My p40 warhawk project... - Page 3 - Pirate4x4.Com : 4x4 and Off-Road Forum

HEAVY METAL · 06-30-2009, 08:25 AM

Quote:

Originally Posted by t_and_a6

LOL pulls out everything xcept my stuck burb at KOTP! I thought for sure you had it though!!
I never had the chance to take a close look at your trazer/whatever it is now, but, DAMNIT!!!! I thought I was being original but I built the EXACT same sliders, even down to the damn smiley face!!!!!(time to get out the grinder and make it a mad face! only thing different is I put fat man step bars (for me and the wife was preggers) on them and ran them full length to t in an exo (eventually).
I like it though, eventually I'm wanting to do alot of the same things just spent my $$ in different areas so far!

badass foo

you were STUCK ..yo.

for real eh? great minds think alike?

Kali-K10 · 06-30-2009, 12:34 PM

Quote:

Originally Posted by HEAVY METAL

k.. lets see if i can answer this..lol

i ruined the first body so had too do soemthing, a very good friend offered me his old cab and clip . once you wheel full convert you cant go back too cab. there is a bench seat so the three of us fit fine. the cage is very well tieed into the cab...i can open and close both doors when im flexed...try doin that with a cab..

. the seperate box is great for keeping our dogs and camping gear seperate from us. did i answer all of em???

Hey as long as you got a legitimate reason, Ill let it fly haha.

Keep the pics comin.

glenns89 · 07-01-2009, 11:09 AM

do you have any more pics and/or info on the full convert windshield frame swap? I have a full convert windshield frame and a half convert blazer that needs to have no top.

Highrolleres · 07-01-2009, 06:19 PM

http://www.coloradok5.com/full-conve...nversion.shtml

Kali-K10 · 07-01-2009, 08:01 PM

Quote:

Originally Posted by glenns89

do you have any more pics and/or info on the full convert windshield frame swap? I have a full convert windshield frame and a half convert blazer that needs to have no top.

Just finish the bitch and lets go off roading.

reddwarf · 07-02-2009, 08:46 AM

Not bad for a canadian

Cool thread

HEAVY METAL · 07-06-2009, 08:18 AM

Quote:

Originally Posted by reddwarf

Not bad for a canadian

Cool thread

thanks eh!

did some more work too her this weekend..i'll post pics a lil later

HEAVY METAL · 07-06-2009, 09:28 AM

well you guys gave me some motivation..went too work on her this weekend...

what better way too remove a box then grind off the bolt heads...

last shot of how she used too look...

and gone...

my supervisor...

trucks never looked so good...

HEAVY METAL · 07-06-2009, 09:35 AM

gas tank is out and too be moved into the " box

what ya'll think of my " soft ride" lift block?

rusty back body mounts...wont be needing these anyways...

thats where i had my trailer hitch mounted too which i used as a two point. one too many hard pulls im geussin..

gonna chop it off right after the hanger..

this is safe right?...right?

makin some progress...

the " soft ride" block system worked so well i thought i'd add another...

now i have too finish this stupid thing we call work so i can work on her some more

Overdosed · 07-06-2009, 10:59 AM

I think if you used model glue instead of Ujoints it would be even softer

reddwarf · 07-07-2009, 12:36 PM

Quote:

Originally Posted by HEAVY METAL

what better way too remove a box then grind off the bolt heads...

I've done that before, it SUCKED. After that I bought O/A torch

HEAVY METAL · 07-07-2009, 02:11 PM

Quote:

Originally Posted by Overdosed

I think if you used model glue instead of Ujoints it would be even softer

good call.. gonna try that tonite

HEAVY METAL · 07-07-2009, 02:12 PM

Quote:

Originally Posted by reddwarf

I've done that before, it SUCKED. After that I bought O/A torch

i dont know what my final plans are so i didnt want too ruin the box.

t_and_a6 · 07-10-2009, 10:22 PM

Quote:

Originally Posted by reddwarf

Not bad for a canadian

Cool thread

Take off-eh! Ya hoser!

