FS Dodge '95 V10 running complete Kansas - Pirate4x4.Com : 4x4 and Off-Road Forum

blacksheep10 · 02-07-2007, 06:49 PM

now $450 neg
1995 dodge v-10 for sale. 150,xxx miles on engine. was in '95 dodge 1 ton dually 4x4 with a 5 speed behind it. the truck hit a pole at speed, so the engine was running when this happened. the only damage the engine sustained was 2 bent blades on the fan where the radiator contacted it. front accessories have been removed for removing the engine from the truck. they are all pictured in the foreground of the photos. I kept the whole harness and brain and left them attached to the engine. Since the pull out the brain has been in a plastic walmart bag with a trash bag over it and a plastic tarp on top of the whole engine. I kept the exhaust to just past the O2 sensors. The nv4500 does not come with it. The clutch and pressure plate will come with it for a little more, or we can talk about it.
$450 negotiable. don't be afraid to call and talk about it.
the pictures that aren't below are in my photobucket account right at the top. here is that link:
http://s27.photobucket.com/albums/c172/blacksheep10/
Call me with any questions at all that you might have.
thanks,
Kelly
913.731.3040

blacksheep10 · 02-09-2007, 10:33 AM

top

blacksheep10 · 02-10-2007, 11:15 AM

someone needs a powerplant

American · 02-10-2007, 12:44 PM

This is what I want for my truck, but with the current project, I'll have to pass.

Back to the top for a fellow Kansas-man!

blacksheep10 · 02-13-2007, 09:07 AM

get your money right and call me

blacksheep10 · 02-14-2007, 11:06 AM

top

Pdaddy · 02-14-2007, 01:46 PM

Quote:

Originally Posted by blacksheep10

get your money right and call me

Dont be stealing my daughters line sumbitch !!

blacksheep10 · 02-15-2007, 06:02 AM

Quote:

Originally Posted by Pdaddy

Dont be stealing my daughters line sumbitch !!

how was I to know you would be lurking in the v10 for sale thread

blacksheep10 · 02-17-2007, 12:01 PM

top

blacksheep10 · 02-19-2007, 06:15 AM

$450 neg now. call me
913.731.3040
Kelly

blacksheep10 · 02-21-2007, 05:21 PM

yep

blacksheep10 · 02-22-2007, 04:52 PM

top

blacksheep10 · 02-23-2007, 01:51 PM

top

American · 02-24-2007, 03:21 PM

Hmm... Me wonders how much 47re/241 combos go for...

Back to the top for ya, man.

blacksheep10 · 02-24-2007, 06:40 PM

Quote:

Originally Posted by American

Hmm... Me wonders how much 47re/241 combos go for...

Back to the top for ya, man.

47re's good trannys? which ones are they?

the-great-gonzo · 02-25-2007, 02:53 PM

is this for the engine, tranny, and t-case?
if so what side drop is the t-case ttt for ya

blacksheep10 · 02-25-2007, 04:03 PM

engine, accessories, brain, harness, and fuel pump/sender/everything out of the tank. tranny is the reason I bought the truck to part, I need it for my tow rig. tcase already sold.

American · 02-25-2007, 10:17 PM

They are the autos. I guess it'd be a RH not RE with that year engine. For me though, it wouldn't matter because I'd need a custom harness to run your engine. They seem to be good transmissions though, from what I've heard. They could be stronger, but it IS a Dodge.

end of hijack...

blacksheep10 · 02-26-2007, 05:24 AM

Quote:

Originally Posted by American

They are the autos. I guess it'd be a RH not RE with that year engine. For me though, it wouldn't matter because I'd need a custom harness to run your engine. They seem to be good transmissions though, from what I've heard. They could be stronger, but it IS a Dodge.

end of hijack...

I figured that there was someone that narrowed the factory harness that I have like on the gen III v8's. flash the brain too. if not, maybe that's why this thing hasn't moved. na, it has an nv4500 on the back of it that I need for my truck.

American · 02-27-2007, 01:44 AM

Oh, I am sure there is. Like I said, I WANT THE FUCKER but it's not in my budget at the moment (so I'm trying to help keep it up top for ya

)

The problem that you are having is that lots of Dodge guys are bolt-on-ers. Not me...

edit- Also... People might not know that the Dodge V10 gets better mileage than the Dodge v8's. Both the 318, and the 360 also have less HP and ft/lb's. It does not have the HP/torque that the CTD has but it is very light. I am not sure on all of the numbers exactly but that is the important info!

blacksheep10 · 02-27-2007, 05:41 AM

cool, thanks for the info. On the wheelspacers, they are still on the axle, out behind the shop with tires still on the axle. Kind of been hectic here lately, so haven't had a chance. Will have to run out there sometime and get to that.

blacksheep10 · 02-28-2007, 05:49 AM

light, powerful, cheap, fawk yeah!

BigChevy79 · 02-28-2007, 07:25 PM

Be willing to ship to 46142? Forward Air possibly? Definately pm me about it.

blacksheep10 · 03-01-2007, 06:28 AM

Fo fitty still

blacksheep10 · 03-02-2007, 08:45 AM

someone might finally be nutting up for $450. have to see how much shipping is.

02-07-2007, 06:49 PM	#1 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	FS Dodge '95 V10 running complete Kansas $450 neg now $450 neg 1995 dodge v-10 for sale. 150,xxx miles on engine. was in '95 dodge 1 ton dually 4x4 with a 5 speed behind it. the truck hit a pole at speed, so the engine was running when this happened. the only damage the engine sustained was 2 bent blades on the fan where the radiator contacted it. front accessories have been removed for removing the engine from the truck. they are all pictured in the foreground of the photos. I kept the whole harness and brain and left them attached to the engine. Since the pull out the brain has been in a plastic walmart bag with a trash bag over it and a plastic tarp on top of the whole engine. I kept the exhaust to just past the O2 sensors. The nv4500 does not come with it. The clutch and pressure plate will come with it for a little more, or we can talk about it. $450 negotiable. don't be afraid to call and talk about it. the pictures that aren't below are in my photobucket account right at the top. here is that link: http://s27.photobucket.com/albums/c172/blacksheep10/ Call me with any questions at all that you might have. thanks, Kelly 913.731.3040 Attached Images __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH Last edited by blacksheep10; 02-19-2007 at 06:14 AM.

02-09-2007, 10:33 AM	#2 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	top __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH

02-10-2007, 11:15 AM	#3 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	someone needs a powerplant __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH

02-10-2007, 12:44 PM	#4 (permalink)
American Zeus of the Sluice Join Date: Jun 2002 Member # 12257 Location: Huntsville, AL Posts: 3,718	This is what I want for my truck, but with the current project, I'll have to pass. Back to the top for a fellow Kansas-man! __________________ EB Truggy on 39.5's - *FOR SALE $6,000 obo* TopOffroaders buggy by CBfabwerks: in the works 5.3, th400, np205, hp60, 10.5", 18" CO's, 43's, H1's

02-13-2007, 09:07 AM	#5 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	get your money right and call me __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH

02-14-2007, 11:06 AM	#6 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	top __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH

02-17-2007, 12:01 PM	#9 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	top __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH

02-19-2007, 06:15 AM	#10 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	$450 neg now. call me 913.731.3040 Kelly __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH

02-21-2007, 05:21 PM	#11 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	yep __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH

02-22-2007, 04:52 PM	#12 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	top __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH

02-23-2007, 01:51 PM	#13 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	top __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH

02-24-2007, 03:21 PM	#14 (permalink)
American Zeus of the Sluice Join Date: Jun 2002 Member # 12257 Location: Huntsville, AL Posts: 3,718	Hmm... Me wonders how much 47re/241 combos go for... Back to the top for ya, man. __________________ EB Truggy on 39.5's - *FOR SALE $6,000 obo* TopOffroaders buggy by CBfabwerks: in the works 5.3, th400, np205, hp60, 10.5", 18" CO's, 43's, H1's

02-25-2007, 02:53 PM	#16 (permalink)
the-great-gonzo Registered User Join Date: Feb 2007 Member # 87394 Posts: 49	is this for the engine, tranny, and t-case? if so what side drop is the t-case ttt for ya

02-25-2007, 04:03 PM	#17 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	engine, accessories, brain, harness, and fuel pump/sender/everything out of the tank. tranny is the reason I bought the truck to part, I need it for my tow rig. tcase already sold. __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH

02-25-2007, 10:17 PM	#18 (permalink)
American Zeus of the Sluice Join Date: Jun 2002 Member # 12257 Location: Huntsville, AL Posts: 3,718	They are the autos. I guess it'd be a RH not RE with that year engine. For me though, it wouldn't matter because I'd need a custom harness to run your engine. They seem to be good transmissions though, from what I've heard. They could be stronger, but it IS a Dodge. end of hijack... __________________ EB Truggy on 39.5's - *FOR SALE $6,000 obo* TopOffroaders buggy by CBfabwerks: in the works 5.3, th400, np205, hp60, 10.5", 18" CO's, 43's, H1's

02-27-2007, 01:44 AM	#20 (permalink)
American Zeus of the Sluice Join Date: Jun 2002 Member # 12257 Location: Huntsville, AL Posts: 3,718	Oh, I am sure there is. Like I said, I WANT THE FUCKER but it's not in my budget at the moment (so I'm trying to help keep it up top for ya ) The problem that you are having is that lots of Dodge guys are bolt-on-ers. Not me... edit- Also... People might not know that the Dodge V10 gets better mileage than the Dodge v8's. Both the 318, and the 360 also have less HP and ft/lb's. It does not have the HP/torque that the CTD has but it is very light. I am not sure on all of the numbers exactly but that is the important info! __________________ EB Truggy on 39.5's - *FOR SALE $6,000 obo* TopOffroaders buggy by CBfabwerks: in the works 5.3, th400, np205, hp60, 10.5", 18" CO's, 43's, H1's Last edited by American; 02-27-2007 at 01:46 AM.

02-27-2007, 05:41 AM	#21 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	cool, thanks for the info. On the wheelspacers, they are still on the axle, out behind the shop with tires still on the axle. Kind of been hectic here lately, so haven't had a chance. Will have to run out there sometime and get to that. __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH

02-28-2007, 05:49 AM	#22 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	light, powerful, cheap, fawk yeah! __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH

02-28-2007, 07:25 PM	#23 (permalink)
BigChevy79 Registered User Join Date: Dec 2006 Member # 84161 Location: Greenwood, IN Posts: 279	Be willing to ship to 46142? Forward Air possibly? Definately pm me about it. __________________ 2011 Silverado: Getting Rocks, 46" MVTs, and looking to tear shit up

03-01-2007, 06:28 AM	#24 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	Fo fitty still __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH

03-02-2007, 08:45 AM	#25 (permalink)
blacksheep10 Vertical Limits Join Date: Jan 2004 Member # 26443 Location: Paola, KS, smelling the burn table fumes Posts: 4,115	someone might finally be nutting up for $450. have to see how much shipping is. __________________ Kelly Kaiser Vertical Limits Inc 913.731.3040 Atomic Fabworks (my new full time shop) www.atomicfabworks.com 913.839.8450 Your ORI struts, Solid and Rod End Supply dealer! team Nasty co dog. FINISHED KOH

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode