![]() |
![]() |
|
|
#1 (permalink) |
|
Registered User
|
Well I got my blazer running. Now I want to hook up the water temp guage.. It's never been hooked up so I figure while I am at it I will hook it up. I like to know how warm it is running exspecially a 400 SB.
My question is what color is the Temp Guage wire under the hood? It is a 77 K-5. I seen the guage go all the way up so I shut it off and looked for wires grounding out. I found a green wire.. Would this be the wire to hook up? Thanks! Chris M
__________________
87 Suzuki Samurai 4x4, Stock motor, Toy P/S, Transmission, 4:16:1 t-case, Dana 44's f/r. SPOA w/YJ springs. 35" Boggers. |
|
|
|
|
|
#2 (permalink) |
|
Registered User
|
It is the green wire...
I had to look at my truck to make sure.. <IMG SRC="smilies/bounce2.gif" border="0"> I have a SB400 and I have a 180 temp thermostat in it, the book calls for a 195 but I don't like that. I have a guage in the head on the drivers side and the temp coming out of the motot at that point never gets over 200 and that's pulling a load.. Average is 190.. Make sure that you keep that motor cool, the heads on a 400 like to crack when you over heat them.. Good luck..
__________________
[B]Chicks dig body Damage...[/B] 74 Chevy Fullsize, 39.5 Irocs, D60/FF14bolt, Locked, Lifted, Stroked, Fuel Injected, Hydro assist. with lot's of body damage... |
|
|
|
| Sponsored Links |
|
|
#3 (permalink) |
|
Registered User
|
Appreciate it man! I will be glad to have the temp guage working. I hate not knowing what is going on. I need to pick up a cooler thermostat as well.
Thanks, Chris M
__________________
87 Suzuki Samurai 4x4, Stock motor, Toy P/S, Transmission, 4:16:1 t-case, Dana 44's f/r. SPOA w/YJ springs. 35" Boggers. |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|