Feeler - ZF 6 speed manual tranny - Pirate4x4.Com : 4x4 and Off-Road Forum

1989toy · 04-10-2008, 02:02 PM

I will have a tranny up for sale in about a month or so. It is a ZF-6 speed out of a 99 f-250 diesel 4x4. Third is slowly on their way out (hard to get into gear sometimes) but low, 1st, 2nd, 4th, and 5th work perfect. The tranny has 212,000 miles on it. These rebuilt go for about $1,800...good for a crawler (if you can get it to fit). Like I said, 3rd is going but is definitly not completely gone...most of the time it will work without having to force it. I am thinking $600 (OBO) for the tranny. If anybody has any offer or better price range for it let me know.

I have no problem getting it on a pallet and helping out any way I can, but the actual shipping cost will be up to the buyer. I have looked around and have seen them shipped from around 100 bucks up to almost 200.

1989toy · 04-11-2008, 06:00 AM

ttt - offers are more than welcome.

1989toy · 04-13-2008, 11:35 AM

$800? Any offers?

1989toy · 04-14-2008, 02:39 PM

ttt

senatorfrisky · 04-14-2008, 05:21 PM

if i can figure out how to get it behind a SBC... then i'd be WAYYY interested any helpful info?

1989toy · 04-14-2008, 08:59 PM

I did a little research tonight (about 10 min worth) and haven't found anything yet. You have me curious though so I will keep looking around to see if anybody makes an adapter.

senatorfrisky · 04-15-2008, 12:29 PM

yeah... my google skills must be lacking on this subject.
i can find how to adapt a t-19 to a sbc.... sheeot.

1989toy · 04-15-2008, 03:49 PM

Biggest problem that I see is that the bellhousing on the ZF that I have is not removable. Not sure if it would work with the shortblock. You could always say screw it and throw in a 7.3 diesel

. I will keep looking though. Anybody have any other ideas?

1989toy · 04-16-2008, 09:42 AM

ttt...still looking though.

1989toy · 04-17-2008, 07:41 AM

From what I found it does not look like you can adapt this ZF to a sbc. Anybody have any offers?

1989toy · 04-17-2008, 12:41 PM

$700???

1989toy · 04-18-2008, 08:22 AM

ttt

1989toy · 04-18-2008, 12:11 PM

OK...$600...I am desperate here!

masterbeavis · 04-20-2008, 11:53 AM

Will this bolt up to the older 6.9's?

1989toy · 04-20-2008, 05:21 PM

I searched and the only thing I could find was that it has been done. Here is the link to the forum http://www.thedieselstop.com/forums/...d-swap-154509/ I am not a part of that forum so I couldn't search for the guy names "jaybee" that they were talking about.

1989toy · 04-21-2008, 12:58 PM

ttt for just a little longer...remember that offers are more than welcome so shoot some prices at me

1989toy · 04-22-2008, 09:23 AM

ttt

1989toy · 04-22-2008, 07:21 PM

Tranny will be out of the truck on May 3rd.

1989toy · 04-23-2008, 06:17 PM

296 views and not a single offer...damn

By the way, I do know that they make adapters to add the ZF 6 speed to a dodge 5.9L cummins...just in case anybody was wondering about that one. There is actually an adapter on e-bay right now...
http://cgi.ebay.com/ebaymotors/5-9L-...QQcmdZViewItem

Another one just in case anybody is curious about putting a cummins into a ford...
http://www.fordcummins.com/

1989toy · 04-25-2008, 11:55 AM

ttt

1989toy · 04-26-2008, 08:36 AM

I have only had one offer the entire time this has been up. Like I said, offers were MORE than welcome. Just to let everybody know that was interested...the tranny is SOLD for $200.

04-10-2008, 02:02 PM	#1 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	Feeler - ZF 6 speed manual tranny I will have a tranny up for sale in about a month or so. It is a ZF-6 speed out of a 99 f-250 diesel 4x4. Third is slowly on their way out (hard to get into gear sometimes) but low, 1st, 2nd, 4th, and 5th work perfect. The tranny has 212,000 miles on it. These rebuilt go for about $1,800...good for a crawler (if you can get it to fit). Like I said, 3rd is going but is definitly not completely gone...most of the time it will work without having to force it. I am thinking $600 (OBO) for the tranny. If anybody has any offer or better price range for it let me know. I have no problem getting it on a pallet and helping out any way I can, but the actual shipping cost will be up to the buyer. I have looked around and have seen them shipped from around 100 bucks up to almost 200. __________________ He who dies with the most toys...still dies. Last edited by 1989toy; 04-18-2008 at 12:12 PM. Reason: 4th is working perfect...just not 3rd

04-11-2008, 06:00 AM	#2 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	ttt - offers are more than welcome. __________________ He who dies with the most toys...still dies. Last edited by 1989toy; 04-11-2008 at 06:01 AM.

