NV4500 from Chevy 4x4 - Pirate4x4.Com : 4x4 and Off-Road Forum

chevboy171 · 10-06-2011, 02:27 PM

This is out of a '92 Chevy so it has the 6.34 low granny gear. It was left on the shelf at one of the Arizona Chevrolet dealers that got closed down a couple years ago and hasn't been used since. I've looked it over inside and out and can't find anything wrong with it. It shifts through all 6 gears (5 forward + reverse) without any problems and feels tight in all of them. I've taken a ton of pics of all the gears with the top plate and side plates off and I can send you specific shots if you are seriously interested. I believe this transmission is ready to go directly into your rig but since I obviously can't guarantee anything, I'm pricing it at $400. Local pickup and cash is best but I may be able to deliver myself within the southwest if you're patient or via freight if you make all the arrangements. I'm located in Phoenix, AZ. I don't really need anything for trade but let me know what you got if you don't have cash, I'm always looking for cool stuff for my '82 chevy 1 ton...a dana 60 locker for 3.73 gears being the primary item I'm after.

Let me know if you have any questions. Thanks -Jon

ddestruel · 10-06-2011, 03:56 PM

pm sent

chevboy171 · 10-07-2011, 11:03 AM

PM's responded to

chevboy171 · 10-07-2011, 03:04 PM

Sale Pending

OnAllFour · 10-08-2011, 01:48 PM

If sale falls through let me know I am interested.

chevboy171 · 10-11-2011, 12:22 PM

SOLD...Thanks ddestruel!

ddestruel · 10-11-2011, 09:47 PM

thank you also for working with my schedule.

10-06-2011, 02:27 PM	#1 (permalink)
chevboy171 Newbie Join Date: May 2005 Member # 47359 Location: Medford, OR Posts: 94	NV4500 from Chevy 4x4 This is out of a '92 Chevy so it has the 6.34 low granny gear. It was left on the shelf at one of the Arizona Chevrolet dealers that got closed down a couple years ago and hasn't been used since. I've looked it over inside and out and can't find anything wrong with it. It shifts through all 6 gears (5 forward + reverse) without any problems and feels tight in all of them. I've taken a ton of pics of all the gears with the top plate and side plates off and I can send you specific shots if you are seriously interested. I believe this transmission is ready to go directly into your rig but since I obviously can't guarantee anything, I'm pricing it at $400. Local pickup and cash is best but I may be able to deliver myself within the southwest if you're patient or via freight if you make all the arrangements. I'm located in Phoenix, AZ. I don't really need anything for trade but let me know what you got if you don't have cash, I'm always looking for cool stuff for my '82 chevy 1 ton...a dana 60 locker for 3.73 gears being the primary item I'm after. Let me know if you have any questions. Thanks -Jon

10-06-2011, 03:56 PM	#2 (permalink)
ddestruel Zeus of the Sluice Join Date: Jul 2003 Member # 20999 Location: Lost in Nor Cal Posts: 2,812	pm sent __________________ I AM ONE OF MANY WHOM WASHINGTON HAS CHOSEN TO IGNORE OR FORGET But i Vote GO UM Montana Griz "Jeep Lurker" KEEP REMEMBERING 9/11 Jeep with Rambler motor, SUA, front 608.9 and some bolt on stuff. I miss my old 4bt powered chief Support Frank the Tank

10-11-2011, 09:47 PM	#7 (permalink)
ddestruel Zeus of the Sluice Join Date: Jul 2003 Member # 20999 Location: Lost in Nor Cal Posts: 2,812	thank you also for working with my schedule. __________________ I AM ONE OF MANY WHOM WASHINGTON HAS CHOSEN TO IGNORE OR FORGET But i Vote GO UM Montana Griz "Jeep Lurker" KEEP REMEMBERING 9/11 Jeep with Rambler motor, SUA, front 608.9 and some bolt on stuff. I miss my old 4bt powered chief Support Frank the Tank

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-07-2011, 11:03 AM	#3 (permalink)
chevboy171 Newbie Join Date: May 2005 Member # 47359 Location: Medford, OR Posts: 94	PM's responded to

10-07-2011, 03:04 PM	#4 (permalink)
chevboy171 Newbie Join Date: May 2005 Member # 47359 Location: Medford, OR Posts: 94	Sale Pending

10-08-2011, 01:48 PM	#5 (permalink)
OnAllFour Registered User Join Date: Dec 2010 Member # 175786 Location: WILDOMAR, CA Posts: 5	If sale falls through let me know I am interested.

10-11-2011, 12:22 PM	#6 (permalink)
chevboy171 Newbie Join Date: May 2005 Member # 47359 Location: Medford, OR Posts: 94	SOLD...Thanks ddestruel!