Driveshaft hardware - Pirate4x4.Com : 4x4 and Off-Road Forum

Hosscat_C-10 · 10-16-2004, 03:34 PM

I know this will probably be moved to the newbie forum, but does anyone know whwere to find or what to use in place of the hardware used to mount the front driveshaft on my 1979 k10 1/2 ton. It has a 350 and 4 spd. bulldog tranny with what i believe is the np205 trasfercase and the stock axles. It has a four bolt pattern and the holes are spaced about three inches apart in a square.

This is my first truck so please cut me some slack. Thanks.

big83chevy4x4 · 10-16-2004, 07:35 PM

a hardware store

i believe they are a 7/16" bolt (5/8" head) 1" long.

10-16-2004, 03:34 PM	#1 (permalink)
Hosscat_C-10 Registered User Join Date: Oct 2004 Member # 36522 Location: Goshen, KY Posts: 23	Driveshaft hardware I know this will probably be moved to the newbie forum, but does anyone know whwere to find or what to use in place of the hardware used to mount the front driveshaft on my 1979 k10 1/2 ton. It has a 350 and 4 spd. bulldog tranny with what i believe is the np205 trasfercase and the stock axles. It has a four bolt pattern and the holes are spaced about three inches apart in a square. This is my first truck so please cut me some slack. Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-16-2004, 07:35 PM	#2 (permalink)
big83chevy4x4 Registered User Join Date: Jan 2004 Member # 25738 Location: sheridan, mi Posts: 121	a hardware store i believe they are a 7/16" bolt (5/8" head) 1" long.