Dirt Riot Trail and UTV Rules 2nd drafts - Pirate4x4.Com : 4x4 and Off-Road Forum
 
Pirate4x4.Com : 4x4 and Off-Road Forum  

Go Back   Pirate4x4.Com : 4x4 and Off-Road Forum > Competition and Event Info > Competitions and Events
Notices

Reply
 
Share Thread Tools Display Modes
Old 12-16-2011, 09:50 AM   #1 (permalink)
W.E.ROCK CEO
 
Big Rich's Avatar
 
Join Date: Jan 2001
Member # 3123
Location: Blackfoot, ID (almost BFE)
Posts: 8,042
Send a message via Yahoo to Big Rich
Dirt Riot Trail and UTV Rules 2nd drafts

Dirt Riot Trail Class Rules
These rules are intended to promote a safe and fair racing environment, these classes are open ended in many aspects due in large part to allow as many already built trail rigs to compete with a minimum amount of changes. Changes to these rules may occur at anytime during the racing season, rules changes will be posted on the follow websites; werocklive.com, W.E.Rock Events facebook page, pirate4x4.com, direct contact with competitors may occur but is not guaranteed.
Stock Trail
1. Frame must be stock full frame (exception, when bobbing the rear then only can a minimum amount of frame be removed, equal to the amount of body removed), with all cross members (exception, frt. Cross member with changing to a straight axle).
2. Suspension type must remain the same as OE, per vehicle production year, make and model.
3. Any axle up-grade is allowed
4. No tire greater than 37” by sidewall listing or metric equivalent
5. Full body vehicles only, bobbing is allowed between rear axle and rear bumper, but at least 24” must remain from centerline of axle to rear of bumper, no dovetailing or boat siding allowed
6. No cutting of floor is allowed with the following exemptions. The center section of the floor is approved for cutting & rising to allow drive train clearance directly over drive train components. This does not include Drivelines, axles or axle shafts. Cutting and re-boxing for the clearance of non-suspension items, including tires, shocks and fuel tank is permitted. No boxing for clearance of springs, air-shocks, or suspension links is allowed.

Modified Trail
1. Must have body panels including hood when starting the race
2. Any suspension mod’s allowed
3. Stock or round tube chassis’s are acceptable

Both Classes
1. No By-pass type shocks allowed in mod trial, coil-over shocks are acceptable
2. 6 point cage of acceptable design and configuration, must be at least 1.5” .120 wall or greater and magnetic steel material
3. Minimum of 4 point harnesses must be used for both driver and co-driver; they must be in good shape and show no signs of wear or weather damage, condition to be decided by a Dirt riot “Official”
4. Side protection/Door bars required
5. Front mounted winch with synthetic winch line highly recommended
6. Solid roof required, magnetic metal of at least .040 or aluminum of 1/8” in thickness acceptable
7. Complete floorboard and firewall required, firewall must extend from inner side panel to opposite inner side panel, and from floorboard to engine hood.
8. Fuel cell/gas tank must be separated from passenger compartment. Fuel cells must be strapped and not flange mounted
9. Minimum 2 5lb fire extinguishers must be mounted within reach rescue personnel, and mounted in such a way as they are secure but easily accessed when needed.
10. Seats must be mounted securely to the cage or floorboards
11. All Wiring, brake lines, fuel lines and vent lines must be in good condition and secured as needed
12. Battery must be of a dry cell or gel cell construction and securely mounted with a cage, box, or over the top strap.
13. Rear facing amber light must be visible to rear approaching vehicles; light must be hard wired so it stays on with ignition switched on
14. Vehicles must be equipped with differential locking devices in both front and rear axles
15. It is highly recommended that vehicles be equipped with beadlock wheels
16. Vehicles must carry a small first aid kit
17. Driver and Co-pilot must wear helmets, helmets must be dot, SNELL or FIA approved. Helmets must be current in dating and in good condition.
18. High back seats or helmet pads must be used
19. Neck support devices are highly recommended
20. 1 piece fire suits and shoes are highly recommended
21. Window nets are highly recommended
22. Minimum 6000lb front mounted winch, winch must be operational






Dirt Riot UTV Class Rules
These rules are intended to promote a safe and fair racing environment, these classes are open ended in many aspects due in large part to allow as many already built trail rigs to compete with a minimum amount of changes. Changes to these rules may occur at anytime during the racing season, rules changes will be posted on the follow websites; werocklive.com, W.E.ROCK Events facebook page, pirate4x4.com, direct contact with competitors may occur but is not guaranteed. As this class grows it may be deemed necessary to add additional classes, this change may occur at any time during the season.

UTV Class Rules
1. Any and all shock combos allowed
2. Factory Cage with these additions will be allowed, 6 point attachment, mounted to frame or solid mounting surface, flat surface mounting must be sandwiched and use at least 4 - 3/8” grade 8 bolts and nuts, Gussets must be added for strength at all corners or tube intersections. Complete replacement of stock cage must be 6 point cage of acceptable design and configuration must be at least 1.5” .120 wall or greater and magnetic steel material, all corners or tube intersections must be gusseted. Solid roof required, magnetic metal of at least .060 or aluminum of 1/8” in thickness acceptable
3. Minimum of 4 point harnesses must be used for both driver and co-driver; they must be in good shape and show no signs of wear or weather damage, condition to be decided by a Dirt riot “Official”
4. Side protection, door bars or solid doors are required, if doors are hinged they must use a positive locking device to secure the doors in a closed position
5. Front mounted winch wit synthetic winch line, winch must be operational
6. Complete floorboard and firewall required, firewall must extend from inner side panel to opposite inner side panel
8. Fuel cell/gas tank must be separated from passenger compartment. Fuel cells must be strapped and not flange mounted, stock fuel tanks are allowed
9. Minimum 2 5lb fire extinguishers must be mounted within reach rescue personnel, and mounted in such a way as they are secure but easily accessed when needed
10. Seats must be mounted securely to the cage or floorboards
11. All Wiring, brake lines, fuel lines and vent lines must be in good condition and secured as needed
12. Battery must be of a dry cell or gel cell construction and securely mounted with a cage, box, or over the top strap. Standard type (wet) batteries must be boxed
13. Rear facing amber light must be visible to rear approaching vehicles; light must be hard wired so it stays on with ignition switched on
14. Vehicles must be 4 wheel drive
15. It is highly recommended that vehicles be equipped with beadlock wheels
16. Vehicles must carry a small first aid kit
17. Driver and Co-pilot must wear helmets, helmets must be dot, SNELL or FIA approved. Helmets must be in good condition
18. High back seats or helmet pads must be used
19. Neck support devices are highly recommended
20. 1 piece fire suits and shoes are highly recommended
21. Window nets are highly recommended
__________________
Thanks to our marketing partners: MAXXIS Tires, Trail Gear, NITTRO Gear and Axle, ARTEC Industries, Branik Motorsports, ASR Recovery Gear, SpiderTrax, Dirt Skins, Metal Cloak, Crown Automotive, SuperChips, PSC Steering, Fox Shocks, Axel Off Road, Currie Enterprises, PCI Race Radios

Quote:
Originally Posted by ZUKROVER
4 wheeling sure changes when there is a crowd and cones.
http://www.werocklive.com
530-417-5333

http://www.facebook.com/people/Rich-C-Klein/541920521
http://twitter.com/werocklive
http://www.myspace.com/daddyrocks

( @ Y @ ) ( * Y * ) ( . Y . )

Big Rich is offline   Reply With Quote
Old 12-16-2011, 11:51 AM   #2 (permalink)
Zeus of the Sluice
 
yield2me's Avatar
 
Join Date: Feb 2001
Member # 3196
Location: El Paso, TX
Posts: 2,565
6000lb winch on an UTV or was that a typo?? I thought my 5k winch was overkill!

Rob
__________________
Usnick Motorsports
UTV #1999

MJ Motorsports
yield2me is offline   Reply With Quote
Sponsored Links
Old 12-16-2011, 11:54 AM   #3 (permalink)
W.E.ROCK CEO
 
Big Rich's Avatar
 
Join Date: Jan 2001
Member # 3123
Location: Blackfoot, ID (almost BFE)
Posts: 8,042
Send a message via Yahoo to Big Rich
Quote:
Originally Posted by yield2me View Post
6000lb winch on an UTV or was that a typo?? I thought my 5k winch was overkill!

Rob


Typo
__________________
Thanks to our marketing partners: MAXXIS Tires, Trail Gear, NITTRO Gear and Axle, ARTEC Industries, Branik Motorsports, ASR Recovery Gear, SpiderTrax, Dirt Skins, Metal Cloak, Crown Automotive, SuperChips, PSC Steering, Fox Shocks, Axel Off Road, Currie Enterprises, PCI Race Radios

Quote:
Originally Posted by ZUKROVER
4 wheeling sure changes when there is a crowd and cones.
http://www.werocklive.com
530-417-5333

http://www.facebook.com/people/Rich-C-Klein/541920521
http://twitter.com/werocklive
http://www.myspace.com/daddyrocks

( @ Y @ ) ( * Y * ) ( . Y . )

Big Rich is offline   Reply With Quote
Old 12-16-2011, 05:43 PM   #4 (permalink)
Mall Crawler
 
REDLYNER's Avatar
 
Join Date: Mar 2006
Member # 68929
Location: Mountain Island, NC
Posts: 767
Quote:
4. Side protection/Door bars required
Would tube doors on a TJ qualify as that?

What about a soft door with an aluminum skin?

Last edited by REDLYNER; 12-16-2011 at 05:43 PM.
REDLYNER is offline   Reply With Quote
Old 12-16-2011, 05:47 PM   #5 (permalink)
W.E.ROCK CEO
 
Big Rich's Avatar
 
Join Date: Jan 2001
Member # 3123
Location: Blackfoot, ID (almost BFE)
Posts: 8,042
Send a message via Yahoo to Big Rich
Quote:
Originally Posted by REDLYNER View Post
Would tube doors on a TJ qualify as that?

What about a soft door with an aluminum skin?

Yes that would be fine.........

__________________
Thanks to our marketing partners: MAXXIS Tires, Trail Gear, NITTRO Gear and Axle, ARTEC Industries, Branik Motorsports, ASR Recovery Gear, SpiderTrax, Dirt Skins, Metal Cloak, Crown Automotive, SuperChips, PSC Steering, Fox Shocks, Axel Off Road, Currie Enterprises, PCI Race Radios

Quote:
Originally Posted by ZUKROVER
4 wheeling sure changes when there is a crowd and cones.
http://www.werocklive.com
530-417-5333

http://www.facebook.com/people/Rich-C-Klein/541920521
http://twitter.com/werocklive
http://www.myspace.com/daddyrocks

( @ Y @ ) ( * Y * ) ( . Y . )

Big Rich is offline   Reply With Quote
Old 12-16-2011, 06:22 PM   #6 (permalink)
Zeus of the Sluice
 
hurleygo3's Avatar
 
Join Date: Oct 2006
Member # 80862
Location: Orange County
Posts: 4,753
Looks like a good time. I like the entry fees for series also.
hurleygo3 is offline   Reply With Quote
Old 12-16-2011, 06:29 PM   #7 (permalink)
Rock God
 
ChestonScout's Avatar
 
Join Date: Feb 2008
Member # 109153
Location: Clinton, ut
Posts: 1,886
what type of amber light do we need? Like a sidemarker light?
__________________
TTC Competitor 08
TTC Alternate 09
TTC Recovery 10-13

I think I may be addicted

HARD GRASS HAVOCS ORIGINAL BADASS

Quote:
Originally Posted by wyldstallyn73 View Post
Dont let the haters get you down, alexray55!!! I would rather see ten homebrew rigs built with ingenuity and sweat than ten rigs built with a checkbook or credit card.
ChestonScout is offline   Reply With Quote
Old 12-16-2011, 07:20 PM   #8 (permalink)
Wheeler
 
Folsom's Avatar
 
Join Date: Nov 2011
Member # 203838
Location: zetroc
Posts: 159
in stock class can i do 60's? ( under a cherokee)

i also need some clarification on coilovers... in stock trail are they allowed?

as of now i plan on doing all stock suspension, leaf rear oem coil front, can i add traction bars or 4 link the rear while retaining the stock suspension?

im assuming all tail lights headlights, and any trim plastics / chrome should be removed.... to keep it clean out there,

obviously i will add aftermarket taillights and headlights.....

thanks- cody
Folsom is offline   Reply With Quote
Old 12-17-2011, 10:07 AM   #9 (permalink)
W.E.ROCK CEO
 
Big Rich's Avatar
 
Join Date: Jan 2001
Member # 3123
Location: Blackfoot, ID (almost BFE)
Posts: 8,042
Send a message via Yahoo to Big Rich
Quote:
Originally Posted by Folsom View Post
in stock class can i do 60's? ( under a cherokee)

i also need some clarification on coilovers... in stock trail are they allowed?

as of now i plan on doing all stock suspension, leaf rear oem coil front, can i add traction bars or 4 link the rear while retaining the stock suspension?

im assuming all tail lights headlights, and any trim plastics / chrome should be removed.... to keep it clean out there,

obviously i will add aftermarket taillights and headlights.....

thanks- cody
Coil Overs and 60's are fine, but you can not cut the body or floor for coilovers, floors must remain intact and complete

Doing so will also move you out of being able to use the same rig in the Pro Stock Class (4600), if your going to build think of that as well....
__________________
Thanks to our marketing partners: MAXXIS Tires, Trail Gear, NITTRO Gear and Axle, ARTEC Industries, Branik Motorsports, ASR Recovery Gear, SpiderTrax, Dirt Skins, Metal Cloak, Crown Automotive, SuperChips, PSC Steering, Fox Shocks, Axel Off Road, Currie Enterprises, PCI Race Radios

Quote:
Originally Posted by ZUKROVER
4 wheeling sure changes when there is a crowd and cones.
http://www.werocklive.com
530-417-5333

http://www.facebook.com/people/Rich-C-Klein/541920521
http://twitter.com/werocklive
http://www.myspace.com/daddyrocks

( @ Y @ ) ( * Y * ) ( . Y . )

Big Rich is offline   Reply With Quote
Old 12-20-2011, 11:59 PM   #10 (permalink)
AZUndertaker
 
azhayseed's Avatar
 
Join Date: Apr 2007
Member # 89449
Location: Tucson, AZ
Posts: 764
Rich,
Can you explain what the 4500 and 4600 classes are?
I'm assuming they are the Ultra4 / KOH stock classes.
__________________
John Brock
Rocking J Offroad Race Team #777 / Team Crossedup #4431
We want to thank our sponsors for their continued support:
Amanda Products USA
Rocking J Offroad, LLC.
Crossedup Customs
ADS Racing Shocks
Artec Industries
Ruffstuff Specialties
JRat Offroad/ Sixty9 Axle
Yukon Axle and Gear
Raceline Wheels

Give these business your support so they can support us!
azhayseed is offline   Reply With Quote
Old 12-21-2011, 03:43 AM   #11 (permalink)
Registered User
 
Join Date: Apr 2007
Member # 89869
Location: Germany
Posts: 300
Can i start 2,5l TJ with supercharger in Trail Class!?
__________________
First International KOH finisher!
Baja 1000 Winner !
IRON-MIKE is offline   Reply With Quote
Old 12-21-2011, 04:29 AM   #12 (permalink)
Wheeler
 
Folsom's Avatar
 
Join Date: Nov 2011
Member # 203838
Location: zetroc
Posts: 159
so, 60s are ok ..... but coil overs are not?....

links to other rule books 4400-4500-4600


http://www.werocklive.com/dirt-riot-4400-4500-4600/


http://www.werocklive.com/we/wp-cont...4_rules_V2.pdf
Folsom is offline   Reply With Quote
Old 12-21-2011, 06:31 AM   #13 (permalink)
W.E.ROCK CEO
 
Big Rich's Avatar
 
Join Date: Jan 2001
Member # 3123
Location: Blackfoot, ID (almost BFE)
Posts: 8,042
Send a message via Yahoo to Big Rich
Stock trail is not the same as the ultra 4 classes - we are offering them as well - The TRAIL classes are intended to open up an arena for rigs that have been built as stout trail rigs, no more than that

You can still run 4500 and 4600 at Dirt Riot races
__________________
Thanks to our marketing partners: MAXXIS Tires, Trail Gear, NITTRO Gear and Axle, ARTEC Industries, Branik Motorsports, ASR Recovery Gear, SpiderTrax, Dirt Skins, Metal Cloak, Crown Automotive, SuperChips, PSC Steering, Fox Shocks, Axel Off Road, Currie Enterprises, PCI Race Radios

Quote:
Originally Posted by ZUKROVER
4 wheeling sure changes when there is a crowd and cones.
http://www.werocklive.com
530-417-5333

http://www.facebook.com/people/Rich-C-Klein/541920521
http://twitter.com/werocklive
http://www.myspace.com/daddyrocks

( @ Y @ ) ( * Y * ) ( . Y . )

Big Rich is offline   Reply With Quote
Old 12-21-2011, 03:31 PM   #14 (permalink)
Granite Guru
 
Master-Pull's Avatar
 
Join Date: Nov 2009
Member # 146603
Location: Bellingham, WA
Posts: 889
I am confused about the ex-acceptable part of the rules for axle swaps in the stock class. Does that mean we are not allowed to swap axles in the stock class?

-Alex
__________________
Master Pull Recovery Gear - The World Leader In Synthetic Rope
10% PBB discount

http://www.MasterPull.com
-- Recovery Gear of the ‘10 and ‘11 Griffin KOH -- Official Recovery Gear of Cal-Neva Extreme and Area BFE in Moab
Master-Pull is offline   Reply With Quote
Old 12-21-2011, 03:53 PM   #15 (permalink)
W.E.ROCK CEO
 
Big Rich's Avatar
 
Join Date: Jan 2001
Member # 3123
Location: Blackfoot, ID (almost BFE)
Posts: 8,042
Send a message via Yahoo to Big Rich
Quote:
Originally Posted by Master-Pull View Post
I am confused about the ex-acceptable part of the rules for axle swaps in the stock class. Does that mean we are not allowed to swap axles in the stock class?

-Alex

FIXED

__________________
Thanks to our marketing partners: MAXXIS Tires, Trail Gear, NITTRO Gear and Axle, ARTEC Industries, Branik Motorsports, ASR Recovery Gear, SpiderTrax, Dirt Skins, Metal Cloak, Crown Automotive, SuperChips, PSC Steering, Fox Shocks, Axel Off Road, Currie Enterprises, PCI Race Radios

Quote:
Originally Posted by ZUKROVER
4 wheeling sure changes when there is a crowd and cones.
http://www.werocklive.com
530-417-5333

http://www.facebook.com/people/Rich-C-Klein/541920521
http://twitter.com/werocklive
http://www.myspace.com/daddyrocks

( @ Y @ ) ( * Y * ) ( . Y . )

Big Rich is offline   Reply With Quote
Old 12-21-2011, 04:08 PM   #16 (permalink)
Granite Guru
 
Master-Pull's Avatar
 
Join Date: Nov 2009
Member # 146603
Location: Bellingham, WA
Posts: 889


Thanks, that helps!

-Alex
__________________
Master Pull Recovery Gear - The World Leader In Synthetic Rope
10% PBB discount

http://www.MasterPull.com
-- Recovery Gear of the ‘10 and ‘11 Griffin KOH -- Official Recovery Gear of Cal-Neva Extreme and Area BFE in Moab
Master-Pull is offline   Reply With Quote
Old 01-11-2012, 05:33 PM   #17 (permalink)
Registered User
 
Join Date: Apr 2009
Member # 134769
Posts: 18
Quote:
modified trail 2. Any suspension mod’s allowed
Does this include ORI STRUTS by Ultra4 mod stock rules the diameter is too thick. Are they ok for Mod trail?

Thanks!
silverjeep is offline   Reply With Quote
Old 01-11-2012, 08:08 PM   #18 (permalink)
W.E.ROCK CEO
 
Big Rich's Avatar
 
Join Date: Jan 2001
Member # 3123
Location: Blackfoot, ID (almost BFE)
Posts: 8,042
Send a message via Yahoo to Big Rich
Quote:
Originally Posted by silverjeep View Post
Does this include ORI STRUTS by Ultra4 mod stock rules the diameter is too thick. Are they ok for Mod trail?

Thanks!

ORI's are a by-pass, so no go in stock

Sorry....
__________________
Thanks to our marketing partners: MAXXIS Tires, Trail Gear, NITTRO Gear and Axle, ARTEC Industries, Branik Motorsports, ASR Recovery Gear, SpiderTrax, Dirt Skins, Metal Cloak, Crown Automotive, SuperChips, PSC Steering, Fox Shocks, Axel Off Road, Currie Enterprises, PCI Race Radios

Quote:
Originally Posted by ZUKROVER
4 wheeling sure changes when there is a crowd and cones.
http://www.werocklive.com
530-417-5333

http://www.facebook.com/people/Rich-C-Klein/541920521
http://twitter.com/werocklive
http://www.myspace.com/daddyrocks

( @ Y @ ) ( * Y * ) ( . Y . )

Big Rich is offline   Reply With Quote
Old 01-12-2012, 11:46 AM   #19 (permalink)
Registered User
 
greenjeep's Avatar
 
Join Date: Jun 2003
Member # 20548
Location: MOAB LOCAL!!
Posts: 139
Can you explain exactly what's needed for:

4. Side protection/Door bars required
__________________
Red Rock 4-Wheelers Land Use Officer
greenjeep is offline   Reply With Quote
Old 01-12-2012, 05:49 PM   #20 (permalink)
Registered User
 
Join Date: Nov 2006
Member # 82306
Location: Little Elm, TX
Posts: 192
Quote:
Originally Posted by Big Rich View Post
UTV Class Rules
9. Minimum 2 5lb fire extinguishers must be mounted within reach rescue personnel, and mounted in such a way as they are secure but easily accessed when needed
(2) 5# extinguishers? or (2) 2.5#? From what I have read, BITD, ISXSA, Ultra 4 only need (2) 2.5#.
__________________
Cutters Racing #987 UTV
jak4x4.com
LockedLJ is offline   Reply With Quote
Old 02-16-2012, 05:33 PM   #21 (permalink)
Rope Dude
 
Custom Splice's Avatar
 
Join Date: Oct 2008
Member # 122622
Location: Lawrence, Kansas
Posts: 1,977
Quote:
Originally Posted by Big Rich View Post
8. Fuel cell/gas tank must be separated from passenger compartment. Fuel cells must be strapped and not flange mounted
So stock location is okay for KOH but not Dirt Riot?

Nevermind figured it out
__________________
Todd
Custom Splice- AmSteel Blue Winch Ropes
We Stock - Safety Thimbles, Tube Thimbles and Excel Hooks
Office- 785 856 1844 Cell-580 504 1405

Need WINCH Rope? pirate4x4 is the secret code in the store for free shipping.

Have you seen APE EATER RACING's site
Custom Splice is offline   Reply With Quote
Old 02-16-2012, 06:15 PM   #22 (permalink)
Registered User
 
Join Date: Oct 2009
Member # 143821
Posts: 224
Hey Big, on the UTV rules, stock cage is okay but if it's replaced we have to go to 1.5X.120 wall. Isn't that a bit excessive, BITD, SCORE and ISA all require .090 wall minimum. DOM 1013-1020 is accepted, 4130 CM recommended.
.120 wall is great for bigger machines, but most UTV's are half the weight of an Ultra 4/4400 car.

If .090 is okay, I'll see you at the Mountain Series Dirt Riots...

For UTVs, check out the ISA Rules, they would be a great point to start, KOH used them...
http://www.isxsa.com/Rules
__________________
Arctic Cat Wildcat X: ITP, Muzzys Performance, King Shocks, chassis built by Dunlap Racing.
Darryl89 is offline   Reply With Quote
Old 02-16-2012, 06:28 PM   #23 (permalink)
Registered User
 
Join Date: Oct 2009
Member # 143821
Posts: 224
Quote:
Originally Posted by LockedLJ View Post
(2) 5# extinguishers? or (2) 2.5#? From what I have read, BITD, ISXSA, Ultra 4 only need (2) 2.5#.
Agreed, ISA and BITD require extinguishers accessible from both inside the cab and outside, which often means 2 extinguishers.
2 2.5lb is typically the rule...I carry a 2.5lb inside the cab and have a 5lb mounted outside on the rear deck..
__________________
Arctic Cat Wildcat X: ITP, Muzzys Performance, King Shocks, chassis built by Dunlap Racing.
Darryl89 is offline   Reply With Quote
Old 02-16-2012, 08:15 PM   #24 (permalink)
Rope Dude
 
Custom Splice's Avatar
 
Join Date: Oct 2008
Member # 122622
Location: Lawrence, Kansas
Posts: 1,977
Quote:
Originally Posted by Darryl89 View Post
Hey Big, on the UTV rules, stock cage is okay but if it's replaced we have to go to 1.5X.120 wall. Isn't that a bit excessive, BITD, SCORE and ISA all require .090 wall minimum. DOM 1013-1020 is accepted, 4130 CM recommended.
.120 wall is great for bigger machines, but most UTV's are half the weight of an Ultra 4/4400 car.

If .090 is okay, I'll see you at the Mountain Series Dirt Riots...

For UTVs, check out the ISA Rules, they would be a great point to start, KOH used them...
http://www.isxsa.com/Rules
I feel their rules were good. A few changes I would make.
__________________
Todd
Custom Splice- AmSteel Blue Winch Ropes
We Stock - Safety Thimbles, Tube Thimbles and Excel Hooks
Office- 785 856 1844 Cell-580 504 1405

Need WINCH Rope? pirate4x4 is the secret code in the store for free shipping.

Have you seen APE EATER RACING's site
Custom Splice is offline   Reply With Quote
Old 02-16-2012, 08:48 PM   #25 (permalink)
UTVGuide.net
 
Crowdog's Avatar
 
Join Date: Jan 2001
Member # 2787
Location: Shingle Springs, CA
Posts: 2,159
I still don't quite understand what your UTV races will look like. Can you enlighten me Rich?
__________________
UTVGuide.net | Facebook | UTV Blog | UTV Industry News
Crowdog is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 04:54 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 ©2011, Crawlability, Inc.