 |
|
|
 |
12-18-2004, 10:34 PM
|
#1 (permalink) |
|
Registered User
Join Date: Jan 2002
Member # 9293
Location: Las Vegas
Posts: 79
|
Steering Stops
I just installed 35's on my d60 - 98' 2500 quad cab using 05' 17" factory alloy wheels. I have 2" spacers up front so clearence is fine, but am rubbing the control arms on tight turns. My thought after looking at the outer knunckles is to drill out the center of the steering stop pad, and tap it for a bolt to adjust the stops distance, just to keep the tires off the arms. I hate the tires sticking out look, this also saves some stress on the wheel bearings. Has anybody done this, any other ideas at a cheap fix, before i design custom control arms.
T.
__________________
2007 Duramax 2500HD Crew Looking for Built Crawler to Flat Tow |
|
|
|
12-19-2004, 05:32 AM
|
#2 (permalink) |
|
Granite Guru
Join Date: Sep 2003
Member # 23066
Posts: 563
|
Adding steering stops will be the cheapest solution. How wide are the 35's? 12.5"?
__________________
09 JK unlimited Rubicon 07 2500 CTD Ram 02 Grand Cherokee 79 Cherokee WT 360/T18/Dana 20 ] |
|
|
|
| Sponsored Links |
|
12-19-2004, 06:21 PM
|
#3 (permalink) |
|
Registered User
Join Date: Jan 2002
Member # 9293
Location: Las Vegas
Posts: 79
|
12.50 on 17x8's. I had a feeling on this, just wondering if it had been done before. i'll drop some pics when completed. Thanks...
T.
__________________
2007 Duramax 2500HD Crew Looking for Built Crawler to Flat Tow |
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT -7. The time now is 10:46 AM.