246 241 swap, has 1st and 2nd but no 3rd or 4th - Pirate4x4.Com : 4x4 and Off-Road Forum

willnegus · 04-18-2012, 06:19 AM

i have a 2000 tahoe sas'd that came with a 246 swapped it to a 241 with a 4l60, ran the blk/grey pin f7 wire to ground with a switch and wired the vss on the tail shaft to the same color coded wires on the harness , does'nt matter if its in 2 hi 4 low or 4 hi it will shift from 1st to 2nd then when it shifts into 3rd seems like it goes in neutral, PLEASE HELP

trkklr77 · 04-18-2012, 05:35 PM

wtf does the tcase have to do with the tranny controls/not shifting?

willnegus · 04-19-2012, 05:34 PM

because i did the 241 swap

Btempy · 04-19-2012, 06:40 PM

If its anything like mine. The vss should be the green/purple.
and the f7 wiring and all that should only effect shifting in 4x4 4l.
Best bet would be the VSS

04-18-2012, 06:19 AM	#1 (permalink)
willnegus Registered User Join Date: Apr 2010 Member # 158118 Posts: 12	246 241 swap, has 1st and 2nd but no 3rd or 4th i have a 2000 tahoe sas'd that came with a 246 swapped it to a 241 with a 4l60, ran the blk/grey pin f7 wire to ground with a switch and wired the vss on the tail shaft to the same color coded wires on the harness , does'nt matter if its in 2 hi 4 low or 4 hi it will shift from 1st to 2nd then when it shifts into 3rd seems like it goes in neutral, PLEASE HELP

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-18-2012, 05:35 PM	#2 (permalink)
trkklr77 Banned Join Date: Apr 2004 Member # 29016 Location: galt ca, because i wanted my own backyard Posts: 15,354	wtf does the tcase have to do with the tranny controls/not shifting?

04-19-2012, 05:34 PM	#3 (permalink)
willnegus Registered User Join Date: Apr 2010 Member # 158118 Posts: 12	because i did the 241 swap

04-19-2012, 06:40 PM	#4 (permalink)
Btempy Registered User Join Date: Mar 2012 Member # 215239 Location: Virginia Beach, VA Posts: 31	If its anything like mine. The vss should be the green/purple. and the f7 wiring and all that should only effect shifting in 4x4 4l. Best bet would be the VSS