Try mounting those flip brackets an inch forward, especially if you're not gonna have any weight in the back. I did it in the burb and it made an awesome rear shackle angle, had to downgrade to some belltech 6" shackles for now (but for 20 bucks they'll work untill I build some good ones) Makes the ass ride like a cadilac versus tank. Straight up and down shackles suck no matter what vehicle they're in!
Oh and your rig still kicks ass!

spidr · 07-10-2009, 10:29 PM

You should fix that broken leaf eh.

Truck would look better with some 49s.

llvllaximus · 07-10-2009, 10:33 PM

That bottom leaf bent?
Edit:beat me to it lol, sick rig

chevyforlife502 · 07-11-2009, 07:02 AM

Great build bro nice work, and great shots with the wife eh.

HEAVY METAL · 07-13-2009, 02:27 PM

thanks guys.. i fixed the photbucket acct, pirate crashed my bandwidth..lol.

spiodr.. yeah the 40's just arnt cuttin it no more.

LegendKiller89 · 07-13-2009, 05:48 PM

Awesome rig. I love the way you designed it. And the paint job just fucking rules man.

HEAVY METAL · 08-24-2009, 08:58 AM

Quote:

Originally Posted by LegendKiller89

Awesome rig. I love the way you designed it. And the paint job just fucking rules man.

thank you sir, greatly appreciated.

well i threw the box back on and went campin too test out the new rear suspension..and as many of you saw in my other thread it maybe that wasnt such a good idea..lol..

at the lake...

then that eveining...

the shackle carnage..

so i ordered some new shackles form ORD....BEEF let em tell ya, dont think i'll ever have a problem with these...

got the carnaged one out....

HEAVY METAL · 08-24-2009, 09:01 AM

and new parts in.. goota like new bling...yo

and this one's for you B... thanks for the shackles so damn fast!

HEAVY METAL · 09-02-2009, 04:25 PM

well.. carrying on with the p40 warhawk/ fighter plane theme.. i made rockets outta my rock sliders...

dare too be diferent.. i need remove before flight tags...

Unregistered · 09-09-2009, 04:57 PM

Why is your cage tubing dented so much and look like exhaust pipe?

HEAVY METAL · 09-10-2009, 01:02 PM

Quote:

Originally Posted by Unregistered

Why is your cage tubing dented so much and look like exhaust pipe?

once again...... because i was using a shitty bender...

.. could have answered that urself no?

pennsylvaniaboy · 09-10-2009, 01:33 PM

so i guess no problems tieing the cage to the windshield frame yet?

07-01-2009, 11:09 AM	#53 (permalink)
glenns89 Mr Mom Join Date: Jul 2007 Member # 94897 Location: rancho cucamonga, so cal Posts: 1,595	do you have any more pics and/or info on the full convert windshield frame swap? I have a full convert windshield frame and a half convert blazer that needs to have no top. __________________ 89 jimmy D60/ff14bolt/400/203/205. Detroit rear, open front for now.

07-02-2009, 08:46 AM	#56 (permalink)
reddwarf Registered User Join Date: Jun 2001 Member # 5306 Location: Melrose Fla Posts: 2,134	Not bad for a canadian Cool thread __________________ "I'm ridin like a felon" -- Doug

07-10-2009, 10:29 PM	#65 (permalink)
spidr Karnage Join Date: Oct 2005 Member # 55444 Location: Vancouver Island Posts: 7,951	You should fix that broken leaf eh. Truck would look better with some 49s. __________________ Thanks to BAILEIGH INDUSTRIAL Krush RT IFS/IRS Thanks to Epic Polymer Fox Kustoms Inc Pathmaker Productions[/color] https://www.facebook.com/KrushRacing

07-10-2009, 10:33 PM	#66 (permalink)
llvllaximus Registered User Join Date: Oct 2006 Member # 80531 Location: Oregon Posts: 19	That bottom leaf bent? Edit:beat me to it lol, sick rig __________________ 88 Samurai Last edited by llvllaximus; 07-10-2009 at 10:34 PM.

07-11-2009, 07:02 AM	#67 (permalink)
chevyforlife502 Registered User Join Date: Nov 2008 Member # 123509 Location: Windsor, Canada Posts: 483 Blog Entries: 1	Great build bro nice work, and great shots with the wife eh. __________________ 1979 Chevy K10 4x4 soon to be 4inch lift with DANA 60 14FF, 205

07-01-2009, 06:19 PM	#54 (permalink)
Highrolleres Rock God Join Date: Mar 2009 Member # 131536 Location: stuck in Jersey Posts: 1,376	http://www.coloradok5.com/full-conve...nversion.shtml

07-06-2009, 09:28 AM	#58 (permalink)
HEAVY METAL Registered User Join Date: Jun 2009 Member # 137644 Location: maple ridge bc canada Posts: 734	well you guys gave me some motivation..went too work on her this weekend... what better way too remove a box then grind off the bolt heads... last shot of how she used too look... and gone... my supervisor... trucks never looked so good...

07-06-2009, 09:35 AM	#59 (permalink)
HEAVY METAL Registered User Join Date: Jun 2009 Member # 137644 Location: maple ridge bc canada Posts: 734	gas tank is out and too be moved into the " box what ya'll think of my " soft ride" lift block? rusty back body mounts...wont be needing these anyways... thats where i had my trailer hitch mounted too which i used as a two point. one too many hard pulls im geussin.. gonna chop it off right after the hanger.. this is safe right?...right? makin some progress... the " soft ride" block system worked so well i thought i'd add another... now i have too finish this stupid thing we call work so i can work on her some more

07-06-2009, 10:59 AM	#60 (permalink)
Overdosed Registered User Join Date: Jan 2009 Member # 128331 Location: Glendale Arizona Posts: 560	I think if you used model glue instead of Ujoints it would be even softer

07-13-2009, 02:27 PM	#68 (permalink)
HEAVY METAL Registered User Join Date: Jun 2009 Member # 137644 Location: maple ridge bc canada Posts: 734	thanks guys.. i fixed the photbucket acct, pirate crashed my bandwidth..lol. spiodr.. yeah the 40's just arnt cuttin it no more.

07-13-2009, 05:48 PM	#69 (permalink)
LegendKiller89 Registered User Join Date: Jan 2009 Member # 128238 Posts: 771	Awesome rig. I love the way you designed it. And the paint job just fucking rules man.

08-24-2009, 09:01 AM	#71 (permalink)
HEAVY METAL Registered User Join Date: Jun 2009 Member # 137644 Location: maple ridge bc canada Posts: 734	and new parts in.. goota like new bling...yo and this one's for you B... thanks for the shackles so damn fast! __________________ WHEELIN A P40 WARHAWK

09-02-2009, 04:25 PM	#72 (permalink)
HEAVY METAL Registered User Join Date: Jun 2009 Member # 137644 Location: maple ridge bc canada Posts: 734	well.. carrying on with the p40 warhawk/ fighter plane theme.. i made rockets outta my rock sliders... dare too be diferent.. i need remove before flight tags... __________________ WHEELIN A P40 WARHAWK

09-09-2009, 04:57 PM	#73 (permalink)
Unregistered Registered User Join Date: Nov 2001 Member # 8062 Posts: 26	Why is your cage tubing dented so much and look like exhaust pipe?

09-10-2009, 01:33 PM	#75 (permalink)
pennsylvaniaboy Fullsize wheeler Join Date: Dec 2006 Member # 83301 Location: everett, pa Posts: 2,475	so i guess no problems tieing the cage to the windshield frame yet?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode