M35a2 'Deuce' with PTO Winch! FOR SALE - Pirate4x4.Com : 4x4 and Off-Road Forum

100dollarman · 02-22-2010, 07:03 PM

6x6
air shift front axle
cab Heater
PTO winch
23K miles
Runs good!

Comes with SF97 Gov form, and bill of sale only.

$5500

Call 760 248 6214 or my cell 760 964 5123

Delivery available for $2 per loaded mile

Thanks for looking!

Darman · 02-24-2010, 10:16 PM

what is your policy on payment? if I were to buy this truck and have you bob it how much up front money would it take to get you started? the whole $7500.00 ? and would that include the 49inch tires? or would that be another grand?

100dollarman · 02-24-2010, 10:31 PM

Quote:

Originally Posted by Darman

what is your policy on payment? if I were to buy this truck and have you bob it how much up front money would it take to get you started? the whole $7500.00 ? and would that include the 49inch tires? or would that be another grand?

To make a truck yours, and to start the Bob, we usually get 1/2 down and balance when done. I am flexible though, if that doesnt work for you.

The 49" tires are $1000 extra. I have some really nice 49" tires in stock right now, too!

The winch Deuces are becoming more rare right now...

Let me know if you are ready--- we are doing one now that should be done in about a week, then I will be on to the next one!!!

Hawkz · 03-01-2010, 08:17 AM

Is it possible to put some kind of flatbed on these? I think it would make an awesome hauler to get my Jeep back and forth to the local parks...

100dollarman · 03-01-2010, 08:53 AM

Quote:

Originally Posted by Hawkz

Is it possible to put some kind of flatbed on these? I think it would make an awesome hauler to get my Jeep back and forth to the local parks...

Absolutely IMPOSSIBLE!

Hawkz · 03-01-2010, 09:26 AM

Is the inside of the stock bed on these flat? If it is, my Jeep may fit in there. I would just need to figure out ramps...

100dollarman · 03-01-2010, 11:28 AM

Quote:

Originally Posted by Hawkz

Is the inside of the stock bed on these flat? If it is, my Jeep may fit in there. I would just need to figure out ramps...

I will post a pic of the bed, and a measurement...

G_Man · 03-02-2010, 10:18 AM

this was posted down in the south central board

Quote:

Originally Posted by jackson76550

got a new rig on rockwells

100dollarman · 03-02-2010, 10:30 AM

12' x 8'

CjAl · 03-03-2010, 07:24 AM

I've got to stop reading your threads. You are going to get me in SO much trouble

100dollarman · 03-11-2010, 04:53 PM

Someone should snag this one up!

Comes with soft top!

Darman · 03-12-2010, 10:31 AM

July is getting closer.......

MedicMog · 03-13-2010, 12:38 PM

Hundy, any chance you have or know of a M123 10 ton for sale?

100dollarman · 03-13-2010, 06:50 PM

Quote:

Originally Posted by MedicMog

Hundy, any chance you have or know of a M123 10 ton for sale?

No- sorry-

The m123s were built in the 1950s and then some M123a1c were from the late 60s. Kinda rare. Used for hauling Tanks and heavy equip back in the day.

Fortunate sun · 03-14-2010, 07:53 AM

Bro you're starting to get on my wifes nerves. I've been talking about a duece for a while and I mentioned you made them to her and talked about them all through dinner one night.

Then yesterday we were watching PowerBlock TV on Spike and he dropped your name and did a project on a duece. lol. She officially hates you!

100dollarman · 03-14-2010, 08:54 AM

Quote:

Originally Posted by Fortunate sun

Bro you're starting to get on my wifes nerves. I've been talking about a duece for a while and I mentioned you made them to her and talked about them all through dinner one night.

Then yesterday we were watching PowerBlock TV on Spike and he dropped your name and did a project on a duece. lol. She officially hates you!

Thanks to Ian at Xtreme 4X4 for the www.100dollarman.com plug!!!

You should get your wife one!

Fortunate sun · 03-14-2010, 09:20 AM

A woman thats Beautiful AND willing to drive on of these is a myth. lol Those must be models lol

Hawkz · 03-16-2010, 11:35 AM

Thanks for the good info. One more dumb question.

What is the GVWR on these? If it's less than 16,000 lbs then I can drive it in Illinois without a CDL...

Just covering all my bases before I buy one.

100dollarman · 03-16-2010, 04:26 PM

Quote:

Originally Posted by Hawkz

Thanks for the good info. One more dumb question.

What is the GVWR on these? If it's less than 16,000 lbs then I can drive it in Illinois without a CDL...

Just covering all my bases before I buy one.

18,500lbs

100dollarman · 03-16-2010, 04:26 PM

SOLD!!!

thanks BOB!

Hawkz · 03-17-2010, 06:30 AM

Quote:

Originally Posted by 100dollarman

18,500lbs

Damn. Guess I will have to get a bobbed one...

BuckFever · 03-22-2010, 03:19 AM

Yep, caught that plug on XTreme....that is a show I'm looking forward to

Now as for that deuce, which is already sold of course. Does that beautiful ornament come free with purchase? Interesting that they're bobbed because that girl is also BOBBED....BIG OL (fill in the blank)

herbyjr · 07-03-2012, 08:51 PM

So I did a Google Image search for "m35a2 winch".

This was the first image to come up:

My first thought was, "That's not the kind of winch I was looking for", but I gotta admit, that's a great picture!

H.

