32 spline sm465 to 203 - Pirate4x4.Com : 4x4 and Off-Road Forum

74k20 · 10-09-2006, 02:26 AM

I have an sm465 with the long 32 spline output and the np 208 adapter. I also have a 203 (doubler) with the 32 spline input. I am wondering if anyone has mated these two and if so how much spline engagement there is between trans and t-case. Also, when it comes to drilling the 203 and tapping it to the 6 bolt circular pattern of the 208 adapter do any of the 203 bolts carry over to the new pattern or is it just a matter of indexing based on the shaft and drilling from that?

Any input from somebody who has done this would be appreciated. Thanks.

u2slow · 10-09-2006, 08:06 AM

Ask Rene (tRustyK5). The NV4500/203 is the exact same process.

http://coloradok5.com/forums/showthread.php?t=186315

465/208 adapter & 203

10-09-2006, 02:26 AM	#1 (permalink)
74k20 Registered User Join Date: Jan 2006 Member # 66486 Location: SLO, CA Posts: 39	32 spline sm465 to 203 I have an sm465 with the long 32 spline output and the np 208 adapter. I also have a 203 (doubler) with the 32 spline input. I am wondering if anyone has mated these two and if so how much spline engagement there is between trans and t-case. Also, when it comes to drilling the 203 and tapping it to the 6 bolt circular pattern of the 208 adapter do any of the 203 bolts carry over to the new pattern or is it just a matter of indexing based on the shaft and drilling from that? Any input from somebody who has done this would be appreciated. Thanks.

10-09-2006, 08:06 AM	#2 (permalink)
u2slow Registered User Join Date: Apr 2001 Member # 4243 Location: Salt Spring Island, BC Posts: 3,068	Ask Rene (tRustyK5). The NV4500/203 is the exact same process. http://coloradok5.com/forums/showthread.php?t=186315 465/208 adapter & 203 __________________ 90-93 CTD jalopies

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode