Nova Scotia Jeep Jam - Pirate4x4.Com : 4x4 and Off-Road Forum

Caper · 06-21-2012, 08:29 AM

Nova Scotia JeepJam is an annual event held in early June in Annapolis Valley, Nova Scotia. We have very open land access laws and tons of great terrain from granite rock runs to bottomless peat. Lots of variety.

Here's some pics from 'the Quarry' at the Nova Scotia Jeep Jam......Thx Lance Riswold for getting access to this area and establishing the trail.

Pics by Jan MacLean (op) and Scott Eldridge.

CreepyLJ getting a feel

Al in the CJ5 on Toys.

Diane in her Rubi

Scott trying out the new build. JK arms and not much lift. SuperService Swampers.

first stuck, had to be me.

Lance spotting Scottie over a big one. War is hell! ;D

Al flexin'

walks the hard line

Caper · 06-21-2012, 08:30 AM

Big6 and Beth

Bernie and Melissa, They are from down Antigonish. 4.0/T18

Bernie is lovin' that T18.....first time crawling!

Bill Clarke humping his donkey over a tight squeeze.

The trail winds around a cut, lots of rigs, didn't get pics of all.

Ted and Melanie from Nat'l 4x4 in NB always run this one with us.
4.0 stroker/auto/D44/8.8 and some pretty nice fancy Irocs.

MFR - the most with the least. 2" sacked out lift/lockrites/34" SS swampers

Al gettin' it on the 'LOG of FLEXABILITY'

ooohhhh yeah!

Caper · 06-21-2012, 08:31 AM

Scottie trys out the log

CreepyLJ keepin' up.

Ken working a bonus round, I winched him out.

A couple from NB. Guy, maybe? Sorry, bad with names. Nice capable TJ tho.

Caper · 06-21-2012, 08:32 AM

Big6 leading the Skittles CJ's

Beth

Bernie and Melissa up again....

gets a little hung up

Some Hi-lift action and he is on his way

Ted gets a little goobered up in the same spot, and in trying to get out, gets trapped.

Leaf hanger pushing on a rock traps him. Stack some rocks and Hi-lift and he's out

I didn't get pics of 1/2 the rigs running the trail!
Brent, Ray, Chris, +++. I was up the front.

Brent

Caper · 06-21-2012, 08:37 AM

Chris

CVO Ray

Overextended slip spline, SuperKev pops it back in

Steven's pretty ( ;D ) CJ.

SuperKev being Classy.

Always a great time on this trail.

Check out our forum - if you get hit for a password, use 'locker'
http://nsjc.proboards.com/index.cgi

fab section, lots of buggies. Even tho we are a Jeep Club, the forum is the defacto site for most of the wheeling in the province.
http://nsjc.proboards.com/index.cgi?board=fab

Thx for looking!

Jan MacLean
CreepyCNC

06-21-2012, 08:29 AM	#1 (permalink)
Caper Wheeler Join Date: Apr 2007 Member # 89483 Location: Dartmouth, NS, Canada Posts: 224	Nova Scotia Jeep Jam Nova Scotia JeepJam is an annual event held in early June in Annapolis Valley, Nova Scotia. We have very open land access laws and tons of great terrain from granite rock runs to bottomless peat. Lots of variety. Here's some pics from 'the Quarry' at the Nova Scotia Jeep Jam......Thx Lance Riswold for getting access to this area and establishing the trail. Pics by Jan MacLean (op) and Scott Eldridge. CreepyLJ getting a feel Al in the CJ5 on Toys. Diane in her Rubi Scott trying out the new build. JK arms and not much lift. SuperService Swampers. first stuck, had to be me. Lance spotting Scottie over a big one. War is hell! ;D Al flexin' walks the hard line __________________ 'lil mill/old Southbend/homemade bender/BullTear CNC plasma table w PM45

06-21-2012, 08:30 AM	#2 (permalink)
Caper Wheeler Join Date: Apr 2007 Member # 89483 Location: Dartmouth, NS, Canada Posts: 224	Big6 and Beth Bernie and Melissa, They are from down Antigonish. 4.0/T18 Bernie is lovin' that T18.....first time crawling! Bill Clarke humping his donkey over a tight squeeze. The trail winds around a cut, lots of rigs, didn't get pics of all. Ted and Melanie from Nat'l 4x4 in NB always run this one with us. 4.0 stroker/auto/D44/8.8 and some pretty nice fancy Irocs. MFR - the most with the least. 2" sacked out lift/lockrites/34" SS swampers Al gettin' it on the 'LOG of FLEXABILITY' ooohhhh yeah! __________________ 'lil mill/old Southbend/homemade bender/BullTear CNC plasma table w PM45 Last edited by Caper; 06-21-2012 at 08:45 AM.

06-21-2012, 08:31 AM	#3 (permalink)
Caper Wheeler Join Date: Apr 2007 Member # 89483 Location: Dartmouth, NS, Canada Posts: 224	Scottie trys out the log CreepyLJ keepin' up. Ken working a bonus round, I winched him out. A couple from NB. Guy, maybe? Sorry, bad with names. Nice capable TJ tho. __________________ 'lil mill/old Southbend/homemade bender/BullTear CNC plasma table w PM45

06-21-2012, 08:32 AM	#4 (permalink)
Caper Wheeler Join Date: Apr 2007 Member # 89483 Location: Dartmouth, NS, Canada Posts: 224	Big6 leading the Skittles CJ's Beth Bernie and Melissa up again.... gets a little hung up Some Hi-lift action and he is on his way Ted gets a little goobered up in the same spot, and in trying to get out, gets trapped. Leaf hanger pushing on a rock traps him. Stack some rocks and Hi-lift and he's out I didn't get pics of 1/2 the rigs running the trail! Brent, Ray, Chris, +++. I was up the front. Brent __________________ 'lil mill/old Southbend/homemade bender/BullTear CNC plasma table w PM45 Last edited by Caper; 06-21-2012 at 08:46 AM.

06-21-2012, 08:37 AM	#5 (permalink)
Caper Wheeler Join Date: Apr 2007 Member # 89483 Location: Dartmouth, NS, Canada Posts: 224	Chris CVO Ray Overextended slip spline, SuperKev pops it back in Steven's pretty ( ;D ) CJ. SuperKev being Classy. Always a great time on this trail. Check out our forum - if you get hit for a password, use 'locker' http://nsjc.proboards.com/index.cgi fab section, lots of buggies. Even tho we are a Jeep Club, the forum is the defacto site for most of the wheeling in the province. http://nsjc.proboards.com/index.cgi?board=fab Thx for looking! Jan MacLean CreepyCNC __________________ 'lil mill/old Southbend/homemade bender/BullTear CNC plasma table w PM45 Last edited by Caper; 06-21-2012 at 08:47 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode