chevy TBI tunning? - Pirate4x4.Com : 4x4 and Off-Road Forum

carslut · 02-13-2006, 12:55 PM

is it possible to buy something to allow me to retune my TBI system? i have a realy solid setup but w/ a off the shelf chip my rig runs like poop..... i have had a few dyno runs and so far im best off all around w/ my oem chip... any aftermakret chip starts off ok.. then gets richer and richer like silly rich...... i dont want this..... i was hoping to find some where that offers cracked sofwar i can use to burn my own chips or something and tune my TBI..... i did this on a vw i had and it worked great once i got eveything up and runing. i hope chevy stuff is easyer!

thanks!

oh im trying to tune a 1990 suburban w/ a 350 and TBI injectons.....

thanks!

MrWillys · 02-13-2006, 01:52 PM

www.tunercat.com Easy to use bin editor...
www.moates.net Supply of adapters, chips, and other free software.http://www.xtronics.com/memory/EPROM.htm Chip burner
http://www.akmcables.com/ Cable to connect laptop to ALDL port
http://www.ttspowersystems.com/diagnostic.htm Recording software can be used 20 times for free, and you can purchase from AKM Electronics also
Good luck, this is the way to do it. I work with guys on TPI, but don't get involved in TBI. I've got a guy using a 7730 ecm with a 468 big block. He sends me data recordings, and I adjust his bin file accordingly. Most for profit guys don't have time to do it right, so do it yourself.

02-13-2006, 12:55 PM	#1 (permalink)
carslut plasma dust huffer Join Date: Jan 2004 Member # 25823 Location: USA Posts: 1,855	chevy TBI tunning? is it possible to buy something to allow me to retune my TBI system? i have a realy solid setup but w/ a off the shelf chip my rig runs like poop..... i have had a few dyno runs and so far im best off all around w/ my oem chip... any aftermakret chip starts off ok.. then gets richer and richer like silly rich...... i dont want this..... i was hoping to find some where that offers cracked sofwar i can use to burn my own chips or something and tune my TBI..... i did this on a vw i had and it worked great once i got eveything up and runing. i hope chevy stuff is easyer! thanks! oh im trying to tune a 1990 suburban w/ a 350 and TBI injectons..... thanks! __________________ *Duramax and LS based motor tuning* Offering in House Custom CNC Plasma cutting services, we can take your idea from design to your doorstep. have a sketch you want to become parts for your project? pm me, i can help. parts are shipping out daily "it makes the mach5 look like a vagina" - ARCHER

02-13-2006, 01:52 PM	#2 (permalink)
MrWillys Registered User Join Date: Feb 2002 Member # 9991 Location: Cold Springs, NV Posts: 2,343	www.tunercat.com Easy to use bin editor... www.moates.net Supply of adapters, chips, and other free software.http://www.xtronics.com/memory/EPROM.htm Chip burner http://www.akmcables.com/ Cable to connect laptop to ALDL port http://www.ttspowersystems.com/diagnostic.htm Recording software can be used 20 times for free, and you can purchase from AKM Electronics also Good luck, this is the way to do it. I work with guys on TPI, but don't get involved in TBI. I've got a guy using a 7730 ecm with a 468 big block. He sends me data recordings, and I adjust his bin file accordingly. Most for profit guys don't have time to do it right, so do it yourself. __________________ [url]www.scotthansen.net[/url]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode