NV 3550 - Low Miles in NC - Pirate4x4.Com : 4x4 and Off-Road Forum

rgivenspi · 02-05-2006, 04:16 PM

NV3550 5spd Transmission from a Jeep Rubicon 2004. Comes with clutch, pressure plate, flywheel, shift tower and knob. This transmission has only 8,079 miles on it and is in excellent condition. I swapped an automatic into my Rubicon and took the manual out. $850.

Stewart
rsgextra@givenshome.com

TatonkaII · 02-05-2006, 06:02 PM

I can help deliver this too VA-will be going through charlotte within a week or two

Richard w · 02-06-2006, 04:13 AM

Sent Email

jesster · 02-24-2006, 06:38 AM

Do you still have this tranny? I have a friend that needs a NV3550 and can come and pick it up. Let me know.

Thanks,
Jesse

offroadmission · 02-24-2006, 05:36 PM

will this thing bolt up to a 4.2?
will my yj 231 bolt up to it?

rgivenspi · 02-25-2006, 08:29 AM

Sorry man, I'm not a familiar with anything but TJs. You might give one of your local 4x4 shops a call - most of them are pretty helpful.

Stewart

offroadmission · 02-25-2006, 12:22 PM

does it come with the lave cylinder?

rgivenspi · 02-25-2006, 01:53 PM

Yep - slave cylinder included.

Stewart

guffey24 · 02-26-2006, 06:48 AM

That is a hell of a deal for all the stuff that goes with the tranny, you are looking at about $1700.00 worth. I am in the process of putting one in a CJ-7, It will bolt up to any AMC block no problem, the only thing will be a pilot bushing change

They made 2 different sized output shafts for the nv3550

.670
.750

you need to know which one you have to get the correct pilot bushing

offroadmission · 02-26-2006, 12:30 PM

3/4"=.750, anything less than that is a .670 right?

rnlankford21 · 02-26-2006, 01:22 PM

I am very interested...! Come to Tennessee any?

rnlankford21 · 02-27-2006, 01:18 PM

sent PM...

rgivenspi · 03-01-2006, 08:27 AM

SOLD. Thanks.

02-05-2006, 04:16 PM	#1 (permalink)
rgivenspi Wheeler Join Date: Dec 2004 Member # 40787 Location: charlotte, NC Posts: 224	SOLD -- NV 3550 - Low Miles in NC NV3550 5spd Transmission from a Jeep Rubicon 2004. Comes with clutch, pressure plate, flywheel, shift tower and knob. This transmission has only 8,079 miles on it and is in excellent condition. I swapped an automatic into my Rubicon and took the manual out. $850. Stewart rsgextra@givenshome.com __________________ Stewart Compensator Build Thread: http://www.pirate4x4.com/forum/showt...ferrerid=40787 Last edited by rgivenspi; 03-01-2006 at 08:27 AM.

02-05-2006, 06:02 PM	#2 (permalink)
TatonkaII Rock God Join Date: Jun 2002 Member # 12454 Location: South Carolina Posts: 1,753	I can help deliver this too VA-will be going through charlotte within a week or two __________________ 85 3.4 V6, 38s, Longs, 4.7 Marlins, 5" AP springs.. almost done..www.chucktownlowdown.com

02-06-2006, 04:13 AM	#3 (permalink)
Richard w Rock God Join Date: May 2003 Member # 19795 Location: Bandon Oregon Posts: 1,960	Mv3550 Sent Email

02-24-2006, 06:38 AM	#4 (permalink)
jesster Registered User Join Date: Jun 2005 Member # 49468 Location: Rogersville, TN Posts: 1,404	Do you still have this tranny? I have a friend that needs a NV3550 and can come and pick it up. Let me know. Thanks, Jesse Last edited by jesster; 02-24-2006 at 06:38 AM.

02-24-2006, 05:36 PM	#5 (permalink)
offroadmission Registered User Join Date: Apr 2004 Member # 29415 Location: north carolina Posts: 190	will this thing bolt up to a 4.2? will my yj 231 bolt up to it? __________________ For whosoever shall call upon the name of the Lord shall be saved. ROMANS 10:13 For God so loved the world that He gave His only begotten Son, that whosoever believeth in Him should not perish, but have everlasting life. JOHN 3:16

02-25-2006, 08:29 AM	#6 (permalink)
rgivenspi Wheeler Join Date: Dec 2004 Member # 40787 Location: charlotte, NC Posts: 224	Sorry man, I'm not a familiar with anything but TJs. You might give one of your local 4x4 shops a call - most of them are pretty helpful. Stewart __________________ Stewart Compensator Build Thread: http://www.pirate4x4.com/forum/showt...ferrerid=40787

02-25-2006, 12:22 PM	#7 (permalink)
offroadmission Registered User Join Date: Apr 2004 Member # 29415 Location: north carolina Posts: 190	does it come with the lave cylinder? __________________ For whosoever shall call upon the name of the Lord shall be saved. ROMANS 10:13 For God so loved the world that He gave His only begotten Son, that whosoever believeth in Him should not perish, but have everlasting life. JOHN 3:16

02-25-2006, 01:53 PM	#8 (permalink)
rgivenspi Wheeler Join Date: Dec 2004 Member # 40787 Location: charlotte, NC Posts: 224	Yep - slave cylinder included. Stewart __________________ Stewart Compensator Build Thread: http://www.pirate4x4.com/forum/showt...ferrerid=40787

02-26-2006, 06:48 AM	#9 (permalink)
guffey24 Registered User Join Date: Jan 2006 Member # 66280 Location: Hendersonville NC Posts: 358	That is a hell of a deal for all the stuff that goes with the tranny, you are looking at about $1700.00 worth. I am in the process of putting one in a CJ-7, It will bolt up to any AMC block no problem, the only thing will be a pilot bushing change They made 2 different sized output shafts for the nv3550 .670 .750 you need to know which one you have to get the correct pilot bushing

02-26-2006, 12:30 PM	#10 (permalink)
offroadmission Registered User Join Date: Apr 2004 Member # 29415 Location: north carolina Posts: 190	3/4"=.750, anything less than that is a .670 right? __________________ For whosoever shall call upon the name of the Lord shall be saved. ROMANS 10:13 For God so loved the world that He gave His only begotten Son, that whosoever believeth in Him should not perish, but have everlasting life. JOHN 3:16

02-26-2006, 01:22 PM	#11 (permalink)
rnlankford21 Registered User Join Date: Jan 2006 Member # 66317 Location: Soddy-Daisy / Dunlap, TN Posts: 134	I am very interested...! Come to Tennessee any? Last edited by rnlankford21; 02-26-2006 at 01:23 PM.

02-27-2006, 01:18 PM	#12 (permalink)
rnlankford21 Registered User Join Date: Jan 2006 Member # 66317 Location: Soddy-Daisy / Dunlap, TN Posts: 134	sent PM...

03-01-2006, 08:27 AM	#13 (permalink)
rgivenspi Wheeler Join Date: Dec 2004 Member # 40787 Location: charlotte, NC Posts: 224	SOLD. Thanks. __________________ Stewart Compensator Build Thread: http://www.pirate4x4.com/forum/showt...ferrerid=40787

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode