbon Steel Plate, Option G : Do Not Add The Exo-Skid
This is what I am planning on ordering (copy/paste from my cart on your site).
Is this in stock and ready to ship? If not what is the delay time on it?

I plan on ordering in the next day or so.
Thanks.

[undercoverfab]

Originally Posted by merkchop

UCF Deep-Cover Skid Plate System
UCF Deep-Cover Skid Plate System
Option A : Early TJ ('97-'02), Option F : No Body-Lift or Motor-Mount Lift, Option D : Carbon Steel Engine Skid, Option E : No Transmission Mount Included, Option C : Ultra High-Clearance, Option B : 1/4" Carbon Steel Plate, Option G : Do Not Add The Exo-Skid
This is what I am planning on ordering (copy/paste from my cart on your site).
Is this in stock and ready to ship? If not what is the delay time on it?

I plan on ordering in the next day or so.
Thanks.

Yep, in stock and can ship next week.

Thanks,

[merkchop]

Just placed my order and payed through PayPal. Now just looking forward to getting it all in and on my Jeep.
Thanks

[VTcivil]

interested in the Ford dana 60 front truss. Is there a Pirate discount code?

[merkchop]

Originally Posted by VTcivil

interested in the Ford dana 60 front truss. Is there a Pirate discount code?

From post #10, the discount code good for 10% is:

pirate4x4.com

This code works and is the one that I used.

[NoTraffic]

Matt,

I purchased second hand an ultimate high clearance skid from a buddy and wanted to make it work with my set-up (06 rubicon with auto). I know you do not recommend these for that powertrain combo. I have an 1.25" body lift and 1" MML and the only way i could mount it was with removing the factory trans mount. Is there anyway that a low pro mount could be used here or will i be forced to do some other mods to make the skid work. If the latter do you have any ideas besides increasing body lift or raising t-case any higher...its maxed out. Thanks in advance

[undercoverfab]

Originally Posted by NoTraffic

Matt,

I purchased second hand an ultimate high clearance skid from a buddy and wanted to make it work with my set-up (06 rubicon with auto). I know you do not recommend these for that powertrain combo. I have an 1.25" body lift and 1" MML and the only way i could mount it was with removing the factory trans mount. Is there anyway that a low pro mount could be used here or will i be forced to do some other mods to make the skid work. If the latter do you have any ideas besides increasing body lift or raising t-case any higher...its maxed out. Thanks in advance

The only way to make that work without more BL is to cut the front lip off the skid just below the transmission pan and install my LOPRO mount.

Thanks,

[NoTraffic]

Originally Posted by undercoverfab

The only way to make that work without more BL is to cut the front lip off the skid just below the transmission pan and install my LOPRO mount.

Thanks,

Awesome...ill get it ordered through the site

[solar1]

Any plans for a July 4th sale? I have been eyeballing the 1/4" steel engine skid for an 01 TJ.