Dodge 318, 4spd tran, np205 - Pirate4x4.Com : 4x4 and Off-Road Forum

fastbeeatch · 10-22-2008, 05:18 PM

Everything came out of 82 Dodge w350. Motor has Holley fuel injection on it complete, motor ran good before I pulled it no smoke starts first turn of the crank. 4 spd manual shifts fine, I don't want to seperate tranny from motor. I want $200 for tran and motor. I'm located in Western MA, will not ship but could deliver a short ways for right money.

fastbeeatch · 10-24-2008, 03:58 PM

buuuuuuuuuuuuuuuuuuuummmmmmmmmmmp

fastbeeatch · 10-26-2008, 03:49 PM

nobody wants a cheap reliable drivetrain

fastbeeatch · 10-28-2008, 04:20 PM

ttttttttttttttt

420willys · 10-29-2008, 05:58 PM

bump for you pat, this is a good deal. i might grab that 205 if no one else does or if your not going to use it.
jason.

fastbeeatch · 11-01-2008, 02:06 PM

bump

fastbeeatch · 11-08-2008, 06:36 AM

top

420willys · 11-08-2008, 04:19 PM

im getting another dana 300 next week i will trade you for that 205. call me when i can come up and see the jeep and i will bring the dana 300.
jason.

fastbeeatch · 11-08-2008, 05:42 PM

will the 300 bolt up to the dodge tranny, i'll trade either way i'm probably going to keep motor since no one seems intersted. i'll just have to find an auto to match motor and case.

fastbeeatch · 11-13-2008, 03:12 PM

Back to top

fastbeeatch · 11-13-2008, 03:13 PM

Hey Jason have picked up the 300 yet and are you still interested in trade.

420willys · 11-13-2008, 08:26 PM

Quote:

Originally Posted by fastbeeatch

Hey Jason have picked up the 300 yet and are you still interested in trade.

not yet but no matter waht i still have a few extra's and yes i can use the 205.
jason.

fastbeeatch · 11-25-2008, 04:46 PM

yo mama said back that ass up to the top

420willys · 11-27-2008, 08:55 PM

bump for ya pat.
jason.

some zilch · 11-28-2008, 06:12 PM

how far outta new york state are you?

420willys · 11-28-2008, 06:34 PM

Quote:

Originally Posted by some zilch

how far outta new york state are you?

he's around 20-25 minute's east of sprinfield if your heading down the PIKE ( interstate 90 ). i would say that the NY boarder from springfiled ( agin if your on the PIKE ) is 1.5 hours or so.
jason.

some zilch · 11-28-2008, 06:43 PM

little further than i wanted to go....good luck anyhow

fastbeeatch · 12-04-2008, 04:06 PM

bump bitty bump bump

fastbeeatch · 12-14-2008, 02:16 PM

Bump will trade for items below
Torches with tanks
bench top grinder
plasma cutter
milling machine
drill press
band saw
H1 wheels and 36" tires
Any other fabbing tools

fastbeeatch · 12-28-2008, 10:00 AM

Bump
will trade for items below
Torches with tanks
bench top grinder
plasma cutter
milling machine
drill press
band saw
H1 wheels and 36" tires
Any other fabbing tools

fastbeeatch · 01-02-2009, 01:15 PM

perfect winter project have v8 by spring

OldCreek · 01-09-2009, 05:50 PM

In regards to the NP205, would you consider shipping to California for the right price?

Wil
805-878-5525

420willys · 01-09-2009, 08:04 PM

Quote:

Originally Posted by OldCreek

In regards to the NP205, would you consider shipping to California for the right price?

Wil
805-878-5525

he traded the case to me. whats the right price she's a heavy bitch but all complete even with the spud shaft.

jason.

fastbeeatch · 04-15-2009, 03:09 PM

Price reduced $200 takes it I need this out of my driveway

fastbeeatch · 04-20-2009, 05:47 PM

dang a running motor with tranny for 2 bills and no takers

10-22-2008, 05:18 PM	#1 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	Dodge 318, 4spd tran, np205 Everything came out of 82 Dodge w350. Motor has Holley fuel injection on it complete, motor ran good before I pulled it no smoke starts first turn of the crank. 4 spd manual shifts fine, I don't want to seperate tranny from motor. I want $200 for tran and motor. I'm located in Western MA, will not ship but could deliver a short ways for right money. __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear Last edited by fastbeeatch; 04-15-2009 at 03:11 PM.

10-24-2008, 03:58 PM	#2 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	buuuuuuuuuuuuuuuuuuuummmmmmmmmmmp __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

10-26-2008, 03:49 PM	#3 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	nobody wants a cheap reliable drivetrain __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

10-28-2008, 04:20 PM	#4 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	ttttttttttttttt __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

10-29-2008, 05:58 PM	#5 (permalink)
420willys Registered User Join Date: Oct 2003 Member # 23452 Location: holland mass USA Posts: 2,050	bump for you pat, this is a good deal. i might grab that 205 if no one else does or if your not going to use it. jason. __________________ 93 yj 4.0 700r/241 HP 60 front 5.38's, Chevy 60 rearsteer 5.38's, bolth spooled and beating it like it owes me money. Last edited by 420willys; 10-29-2008 at 06:01 PM.

11-01-2008, 02:06 PM	#6 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	bump __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

11-08-2008, 06:36 AM	#7 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	top __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

11-08-2008, 04:19 PM	#8 (permalink)
420willys Registered User Join Date: Oct 2003 Member # 23452 Location: holland mass USA Posts: 2,050	im getting another dana 300 next week i will trade you for that 205. call me when i can come up and see the jeep and i will bring the dana 300. jason. __________________ 93 yj 4.0 700r/241 HP 60 front 5.38's, Chevy 60 rearsteer 5.38's, bolth spooled and beating it like it owes me money.

11-08-2008, 05:42 PM	#9 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	will the 300 bolt up to the dodge tranny, i'll trade either way i'm probably going to keep motor since no one seems intersted. i'll just have to find an auto to match motor and case. __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

11-13-2008, 03:12 PM	#10 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	Back to top __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

11-13-2008, 03:13 PM	#11 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	Hey Jason have picked up the 300 yet and are you still interested in trade. __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

11-25-2008, 04:46 PM	#13 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	yo mama said back that ass up to the top __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

11-27-2008, 08:55 PM	#14 (permalink)
420willys Registered User Join Date: Oct 2003 Member # 23452 Location: holland mass USA Posts: 2,050	bump for ya pat. jason. __________________ 93 yj 4.0 700r/241 HP 60 front 5.38's, Chevy 60 rearsteer 5.38's, bolth spooled and beating it like it owes me money.

11-28-2008, 06:12 PM	#15 (permalink)
some zilch one handed mechanic Join Date: Aug 2008 Member # 119289 Location: too far gone Posts: 731	how far outta new york state are you? __________________ Looking for a REASONABLY priced 12v cummins.........

11-28-2008, 06:43 PM	#17 (permalink)
some zilch one handed mechanic Join Date: Aug 2008 Member # 119289 Location: too far gone Posts: 731	little further than i wanted to go....good luck anyhow __________________ Looking for a REASONABLY priced 12v cummins.........

12-04-2008, 04:06 PM	#18 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	bump bitty bump bump __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

12-14-2008, 02:16 PM	#19 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	Bump will trade for items below Torches with tanks bench top grinder plasma cutter milling machine drill press band saw H1 wheels and 36" tires Any other fabbing tools __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

12-28-2008, 10:00 AM	#20 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	Bump will trade for items below Torches with tanks bench top grinder plasma cutter milling machine drill press band saw H1 wheels and 36" tires Any other fabbing tools __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

01-02-2009, 01:15 PM	#21 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	perfect winter project have v8 by spring __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

01-09-2009, 05:50 PM	#22 (permalink)
OldCreek Registered User Join Date: Dec 2008 Member # 126302 Posts: 9	In regards to the NP205, would you consider shipping to California for the right price? Wil 805-878-5525

04-15-2009, 03:09 PM	#24 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	Price reduced $200 takes it I need this out of my driveway __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

04-20-2009, 05:47 PM	#25 (permalink)
fastbeeatch Registered User Join Date: Apr 2006 Member # 71859 Location: Palmer, MA Posts: 143	dang a running motor with tranny for 2 bills and no takers __________________ 95 Wrangler, 4.0, Auto, Dana 300 TC, 103" Wheelbase, D60 Front, 14 Bolt Rear

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode