Cv joint drive shafts - Pirate4x4.Com : 4x4 and Off-Road Forum

k5 trailblazer · 12-25-2009, 07:55 PM

I just put dual transfercases in my k5 blazer and the back of the 205 has a flat flange... Im looking for the cheapest place to get a cv joint preferability 1350 style... any help would be appreciated

Redder · 12-25-2009, 08:47 PM

the Wrecker.

Came on most stock (SA) GM front Drive shafts

chevypower · 12-26-2009, 02:05 AM

most solid axle gm's were the 1310 style saginaw cv shaft.

b454rat · 12-26-2009, 05:47 AM

Look for a 2002-up IIRC Superduty, they have 1350 CVs, and the same bolt pattern as the front flange, but need to enlarge the pilot opening. Or get a flange from High Angle.

sas'd96TAHOE · 12-27-2009, 02:03 PM

go to the junk yards. that's where i got mine. like 30 bucks i think.

12-25-2009, 07:55 PM	#1 (permalink)
k5 trailblazer Registered User Join Date: Feb 2006 Member # 67031 Location: Arizona Posts: 113	Cv joint drive shafts I just put dual transfercases in my k5 blazer and the back of the 205 has a flat flange... Im looking for the cheapest place to get a cv joint preferability 1350 style... any help would be appreciated

12-25-2009, 08:47 PM	#2 (permalink)
Redder Registered User Join Date: Dec 2006 Member # 83765 Location: Vancouver Island BC Posts: 379	the Wrecker. Came on most stock (SA) GM front Drive shafts __________________ "MAKIN HOLE"

12-26-2009, 02:05 AM	#3 (permalink)
chevypower perfection Join Date: Dec 2006 Member # 83634 Location: calgary alberta Posts: 202	most solid axle gm's were the 1310 style saginaw cv shaft. __________________ 84 K30 tubed truggy, built 454,465,208, 60-14 5.13s, 18.4x16.1 tractor tires 93 gmc big block solid axle dually tow pig 95 f250 5speed 4x4 7.3 powerstroke tow rig, 5 inch pipe 71 international 1200 4x4 slow build 97 chevy solid axle 4x4 dd

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-26-2009, 05:47 AM	#4 (permalink)
b454rat Registered User Join Date: Jan 2003 Member # 16536 Location: Binghamton, NY Posts: 2,464	Look for a 2002-up IIRC Superduty, they have 1350 CVs, and the same bolt pattern as the front flange, but need to enlarge the pilot opening. Or get a flange from High Angle.

12-27-2009, 02:03 PM	#5 (permalink)
sas'd96TAHOE Registered User Join Date: Jul 2009 Member # 138362 Location: Lake Tahoe, NV Posts: 466	go to the junk yards. that's where i got mine. like 30 bucks i think.