02-22-2010, 07:03 PM	#1 (permalink)
100dollarman Rock God Join Date: Jul 2008 Member # 116963 Location: Lucerne Valley, Ca. 92356 Posts: 2,058	M35a2 'Deuce' with PTO Winch! FOR SALE 6x6 air shift front axle cab Heater PTO winch 23K miles Runs good! Comes with SF97 Gov form, and bill of sale only. $5500 Call 760 248 6214 or my cell 760 964 5123 Delivery available for $2 per loaded mile Thanks for looking! Attached Images __________________ HUNDY '11 2 dr JK the "VIRGIN" The "BULLDOG" rock buggy Mil Surplus Trucks, Trailers, Tires, Rockwells, and more! www.100dollarman.com www.lowballer.net www.TRAILBOXtrailers.com OFFROAD trailers!!! 37"x12.50x16.5" Hummer tires GOODYEAR MT $100 Each!

03-02-2010, 10:30 AM	#9 (permalink)
100dollarman Rock God Join Date: Jul 2008 Member # 116963 Location: Lucerne Valley, Ca. 92356 Posts: 2,058	12' x 8' Attached Images __________________ HUNDY '11 2 dr JK the "VIRGIN" The "BULLDOG" rock buggy Mil Surplus Trucks, Trailers, Tires, Rockwells, and more! www.100dollarman.com www.lowballer.net www.TRAILBOXtrailers.com OFFROAD trailers!!! 37"x12.50x16.5" Hummer tires GOODYEAR MT $100 Each!

03-11-2010, 04:53 PM	#11 (permalink)
100dollarman Rock God Join Date: Jul 2008 Member # 116963 Location: Lucerne Valley, Ca. 92356 Posts: 2,058	Someone should snag this one up! Comes with soft top! __________________ HUNDY '11 2 dr JK the "VIRGIN" The "BULLDOG" rock buggy Mil Surplus Trucks, Trailers, Tires, Rockwells, and more! www.100dollarman.com www.lowballer.net www.TRAILBOXtrailers.com OFFROAD trailers!!! 37"x12.50x16.5" Hummer tires GOODYEAR MT $100 Each!

03-16-2010, 04:26 PM	#20 (permalink)
100dollarman Rock God Join Date: Jul 2008 Member # 116963 Location: Lucerne Valley, Ca. 92356 Posts: 2,058	SOLD!!! thanks BOB! __________________ HUNDY '11 2 dr JK the "VIRGIN" The "BULLDOG" rock buggy Mil Surplus Trucks, Trailers, Tires, Rockwells, and more! www.100dollarman.com www.lowballer.net www.TRAILBOXtrailers.com OFFROAD trailers!!! 37"x12.50x16.5" Hummer tires GOODYEAR MT $100 Each!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-24-2010, 10:16 PM	#2 (permalink)
Darman Registered User Join Date: Feb 2010 Member # 154211 Posts: 4	what is your policy on payment? if I were to buy this truck and have you bob it how much up front money would it take to get you started? the whole $7500.00 ? and would that include the 49inch tires? or would that be another grand?

03-01-2010, 08:17 AM	#4 (permalink)
Hawkz Registered User Join Date: Nov 2009 Member # 146238 Location: Northern Illinois Posts: 33	Is it possible to put some kind of flatbed on these? I think it would make an awesome hauler to get my Jeep back and forth to the local parks...

03-01-2010, 09:26 AM	#6 (permalink)
Hawkz Registered User Join Date: Nov 2009 Member # 146238 Location: Northern Illinois Posts: 33	Is the inside of the stock bed on these flat? If it is, my Jeep may fit in there. I would just need to figure out ramps...

03-03-2010, 07:24 AM	#10 (permalink)
CjAl Registered User Join Date: Jan 2010 Member # 152079 Posts: 77	I've got to stop reading your threads. You are going to get me in SO much trouble

03-12-2010, 10:31 AM	#12 (permalink)
Darman Registered User Join Date: Feb 2010 Member # 154211 Posts: 4	July is getting closer.......

03-13-2010, 12:38 PM	#13 (permalink)
MedicMog Registered User Join Date: Feb 2010 Member # 153328 Location: Southern Indiana Posts: 27	Hundy, any chance you have or know of a M123 10 ton for sale?

03-14-2010, 07:53 AM	#15 (permalink)
Fortunate sun Registered User Join Date: Feb 2010 Member # 155092 Location: Ottawa Canada Posts: 15	Bro you're starting to get on my wifes nerves. I've been talking about a duece for a while and I mentioned you made them to her and talked about them all through dinner one night. Then yesterday we were watching PowerBlock TV on Spike and he dropped your name and did a project on a duece. lol. She officially hates you!

03-14-2010, 09:20 AM	#17 (permalink)
Fortunate sun Registered User Join Date: Feb 2010 Member # 155092 Location: Ottawa Canada Posts: 15	A woman thats Beautiful AND willing to drive on of these is a myth. lol Those must be models lol

03-16-2010, 11:35 AM	#18 (permalink)
Hawkz Registered User Join Date: Nov 2009 Member # 146238 Location: Northern Illinois Posts: 33	Thanks for the good info. One more dumb question. What is the GVWR on these? If it's less than 16,000 lbs then I can drive it in Illinois without a CDL... Just covering all my bases before I buy one.

03-22-2010, 03:19 AM	#22 (permalink)
BuckFever Registered User Join Date: Jan 2008 Member # 107239 Posts: 14	Yep, caught that plug on XTreme....that is a show I'm looking forward to Now as for that deuce, which is already sold of course. Does that beautiful ornament come free with purchase? Interesting that they're bobbed because that girl is also BOBBED....BIG OL (fill in the blank)

07-03-2012, 08:51 PM	#23 (permalink)
herbyjr Registered User Join Date: Mar 2012 Member # 213972 Location: BA, OK Posts: 5	So I did a Google Image search for "m35a2 winch". This was the first image to come up: My first thought was, "That's not the kind of winch I was looking for", but I gotta admit, that's a great picture! H.