Blown 3VZE - Pirate4x4.Com : 4x4 and Off-Road Forum

kwon-offroad · 04-16-2003, 01:55 PM

3VZE from a 93 4runner, 5 spd.

Burned exhaust valve on 6 and blown headgasket (somewhere). I pulled it, installed a used one and it's been sitting in my garage this whole time. All accessories are still on it except the a/c compressor. Will part for parts but would rather sell as whole. $100 + shipping from 30092.

justinh · 04-16-2003, 02:37 PM

i know the head gasket was blown but did the bottom end of the motor hold together? i got a 1995 sitting in my driveway with 0 compression in the #2 cylinder on the left bank

kwon-offroad · 04-16-2003, 08:30 PM

The block is fine. I knew about the burnt valve and kept driving it until it went, so if there's any damage in the bore it'll be #6. Otherwise, the crank and everything in the pit is fine. It's mounted on a stand sitting up in L'ville.

justinh · 04-16-2003, 09:01 PM

you live in atlanta right? are the heads off the motor where one might be able to see if there were any damage in the #6 cylinder, and how many miles were on it when it went?

kwon-offroad · 04-18-2003, 06:15 AM

Heads are still on the motor.
120K when pulled.

justinh · 04-18-2003, 12:27 PM

hmm, i wish that i could know whether or not there was any damage in that #6 cylinder, i will think about it and let you know something soon

DMG · 04-18-2003, 06:58 PM

How much to ship to 15017? I have some nice heads but a cracked block. DMG

brian547 · 11-15-2005, 03:01 PM

whats up, how much for shipping? pitts pa 15025. looking to buy a motor this week. very interested. email me at brian547@gmail.com, i check that more often.

04-16-2003, 01:55 PM	#1 (permalink)
kwon-offroad Registered User Join Date: Feb 2001 Member # 3189 Location: Atlanta, GA, USA Posts: 201	Blown 3VZE 3VZE from a 93 4runner, 5 spd. Burned exhaust valve on 6 and blown headgasket (somewhere). I pulled it, installed a used one and it's been sitting in my garage this whole time. All accessories are still on it except the a/c compressor. Will part for parts but would rather sell as whole. $100 + shipping from 30092. __________________ ~~~~~~~~~~~~~~~~~~ 1990 FJ62 - Bone Stock

04-16-2003, 08:30 PM	#3 (permalink)
kwon-offroad Registered User Join Date: Feb 2001 Member # 3189 Location: Atlanta, GA, USA Posts: 201	The block is fine. I knew about the burnt valve and kept driving it until it went, so if there's any damage in the bore it'll be #6. Otherwise, the crank and everything in the pit is fine. It's mounted on a stand sitting up in L'ville. __________________ ~~~~~~~~~~~~~~~~~~ 1990 FJ62 - Bone Stock

04-18-2003, 06:15 AM	#5 (permalink)
kwon-offroad Registered User Join Date: Feb 2001 Member # 3189 Location: Atlanta, GA, USA Posts: 201	Heads are still on the motor. 120K when pulled. __________________ ~~~~~~~~~~~~~~~~~~ 1990 FJ62 - Bone Stock Last edited by kwon-offroad; 04-18-2003 at 06:35 AM.

04-18-2003, 06:58 PM	#7 (permalink)
DMG Registered User Join Date: Nov 2001 Member # 8145 Location: the Iron City Posts: 2,218	How much to ship to 15017? I have some nice heads but a cracked block. DMG __________________ [QUOTE=jpfaris;15124149]Never knew DMG was so cunty.[/QUOTE]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-16-2003, 02:37 PM	#2 (permalink)
justinh Registered User Join Date: Mar 2002 Member # 10602 Location: atlanta/chino hills Posts: 255	i know the head gasket was blown but did the bottom end of the motor hold together? i got a 1995 sitting in my driveway with 0 compression in the #2 cylinder on the left bank

04-16-2003, 09:01 PM	#4 (permalink)
justinh Registered User Join Date: Mar 2002 Member # 10602 Location: atlanta/chino hills Posts: 255	you live in atlanta right? are the heads off the motor where one might be able to see if there were any damage in the #6 cylinder, and how many miles were on it when it went?

04-18-2003, 12:27 PM	#6 (permalink)
justinh Registered User Join Date: Mar 2002 Member # 10602 Location: atlanta/chino hills Posts: 255	hmm, i wish that i could know whether or not there was any damage in that #6 cylinder, i will think about it and let you know something soon

11-15-2005, 03:01 PM	#8 (permalink)
brian547 Registered User Join Date: Nov 2005 Member # 60125 Posts: 4	whats up, how much for shipping? pitts pa 15025. looking to buy a motor this week. very interested. email me at brian547@gmail.com, i check that more often.