04-13-2008, 11:35 AM	#3 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	$800? Any offers? __________________ He who dies with the most toys...still dies. Last edited by 1989toy; 04-13-2008 at 12:52 PM.

04-14-2008, 02:39 PM	#4 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	ttt __________________ He who dies with the most toys...still dies.

04-14-2008, 08:59 PM	#6 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	I did a little research tonight (about 10 min worth) and haven't found anything yet. You have me curious though so I will keep looking around to see if anybody makes an adapter. __________________ He who dies with the most toys...still dies.

04-14-2008, 05:21 PM	#5 (permalink)
senatorfrisky Registered User Join Date: Feb 2005 Member # 42843 Posts: 318	if i can figure out how to get it behind a SBC... then i'd be WAYYY interested any helpful info?

04-15-2008, 12:29 PM	#7 (permalink)
senatorfrisky Registered User Join Date: Feb 2005 Member # 42843 Posts: 318	yeah... my google skills must be lacking on this subject. i can find how to adapt a t-19 to a sbc.... sheeot.

04-15-2008, 03:49 PM	#8 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	Biggest problem that I see is that the bellhousing on the ZF that I have is not removable. Not sure if it would work with the shortblock. You could always say screw it and throw in a 7.3 diesel . I will keep looking though. Anybody have any other ideas? __________________ He who dies with the most toys...still dies.

04-16-2008, 09:42 AM	#9 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	ttt...still looking though. __________________ He who dies with the most toys...still dies.

04-17-2008, 07:41 AM	#10 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	From what I found it does not look like you can adapt this ZF to a sbc. Anybody have any offers? __________________ He who dies with the most toys...still dies. Last edited by 1989toy; 04-17-2008 at 07:41 AM.

04-17-2008, 12:41 PM	#11 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	$700??? __________________ He who dies with the most toys...still dies.

04-18-2008, 08:22 AM	#12 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	ttt __________________ He who dies with the most toys...still dies.

04-18-2008, 12:11 PM	#13 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	OK...$600...I am desperate here! __________________ He who dies with the most toys...still dies.

04-20-2008, 11:53 AM	#14 (permalink)
masterbeavis Registered User Join Date: Jan 2002 Member # 9468 Location: Eldorado BFE, East of sac Posts: 2,827	Will this bolt up to the older 6.9's?

04-20-2008, 05:21 PM	#15 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	I searched and the only thing I could find was that it has been done. Here is the link to the forum http://www.thedieselstop.com/forums/...d-swap-154509/ I am not a part of that forum so I couldn't search for the guy names "jaybee" that they were talking about. __________________ He who dies with the most toys...still dies. Last edited by 1989toy; 04-20-2008 at 05:22 PM.

04-21-2008, 12:58 PM	#16 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	ttt for just a little longer...remember that offers are more than welcome so shoot some prices at me __________________ He who dies with the most toys...still dies. Last edited by 1989toy; 04-21-2008 at 12:59 PM.

04-22-2008, 09:23 AM	#17 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	ttt __________________ He who dies with the most toys...still dies.

04-22-2008, 07:21 PM	#18 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	Tranny will be out of the truck on May 3rd. __________________ He who dies with the most toys...still dies.

04-23-2008, 06:17 PM	#19 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	296 views and not a single offer...damn By the way, I do know that they make adapters to add the ZF 6 speed to a dodge 5.9L cummins...just in case anybody was wondering about that one. There is actually an adapter on e-bay right now... http://cgi.ebay.com/ebaymotors/5-9L-...QQcmdZViewItem Another one just in case anybody is curious about putting a cummins into a ford... http://www.fordcummins.com/ __________________ He who dies with the most toys...still dies. Last edited by 1989toy; 04-23-2008 at 06:30 PM.

04-25-2008, 11:55 AM	#20 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	ttt __________________ He who dies with the most toys...still dies.

04-26-2008, 08:36 AM	#21 (permalink)
1989toy Registered User Join Date: Aug 2007 Member # 97992 Location: Pinetop/lakeside AZ Posts: 131	I have only had one offer the entire time this has been up. Like I said, offers were MORE than welcome. Just to let everybody know that was interested...the tranny is SOLD for $200. __________________ He who dies with the most toys...still dies.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode